[外语类试卷]大学英语四级模拟试卷538及答案与解析.doc
《[外语类试卷]大学英语四级模拟试卷538及答案与解析.doc》由会员分享,可在线阅读,更多相关《[外语类试卷]大学英语四级模拟试卷538及答案与解析.doc(28页珍藏版)》请在麦多课文档分享上搜索。
1、大学英语四级模拟试卷 538及答案与解析 一、 Part I Writing (30 minutes) 1 For this part, you are allowed 30 minutes to write an essay entitled On Conserving Energy. You should write at least 120 words following the outline given below in Chinese: 1. 能源短缺问题已非常严重; 2. 可以采取节能措施解决能源短缺问题; 3. 你的看法。 二、 Part II Reading Comprehe
2、nsion (Skimming and Scanning) (15 minutes) Directions: In this part, you will have 15 minutes to go over the passage quickly and answer the questions attached to the passage. For questions 1-7, mark: Y (for YES) if the statement agrees with the information given in the passage; N (for NO) if the sta
3、tement contradicts the information given in the passage; NG (for NOT GIVEN) if the information is not given in the passage. 1 Panasonic NV-F55MC operating Instructions . Installation ( ) Connection to a TV set 1. Connect the external aerial (天线 ) to the RF Input Socket (插座 ) on the VTR (Videotape Re
4、corder). 2. Connect the aerial terminal on your TV set to the RF Output Socket on the VTR with the supplied DIN-DIN Coaxial Cable. In places with higher temperature and high humidity (湿度 ), people with sensitive skin may feel some electricity. In this case, use the Separate Transformer Adaptor. 3. C
5、onnect the AC Mains Lead to the AC Mains Socket of the VTR to the mains outlet. 4. If the TV set is equipped with separate video and audio input sockets, it is recommended to connect the VTR to the TV set with separate video and audio cables. ( ) Connection to a Stereo Amplifier 1. Connect the Audio
6、 Input Sockets on the VTR to the REC OUT Sockets on the Stereo Amplifier. 2. Connect the Audio Output Sockets on the VTR to the PLAYBACK Sockets on the Stereo Amplifier. . Tuning the TV Set to the Video Playback Channel ( ) Video Playback Channel Adjustor 1. Turn the TV set on and select the AV prog
7、ram position or another program position that is not occupied by another TV station. 2. Press the VTR ON/OFF Switch to turn the VTR on. The corresponding indicator lights up. 3. Set the Karaoke Switch to “1“ or “2“. 4. Tune the selected program position of the TV set to UHF approx, channel C25 ( PAL
8、 D) or E38 (PAL I/SECAM D. K. ). Confirm on your TV set that the blue screen appears. ( C25: China channel 25; E38: Europe standard channel 38) If UHF channel E38 (C25) is already occupied by a TV station in your area, the video playback channel can be changed between channel 32 to 40 (24 to 27) on
9、the back of the VTR by using a small screwdriver. 5. Set the Karaoke Switch to “NORMAL“. Your TV is now ready to receive the RF output signal from the VTR. 6. To check, playback a pre-recorded tape and confirm that the picture quality is satisfactory. ( ) RF Selector Use the RF Selector to select th
10、e color TV system used by the TV set to be connected. ( ) PAL/MESECAM Selector This selector should be set according to the color TV system used during recording and play back. When the MESECAM Indicator is lit, the MESECAM is selected. . The Video Cassette ( ) Inserting a Video Cassette 1. Insert t
11、he video cassette as shown. The VTR will be turned on automatically and the cassette will be automatically drawn into the VTR. 2. When a video cassette is inserted, the “ mark will appear. When a video cassette with broken erasure (擦除 ) prevention tab (for example a pre recorded tape) is inserted, p
12、layback will start immediately. Use the VHS video cassette tapes only. We recommend the “Panasonic Hi-Fi“ high grade video cassette tapes for improved picture and sound quality. ( ) Removing a Video Cassette Press the Eject (弹出 ) Button. Simply press the Eject button, the VTR turns itself on, ejects
13、 the cassette and turns itself off again. . Karaoke Playback ( ) Preparation 1. Make sure that the Timer Record Function is set to “OFF“. 2. Insert a Karaoke video cassette. 3. Turn the TV set on and select the video playback channel. 4. Set the Noise Filter/Edit Selector to “OFF“. 5. Connect a micr
14、ophone to the Microphone Socket on the VTR. 6. Set Karaoke Switch to “1“ or “2“. 7. Select a desired tune. ( ) Singing along with a video cassette 1. Press the Play Button to begin the playback. 2. Adjust the sound volume of the Microphone to the proper volume with the Microphone Mixing Level Contro
15、l while singing. If the volume is too high, the sound from the speaker may become distorted (扭曲 ). If acoustic (声音的 ) feedback occurs, turn the microphone volume down, use the microphone farther away from the speakers, hold the microphone so that it is not pointed toward the speakers, or turn the vo
16、lume of the TV set down. 3. Adjust the echo effect to your taste with the Echo Control while singing. It is possible to apply the echo effect to the sound from both Microphone 1 and 2 at the same time. 4. Press the Stop Button to stop the playback. . Making Karaoke Tapes ( ) Preparation 1. Make the
17、necessary connections as shown in the connection diagram. 2. Press the Input Signal Selector on the Remote Controller to select the “Al“ program position (or select with the Channel Up or Down Button on the VTR). 3. Set the VTR System Selector to “PAL/MESECAM“, “4.43“ or “3.58“ according to the colo
18、r TV system of the video source. 4. Connect the VTR to a TV set equipped with separate video and audio input sockets and using the same color TV system as the video source. ( ) Cautions for Making Karaoke Tapes When making Karaoke tapes, be sure to adhere to the following points. 1. Select the SP mo
19、de on the VTR for recording. 2. Make sure that the length of the intervals between tunes ( soundless parts) is more than 6 seconds. Make sure that the noise level of these parts is kept to an absolute minimum. 3. Record only tunes with a length of more than 40 seconds. 4. When making Karaoke tapes,
20、use the Pause/Still Button for editing. This minimizes noise at the points where successive recordings are joined. . Recording from a TV Broadcast Signal ( ) Preparation 1. Make sure that the Timer Record Function is set to “OFF“. 2. Insert a video cassette with tile erasure prevention tab intact. 3
21、. Set the Tape Speed Selector to “SP“ or “LP“. 4. Adjust the audio recording level as shown. ( ) Tape Speed Selector (SP/LP) For recording, either of two tape speeds can be selected. During playback, the VTR will automatically select the correct speed. SP Mode: For better picture quality. LP Mode: F
22、or longer recording time. The picture quality in the LP mode is not as good as that in the SP mode. ( ) Recording 1. Select on the VTR, the program position (channel) to be recorded. In order to confirm proper reception, turn on the TV set and select the video playback channel 2. Press the Record Bu
23、tton. 3. To finish the recording, press the Stop Button. Note: If the Karaoke Switch is not set to “NORMAL“, recording is not possible. Confirm that the VTR System Selector is set to “PAL/MESECAM“. 2 This passage is mainly about how to use a videotape recorder. ( A) Y ( B) N ( C) NG 3 We should alwa
24、ys connect the VTR to the TV set with the supplied DIN-DIN Coaxial Cable. ( A) Y ( B) N ( C) NG 4 It is unnecessary to turn on the VTR while tuning the TV set to the Video Playback Channel. ( A) Y ( B) N ( C) NG 5 When we are to remove a video cassette from a VTR, we should first turn on the VTR and
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
2000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 外语类 试卷 大学 英语四 模拟 538 答案 解析 DOC
