ASTM F2974-2013 Standard Guide for Auditing Amusement Rides and Devices《游乐乘骑设施检验的标准指南》.pdf
《ASTM F2974-2013 Standard Guide for Auditing Amusement Rides and Devices《游乐乘骑设施检验的标准指南》.pdf》由会员分享,可在线阅读,更多相关《ASTM F2974-2013 Standard Guide for Auditing Amusement Rides and Devices《游乐乘骑设施检验的标准指南》.pdf(2页珍藏版)》请在麦多课文档分享上搜索。
1、Designation: F2974 13Standard Guide forAuditing Amusement Rides and Devices1This standard is issued under the fixed designation F2974; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parenthes
2、es indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This guide establishes guidelines for auditing confor-mance to ASTM Committee F24 Standards during an audit ofan amusement ride or device within a defined
3、 scope.1.2 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2. Refer
4、enced Documents2.1 ASTM Standards:2F747 Terminology Relating to Amusement Rides and De-vicesF770 Practice for Ownership, Operation, Maintenance, andInspection of Amusement Rides and DevicesF1159 Practice for Design and Manufacture of PatronDirected, Artificial Climbing Walls, Dry Slide, CoinOperated
5、 and Purposeful Water Immersion AmusementRides and Devices and Air-Supported StructuresF1193 Practice for Quality, Manufacture, and Constructionof Amusement Rides and DevicesF2291 Practice for Design of Amusement Rides and Devices3. Terminology3.1 Reference Terminology F747.4. Significance and Use4.
6、1 The purpose of this guide is to establish guidelines foraudits of amusement rides and devices.4.2 An audit can include inspections, evaluations, or exami-nations during the design, manufacturing, installation,commissioning, operation, or major modification of an amuse-ment ride or device.4.3 This
7、guide is not intended to require recurring design,manufacturing, installation, commissioning or major modifica-tion audits. Rather, it is intended that such audits be performedduring the relevant stages of an amusement ride or devicesdesign, manufacture, installation, commissioning or majormodificat
8、ion.5. General5.1 Auditor(s) shall have sufficient relevant education,experience, and training to properly audit an amusement ride ordevice as defined in this standard.5.2 The auditor must prepare for and comply with allpersonal health and safety requirements as they pertain to thescope of the audit
9、.5.3 Inspection tools, test equipment, gauges, or other de-vices shall be in proper working order and, where applicable,calibrated. Calibration shall be established by a record ofcalibration showing calibration traceable to accepted standardsspecific to the equipment used (for example, AISC, ASME,AN
10、SI, etc.).6. Design Audit Program6.1 When performing an audit of a new design of anamusement ride or device, the auditor shall review confor-mance to Practice F2291 or the applicable F24 standard ineffect at the time of the design.7. Manufacturing Audit Program7.1 When performing an audit of the man
11、ufacturing of anamusement ride or device, the auditor(s) shall review confor-mance to Practice F1193.8. Installation and Commissioning Audit Program8.1 When performing an audit of the installation and com-missioning of an amusement ride or device, the auditor(s)shall:8.1.1 Perform an inspection of e
12、quipment condition perSection 9 through Section 13 of Practice F1193.8.1.2 Review conformance to Practice F770.9. Major Modification Audit Program9.1 When performing an audit of the design of an amuse-ment ride or device, the auditor shall review conformance that1This test method is under the jurisd
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASTMF29742013STANDARDGUIDEFORAUDITINGAMUSEMENTRIDESANDDEVICES 游乐 设施 检验 标准 指南 PDF

链接地址:http://www.mydoc123.com/p-539838.html