BS 5385-2-2015 Wall and floor tiling Design and installation of external ceramic natural stone and mosaic wall tiling in normal conditions Code of practice《墙壁和地板贴砖 正常条件下外部陶瓷 天然石材 马.pdf

《BS 5385-2-2015 Wall and floor tiling Design and installation of external ceramic natural stone and mosaic wall tiling in normal conditions Code of practice《墙壁和地板贴砖 正常条件下外部陶瓷 天然石材 马.pdf》由会员分享，可在线阅读，更多相关《BS 5385-2-2015 Wall and floor tiling Design and installation of external ceramic natural stone and mosaic wall tiling in normal conditions Code of practice《墙壁和地板贴砖 正常条件下外部陶瓷 天然石材 马.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS 5385-2:2015Wall and floor tiling Part 2: Design and installation ofexternal ceramic, natural stone andmosaic wall tiling in normalconditions Code of practicePublishing and copyright informationThe BSI copyright notice displayed in this document indicates when the document

2、was last issued. The British Standards Institution 2015Published by BSI Standards Limited 2015ISBN 978 0 580 84041 8ICS 91.060.10; 91.060.30The following BSI references relate to the work on this document:Committee reference B/539Draft for comment 14/30288665 DCPublication historyFirst published Feb

3、ruary 1978Second edition, January 1992Third edition, September 2006Fourth (present) edition, April 2015Amendments issued since publicationDate Text affectedBS 5385-2:2015 BRITISH STANDARDContentsForeword ii1 Scope 12 Normative references 13 Terms and definitions 24 Exchange of information and time s

4、chedule 35 Materials 56 Design 87 Backgrounds 118 Preparation of backgrounds 159 Cement and sand rendering 1910 Movement joints 2311 Application of tiles methods and materials 2712 Bedding in adhesives 2813 Tile joint treatment 2914 Application of mosaics methods and materials 3115 Setting out 3216

5、Preparation of mosaics 3217 Adhesive bedding methods for mosaics 3318 Application of mosaics 3319 Grouting of mosaics 3320 Glass mosaics 3321 Cleaning and maintenance 34AnnexesAnnex A (informative) Ceramic tiles and mosaics 35Annex B (informative) Natural stone descriptions 35Bibliography 37List of

6、figuresFigure 1 Illustration of selected definitions 2Figure2Typical movement joint details in external wall tiling 25Figure 3 Position of movement joints in concrete frame construction atabutment of brick/block infill 26List of tablesTable 1 Classification of ceramic tiles with respect to water abs

7、orption (E) andshaping 5Table 2 Backgrounds: direct fixing 13Table 3 Backgrounds: requiring rendering 14Summary of pagesThis document comprises a front cover, an inside front cover, pages i to iv,pages 1 to 38, an inside back cover and a back cover.BRITISH STANDARD BS 5385-2:2015 The British Standar

8、ds Institution 2015 iForewordPublishing informationThis part of BS 5385 is published by BSI Standards Limited, under licence fromThe British Standards Institution, and came into effect on 30 April 2015. It wasprepared by Technical Committee B/539, Ceramic tiles and other rigid tiling.Alist of organi

9、zations represented on this committee can be obtained on requestto its secretary.SupersessionThis part of BS 5385 supersedes BS 5385-2:2006, which is withdrawn.Relationship with other publicationsThis part of BS 5385 is one of a series dealing with the installation of floor andwall tiling the other

10、parts being: Part 1: Design and installation of ceramic natural stone and mosaic walltiling in normal internal conditions Code of practice Part 3: Design and installation of internal and external ceramic and mosaicfloor tiling in normal conditions Code of practice Part 4: Design and installation of

11、ceramic and mosaic tiling in specialconditions Code of practice Part 5: Design and installation of terrazzo, natural stone, agglomeratedstone tile and slab flooring Code of practiceInformation about this documentThis is a full revision of the standard, and introduces the following principalchanges.

12、includes recommendations on natural stone. expanded cement and sand mortar information. restrictions on mesh-backed mosaics above 3 m. includes repairs in existing buildings.Use of this documentAs a code of practice, this part of BS 5385 takes the form of guidance andrecommendations. It should not b

13、e quoted as if it were a specification andparticular care should be taken to ensure that claims of compliance are notmisleading.Any user claiming compliance with this part of BS 5385 is expected to be able tojustify any course of action that deviates from its recommendations.Presentational conventio

14、nsThe provisions of this standard are presented in roman (i.e. upright) type. Itsrecommendations are expressed in sentences in which the principal auxiliaryverb is “should”.Commentary, explanation and general informative material is presented insmaller italic type, and does not constitute a normativ

15、e element.Contractual and legal considerationsThis publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application.BRITISH STANDARDBS 5385-2:2015ii The British Standards Institution 2015Compliance with a British Standard cannot con

16、fer immunity from legalobligations.Particular attention is drawn to the following specific regulations: Building and Construction Regulations under the Factories Act 1 Lifting Operations and Lifting Equipment Regulations 2 Manual Handling Operations Regulations 3.BRITISH STANDARD BS 5385-2:2015 The

17、British Standards Institution 2015 iiiBRITISH STANDARDBS 5385-2:2015This page deliberately left blankiv The British Standards Institution 20151 ScopeThis part of BS 5385 gives recommendations for the design and installation ofexternal ceramic, natural stone and mosaic wall tiles in normal climaticco

18、nditions in the UK. It deals with the types of backgrounds and their suitabilityto receive tiling using the following fixing methods:a) bedding in cementitious or reaction resin adhesives on an intermediatesubstrate or as a direct bedding method;b) bedding mosaics in cement and sand mortar on render

19、ing or as a directbedding method on appropriate backgrounds.NOTE Cement and sand mortar is seldom used as the bed for external wall tilingbut, if needed, see BS 5385-1.2 Normative referencesThe following referenced documents are indispensable for the application ofthis document. For dated references

20、, only the edition cited applies. For undatedreferences, the latest edition of the referenced document (including anyamendments) applies.BS 410-1, Test sieves Technical requirements and testing Part 1: Test sieves ofmetal wire clothBS 1210, Specification for wood screwsBS 4483, Steel fabric for the

21、reinforcement of concrete SpecificationBS 4551, Mortar Methods of test for mortar Chemical analysis and physicaltestingBS 5385-1, Wall and floor tiling Part 1: Design and installation of ceramicnatural stone and mosaic wall tiling in normal internal conditions Code ofpracticeBS 5974, Code of practic

22、e for the planning, design, setting up and use oftemporary suspended access equipmentBS 6100-6, Building and civil engineering Vocabulary Part 6: ConstructionpartsBS 6213, Selection of construction sealants GuideBS 8000-11, Workmanship on building sites Part 11: Internal and external walland floor t

23、iling Ceramic and agglomerated stone tiles, natural stone andterrazzo tiles and slabs, and mosaics Code of PracticeBS EN 197-1, Cement Part 1: Composition, specifications and conformity criteriafor common cementsBS EN 12004:2001, Adhesives for ceramic tiles Requirements, evaluation ofconformity, cla

24、ssification and designation BS EN 12057, Natural stone products Modular tiles RequirementsBS EN 12371, Natural stone test methods Determination of frost resistanceBS EN 13139:2002, Aggregates for mortarBS EN 13888:2009, Grouts for tiles Requirements, evaluation of conformity,classification and desig

25、nationBS EN 13914-1:2005, Design, preparation and application of external renderingand internal plastering Part 1: External renderingBS EN 14411:2012, Ceramic tiles Definitions, classification, characteristics,evaluation of conformity and markingBRITISH STANDARD BS 5385-2:2015 The British Standards

26、Institution 2015 1BS EN 14647:2005, Calcium aluminate cement Composition, specifications andconformity criteriaBS EN ISO 10545-12, Ceramic tiles Part 12: Determination of frost resistance3 Terms and definitionsNOTE An illustration of some selected definitions is shown in Figure 1.For the purposes of

27、 this part of BS 5385 the terms and definitions given inBS 6100-6, BS EN 14411 and the following apply.3.1 bond breaker tapeself-adhesive tape, used to prevent sealant sticking to a substrateFigure 1 Illustration of selected definitionsKey1 Adhesive bed 5 Tile or tesserae2 Reinforcement (optional) 6

28、 Joint3 Cement and sand rendering 7 Grout4 Fixing 8 Structured wallBRITISH STANDARDBS 5385-2:20152 The British Standards Institution 20154 Exchange of information and time scheduleNOTE Clause 4 deals with the exchange of information for the whole wall,including tiles, tile bed, background and interm

29、ediate substrate (if any).4.1 Exchange of informationThe working drawings and specifications should be prepared in sufficient detailto afford proper guidance in the design and execution of the work. At thetendering stage the following information should be sought and documented:a) Site. Location and

30、 means of access;b) Building. Nature of building and particulars of corrosive or other potentiallydamaging conditions to which the installation might be subjected in service(e.g. mechanical cleaning);c) Wall(s). Type and age of construction, location, height, type and accuracy ofbackgrounds and need

31、 for intermediate substrate or special mechanicalfixing systems (see 6.5);NOTE Permissible deviations from horizontal and perpendicular lines inbuilding construction are usually greater than appropriate for ceramic tiling ormosaic finishes.d) Associated work. Elements embedded in or passing through

32、the wall,skirtings and abutments, junctions with other adjacent finishes;e) Finishes. Type(s) of tiles and/or mosaics, bedding and jointing requirementsand required surface plane;f) Contract. Details, if the work is to be completed in any specific order or insections;g) Health and safety. Informatio

33、n on articles and substances for use during thework that is liable to be a health risk;h) Time schedule. A time schedule for the progress of the work (see 4.3); andi) Testing. Details of any installation compliance testing required.4.2 Provision of utilities, facilities and materialsTo prevent misun

34、derstanding, particularly at the tendering stage, and to avoidpossible situations detrimental to installation, it should be made clear whetheror not the following is provided and by whom:a) adequate clean, dry, lockable storage space protected from frost (ifnecessary) (see 5.1);b) clean water supply

35、 adjacent to working areas;c) adequate artificial lighting (if necessary), e.g. for tiling within a protectedenclosure;d) safe means of access and places of work, to include, where necessary,suitable scaffolding and staging, which should conform to BS 5974;NOTE 1 Attention is drawn to the requiremen

36、ts of the Building andConstruction Regulations under the Factories Act 1.e) unloading and hoisting facilities;NOTE 2 The following references are valid: Lifting Operations and LiftingEquipment Regulations 2, Manual Handling Operations Regulations 3.f) electric power supply adjacent to working areas;

37、g) protection of work during and after fixing (see 6.3);BRITISH STANDARD BS 5385-2:2015 The British Standards Institution 2015 3h) supplies of cement and sand in accordance with 9.2.1 and 9.2.2; andi) tiles, adhesives, grouts, primers and sealants.A check should be made to ensure that all materials

38、needed for the installationare available.4.3 Time scheduleThe time schedule for the whole building work should be planned in the initialstages before operations commence and, where possible, in consultation withthose responsible for carrying out the work of each of the trades concerned.In preparing

39、the time schedule, each operation should be considered in relationto others. Due consideration should be given to the most economical use ofgeneral plant and scaffolding by all trades, also to ensure that the various tradesdo not interfere unduly with each others work.For economic and efficient appl

40、ication of external tiling and mosaics, workshould begin at the highest point of the construction. In addition, in certainforms of a multi-storey construction, some deflection of the wall can occur atlower levels as the construction increases in height and the loading consequentlyincreases. It is im

41、portant, therefore, that application of tile or mosaic tilingshould not commence until the construction has been erected to its full height.At least six weeks should be allowed in the time schedule for the drying out andinitial shrinkage of the structural or non-structural concrete. If an intermedia

42、tesubstrate e.g. rendering is subsequently applied, each coat should be cured,allowed to dry and harden in accordance with BS EN 13914-1 to permit dryingshrinkage before the final coat is applied. The final coat should be cured andleft to dry for at least a further two weeks. The drying times of all

43、 in situbackgrounds are the minimum required under optimum conditions and thesedrying times should be considerably extended under adverse drying conditionson site, e.g. low temperatures and wet conditions.The schedule should allow sufficient time for the cutting of holes and chasesand/or other work

44、involving the use of percussion tools in or on the walls toreceive a bedded finish, and adjacent walls, to be completed before a substrateis applied. All the time allowances mentioned are equally applicable where asubstrate is to be omitted and the tile or mosaic finish bedded directly to thestructu

45、ral background.NOTE Cutting holes in natural stone might need to be carried out at the factory. Ifundertaken on site, use only equipment that will not result in damage to the stone.For some types of natural stone, e.g. granite such work can only be carried out withcorrect dust control.The schedule s

46、hould provide for the completion of all necessary subsidiary workbefore the fixing of tiles or mosaics begins. The schedule should include timesfor commencement and completion of tiling or mosaic work to the differentparts of the construction, allowing sufficient time intervals between theoperation

47、of the bedding, grouting and final cleaning down.Provision should be made for adjustment to allow for suspension of operationsdue to frost or other unfavourable weather or other conditions that jeopardizethe safety of workers and/or the success of the installation.Alternatively, consideration should

48、 be given to the possibility of providing aprotective enclosure, e.g. cocooning, to enable work to continue duringunfavourable conditions. In addition, heating might be necessary.BRITISH STANDARDBS 5385-2:20154 The British Standards Institution 20155 Materials5.1 Transport and storageThe delivery of

49、 materials should be arranged to minimize handling. Adequateprecautions should be taken to guard against the possibility of damage.Materials should be stored in clean, dry, frost-free (if necessary), lockable storageto avoid excessive handling, theft or damage.5.2 Ceramic tilesCeramic tiles for external use up to 3 m should have water absorption of notmore than 3% and should either be extruded tiles type AIaor Albordust-pressed tiles types BIaand BIb(see Table 1 and 6.3