ASHRAE 135 1 ADD O-2014 Method of Test for Conformance to BACnet.pdf

《ASHRAE 135 1 ADD O-2014 Method of Test for Conformance to BACnet.pdf》由会员分享，可在线阅读，更多相关《ASHRAE 135 1 ADD O-2014 Method of Test for Conformance to BACnet.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、ANSI/ASHRAE Addendum o toANSI/ASHRAE Standard 135.1-2013Method of Test forConformance toBACnetApproved by ASHRAE on December 30, 2014, and by the American National Standards Institute on December 31, 2014.This addendum was approved by a Standing Standard Project Committee (SSPC) for which the Standa

2、rds Committee hasestablished a documented program for regular publication of addenda or revisions, including procedures for timely, docu-mented, consensus action on requests for change to any part of the standard. The change submittal form, instructions, anddeadlines may be obtained in electronic fo

3、rm from the ASHRAE website (www.ashrae.org) or in paper form from theSenior Manager of Standards. The latest edition of an ASHRAE Standard may be purchased on the ASHRAE website (www.ashrae.org) or from ASHRAECustomer Service, 1791 Tullie Circle, NE, Atlanta, GA 30329-2305. E-mail: ordersashrae.org.

4、 Fax: 678-539-2129. Tele-phone: 404-636-8400 (worldwide), or toll free 1-800-527-4723 (for orders in US and Canada). For reprint permission, goto www.ashrae.org/permissions. 2014 ASHRAE ISSN 1041-2336SPECIAL NOTEThis American National Standard (ANS) is a national voluntary consensus Standard develop

5、ed under the auspices of ASHRAE. Consensus is definedby the American National Standards Institute (ANSI), of which ASHRAE is a member and which has approved this Standard as an ANS, as“substantial agreement reached by directly and materially affected interest categories. This signifies the concurren

6、ce of more than a simple majority,but not necessarily unanimity. Consensus requires that all views and objections be considered, and that an effort be made toward their resolution.”Compliance with this Standard is voluntary until and unless a legal jurisdiction makes compliance mandatory through leg

7、islation. ASHRAE obtains consensus through participation of its national and international members, associated societies, and public review.ASHRAE Standards are prepared by a Project Committee appointed specifically for the purpose of writing the Standard. The ProjectCommittee Chair and Vice-Chair m

8、ust be members of ASHRAE; while other committee members may or may not be ASHRAE members, allmust be technically qualified in the subject area of the Standard. Every effort is made to balance the concerned interests on all Project Committees. The Senior Manager of Standards of ASHRAE should be conta

9、cted fora. interpretation of the contents of this Standard,b. participation in the next review of the Standard,c. offering constructive criticism for improving the Standard, ord. permission to reprint portions of the Standard.DISCLAIMERASHRAE uses its best efforts to promulgate Standards and Guideli

10、nes for the benefit of the public in light of available information and acceptedindustry practices. However, ASHRAE does not guarantee, certify, or assure the safety or performance of any products, components, or systemstested, installed, or operated in accordance with ASHRAEs Standards or Guideline

11、s or that any tests conducted under its Standards or Guidelineswill be nonhazardous or free from risk.ASHRAE INDUSTRIAL ADVERTISING POLICY ON STANDARDSASHRAE Standards and Guidelines are established to assist industry and the public by offering a uniform method of testing for rating purposes, bysugg

12、esting safe practices in designing and installing equipment, by providing proper definitions of this equipment, and by providing other informationthat may serve to guide the industry. The creation of ASHRAE Standards and Guidelines is determined by the need for them, and conformanceto them is comple

13、tely voluntary.In referring to this Standard or Guideline and in marking of equipment and in advertising, no claim shall be made, either stated or implied,that the product has been approved by ASHRAE.ASHRAE STANDARDS COMMITTEE 20142015Richard L. Hall, Chair James W. Earley, Jr. Mark P. ModeraDouglas

14、s T. Reindl, Vice-Chair Steven J. Emmerich Cyrus H. NasseriJoseph R. Anderson Patricia T. Graef Heather L. PlattJames Dale Aswegan Rita M. Harrold Peter SimmondsCharles S. Barnaby Adam W. Hinge Wayne H. Stoppelmoor, Jr.Donald M. Brundage Srinivas Katipamula Jack H. ZarourJohn A. Clark Debra H. Kenno

15、y Julia A. Keen, BOD ExOWaller S. Clements Malcolm D. Knight Bjarne Wilkens Olesen, CODavid R. Conover Rick A. LarsonJohn F. Dunlap Arsen K. MelkovStephanie C. Reiniche, Senior Manager of StandardsASHRAE Standing Standard Project Committee 135Cognizant TC: TC 1.4, Control Theory and ApplicationSPLS

16、Liaison: Mark P. ModeraCarl Neilson, Chair* Stuart G. Donaldson* Gregory Spiro*Bernhard Isler, Vice-Chair David G. Holmberg* David B. Thompson*Michael Osborne, Secretary* Daniel Kollodge* Grant N. Wichenko*Coleman L. Brumley, Jr.* Thomas Kurowski*Clifford H. Copass* Michael Newman*Donald P. Alexande

17、r John J. Lynch Ted SunderlandChandrashekhar Appanna Brian Meyers William O. Swan, IIIBarry B. Bridges Duffy OCraven Stephen J. TreadoSharon E. Dinges Dana Petersen Klaus WagnerStephen T. Karg Suresh Ramachandran J. Michael WhitcombSimon Lemaire Frank Schubert Christoph ZellerDamian Ljungquist Grego

18、ry M. Spiro Scott Ziegenfus* Denotes members of voting status when the document was approved for publicationThis foreword and the “rationales” on the following pages are not part of this standard. They are merely informative and do not contain requirements necessary for conformance to the standard.

19、FOREWORD This addendum includes the result of changes made pursuant to the ASHRAE continuous maintenance procedures and of deliberations within Standing Standard Project Committee 135. The proposed changes are summarized below. 135.1-2013o-1. Align SubscribeCOVProperty error codes with SubscribeCOV,

20、 p. 1 In the following document, language to be added to existing clauses of ANSI/ASHRAE 135.1-2013 and Addenda is indicated through the use of italics, while deletions are indicated by strikethrough. Where entirely new subclauses are proposed to be added, plain type is used throughout. 135.1-2013o-

21、1. Align SubscribeCOVProperty error codes with SubscribeCOV. Rationale Error situations were identified for SubscribeCOV in Addendum 135-2008h, but not for SubscribeCOVProperty. The error codes were since aligned in Addendum 135-2012ar and this proposal changes the tests to match. Change Clause 9.11

22、.2.1, p 301 9.11.2.1 The Monitored Object Does Not Support COV Notification Purpose: To verify that the IUT correctly responds to a SubscribeCOVProperty request to establish a subscription when the monitored object does not support COV notifications. Test Steps: 1. TRANSMIT SubscribeCOVProperty-Requ

23、est, Subscriber Process Identifier = (any valid process identifier), Monitored Object Identifier = (any object that does not support COV notifications), Issue Confirmed Notifications = TRUE, Lifetime = 60, Monitored Property Identifier = (any property in the object) 2. RECEIVE BACnet-Error PDU, Erro

24、r Class = SERVICES, Error Code = SERVICE_REQUEST_DENIED | OTHER 2. IF (Protocol_Revision 15) THEN RECEIVE ( BACnet-Error PDU, Error Class = SERVICES, Error Code = SERVICE_REQUEST_DENIED | OTHER ) | ( BACnet-Error PDU, Error Class = OBJECT Error Code = OPTIONAL_FUNCTIONALITY_NOT_SUPPORTED ) ELSE RECE

25、IVE BACnet-Error PDU, Error Class = OBJECT Error Code = OPTIONAL_FUNCTIONALITY_NOT_SUPPORTED Change Clause 9.11.2.2, p 301 9.11.2.2 The Monitored Property Does Not Support COV Notification Purpose: To verify that the IUT correctly responds to a SubscribeCOVProperty request to establish a subscriptio

26、n when the monitored object supports COV notifications but not on the requested property. Test Steps: 1. TRANSMIT SubscribeCOVProperty-Request, Subscriber Process Identifier = (any valid process identifier), Monitored Object Identifier = (any object that supports COV notifications), Issue Confirmed

27、Notifications = TRUE, Lifetime = 60, Monitored Property Identifier = (any property of the chosen object that does not support COV notifications) 2. RECEIVE BACnet-Error PDU, Error Class = SERVICES, Error Code = SERVICE_REQUEST_DENIED | OTHER 2. IF (Protocol_Revision 15) THEN RECEIVE ( BACnet-Error P

28、DU, Error Class = SERVICES, Error Code = SERVICE_REQUEST_DENIED | OTHER ) | ( BACnet-Error PDU, Error Class = PROPERTY Error Code = NOT_COV_PROPERTY ) ELSE RECEIVE BACnet-Error PDU, Error Class = PROPERTY Error Code = NOT_COV_PROPERTY POLICY STATEMENT DEFINING ASHRAES CONCERNFOR THE ENVIRONMENTAL IM

29、PACT OF ITS ACTIVITIESASHRAE is concerned with the impact of its members activities on both the indoor and outdoor environment.ASHRAEs members will strive to minimize any possible deleterious effect on the indoor and outdoor environment ofthe systems and components in their responsibility while maxi

30、mizing the beneficial effects these systems provide,consistent with accepted Standards and the practical state of the art.ASHRAEs short-range goal is to ensure that the systems and components within its scope do not impact theindoor and outdoor environment to a greater extent than specified by the S

31、tandards and Guidelines as established byitself and other responsible bodies.As an ongoing goal, ASHRAE will, through its Standards Committee and extensive Technical Committee structure,continue to generate up-to-date Standards and Guidelines where appropriate and adopt, recommend, and promotethose

32、new and revised Standards developed by other responsible organizations.Through its Handbook, appropriate chapters will contain up-to-date Standards and design considerations as thematerial is systematically revised.ASHRAE will take the lead with respect to dissemination of environmental information

33、of its primary interest andwill seek out and disseminate information from other responsible organizations that is pertinent, as guides to updatingStandards and Guidelines.The effects of the design and selection of equipment and systems will be considered within the scope of thesystems intended use a

34、nd expected misuse. The disposal of hazardous materials, if any, will also be considered.ASHRAEs primary concern for environmental impact will be at the site where equipment within ASHRAEs scopeoperates. However, energy source selection and the possible environmental impact due to the energy source

35、andenergy transportation will be considered where possible. Recommendations concerning energy source selectionshould be made by its members.ASHRAE 1791 Tullie Circle NE Atlanta, GA 30329 www.ashrae.org 1/15About ASHRAEASHRAE, founded in 1894, is a global society advancing human well-being through su

36、stainable technology for thebuilt environment. The Society and its members focus on building systems, energy efficiency, indoor air quality,refrigeration, and sustainability. Through research, Standards writing, publishing, certification and continuingeducation, ASHRAE shapes tomorrows built environ

37、ment today. For more information or to become a member of ASHRAE, visit www.ashrae.org.To stay current with this and other ASHRAE Standards and Guidelines, visit www.ashrae.org/standards.Visit the ASHRAE BookstoreASHRAE offers its Standards and Guidelines in print, as immediately downloadable PDFs,

38、on CD-ROM, and viaASHRAE Digital Collections, which provides online access with automatic updates as well as historical versions ofpublications. Selected Standards and Guidelines are also offered in redline versions that indicate the changes madebetween the active Standard or Guideline and its previ

39、ous version. For more information, visit the Standards andGuidelines section of the ASHRAE Bookstore at www.ashrae.org/bookstore.IMPORTANT NOTICES ABOUT THIS STANDARDTo ensure that you have all of the approved addenda, errata, and interpretations for thisStandard, visit www.ashrae.org/standards to download them free of charge.Addenda, errata, and interpretations for ASHRAE Standards and Guidelines are nolonger distributed with copies of the Standards and Guidelines. ASHRAE providesthese addenda, errata, and interpretations only in electronic form to promotemore sustainable use of resources.