ARMY MIL-P-48166-1973 PRIMER PERCUSSION M98 PARTS FOR AND LOADING ASSEMBLING AND PACKING《M98式撞击引物零件及其装药 组装和包装》.pdf

《ARMY MIL-P-48166-1973 PRIMER PERCUSSION M98 PARTS FOR AND LOADING ASSEMBLING AND PACKING《M98式撞击引物零件及其装药 组装和包装》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-P-48166-1973 PRIMER PERCUSSION M98 PARTS FOR AND LOADING ASSEMBLING AND PACKING《M98式撞击引物零件及其装药 组装和包装》.pdf（17页珍藏版）》请在麦多课文档分享上搜索。

1、s-57-/7 MIL-P-48166 (MU) 5 March 1973 SUPERSEDING (See 6.8) MILITARY SPECIFICATION - PRIMER, PERCUSSION: M98 PARTS FOR AND LOADING, ASSEMBLING AND PACKING 1, SCOPE 1.1 This specification covers the parts for and loading, assembling and packing for one type of primer designated as Primer, Percussion:

2、 M98. 2. APPLICABLE DOCUMENTS 2.1 The following documents of the issue in effect on date of invitation for bids or request for proposal, form a part of this specification to the extent specified herein: SPECIFICATIONS i MILITARY MIL-A-2550 - Ammunition and Special Weapons, General Specification for

3、Maintenance and Disposition of MIL-1-45607 - Inspection Equipment, Acquisition, STANDARDS MILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes (ABC-STD-10 5 ) MIL-STD-109 - Quality Assurance Terms and Definitions I FSC: 13901 Provided by IHSNot for ResaleNo reproduction

4、 or networking permitted without license from IHS-,-,-MIL-P-VLbb 13 m 779990b 031b1 T W MIL-P-48166 (MU) MIL-STD-286 * - Propellants, Solid: Sampling, Exam- MIL-STD-650 - Explosive: Sampling, Examination ination and Testing and Testing mL-STD-1168 - Lot Numbering of Ammunition I4IL-STD-12 35 - Singl

5、e and Multilevel Continu- ous Sampling Procedures and Tables for Inspection by Attributes DRAWINGS U.S. Army Munitions Commarid C-9211957 - Primer, Percussion: M98 F-9258182 C-9 25 8 18 3 C-92 5 8 18 4 - Box, Set-up Packing Anununition, - BOX, Set-UP Packing Ammunition, - box, Packing, Anununition,

6、For Small Inner For Small Explosive Components Outer For Small Explosive Components Explosive Components PUBLICATIONS ARMY ET-9211957 - Equipment Tabulation (Copies of specifications, standards, drawings and publications required by suppliers in connection with specific procurement functions should

7、be obtained from the procuring activity or as directed by the Contracting Officer). Other publications.-The following documents form a part of this specification to the extent specified herein. less otherwise indicated, the issue in effect on the date of invitation for bids or request for proposal s

8、hall apply. 2.2 Un- CODE OF FEDERAI; REGULATIONS Title 49 - Yransportation, Parts 0-190 (The Code of Federal Regulations is available from the Superin- tendent of Uocuments, U. S. Government Printing Office, Wash- ington, U. C. 20402 Orders snould specify, “49 CFR 0-190 (latest revision) =) 2 I Prov

9、ided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-481bb 13 = 777770b 031b882 L MIL-P-4 8166 (MU) 3. REQUIREMENTS 3.1 Material.-Materials shall be in accordance with the applicable drawings and specifications, 3.2 Primers.-The primers shall comply wit

10、h all requirements specified on Drawing (Dwg.) C-9211957, all associated drawings, and with all requirements specified in applicable specifications. 3.3 Moisture content of primer mixture.-The moisture content of the primer mixture at the time of loading shall not exceed 0.30 percent-when tested as

11、specified in 4.4.1. Functioning.-The primer shall explode under the impact of a ball weighing two (2) ounces, maximum (max.), falling a max distance of three and one-half (3.50) inches when tested as specified in 4.4.2. 3.4 3.5 Output.-The explosive output shall indent the lead disc for a depth of 0

12、.035 inch, minimum, when tested as specified in 4.4.2. 3.6 Workmanship.-All parts and assemblies shall be fabri- cated, loaded and assembled in a thorough, workmanlike manner. They shall be free of burrs, sharp edges, cracks, dirt, grease, rust, and other foreign matter. The cleaning method used sha

13、ll not be injurious to any part, nor shall the parts be contaminated by the cleaning agents. tinuous; however, a few light scratches not exposing base material may be permitted. All required marking and stamping shall be neat and sharply defined. Exterior surface coatings shall be con- 3.7 Submissio

14、n of results of contractor-conducted examin- ations and tests.-The contractor shall forward copies of the results of any of his examinations or tests to the designated address as required by the contract. (See 6.7). 3.8 First article testing.-This specification makes pro- visions for first article t

15、esting. quantity by the contractor shall be as specified in the contract. Submission of first article 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection.-Unlesss otherwise specified in the contract or purchase order, the supplier is responsible for the performance of all inspection re

16、quirements as specified herein. Except as otherwise specified in the 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-48166 (MU) 8 contract or order, the supplier may use his own or any other facilities suitable for the performance of the insp

17、ection requirements specified herein, unless disapproved by the Govern- ment. inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. Reference shall be made to MIL-STD-109 to define terms used herein.

18、 The provisions of MIL-A-2550 shall aPPlY The Government reserves the right to perform any of the 4.1.1 Submission of product.-At the time the completed lot of item deliverable under the contract is submitted to the Governnient for acceptance, the contractor shall supply the follow- ing information

19、accompanied by a certificate which attests that the information provided is correct and applicable to the product being submitted: a. 1. Drawing and Specification number and date, together with c. A statement that the lot complies with all the quality assurance provisions specified in this specifica

20、tion. identification and date of changes thereto. A statement that all material purchased by the contractor meets requirements, when such material is controlled by Government or commercial specifications referenced in any of the contractual documents, and that certificates of conformance are on file

21、 and available for review, with the exception that a statement of Findings on the Moisture Content of each explosive shall le furnished with each lot submitted for acceptance. d. Number of itenis in the lot. e. Date submitted. The certificate shall be signed by a responsible agent of the certifying

22、organization. The initial certificate submitted shall be substantiated by evidence of the agents authority to bind his principal. be required with subsequent certificates unless, during the course of the contract, this authority is vested in another agent of the certifying organization. Substantiati

23、on of the agents authority will not 4.2 First article inspection.- :* f . -. 4.2.1 Submission.-The contractor shall submit a first article quantity as designated by the Contracting Officer for evaluation in accordance with the provisions of 4.2.2. The first article sample shall consist of one-hundre

24、d and fifty (150) primers. (See 6.1) 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- - MIL-P-98Lbb 13 9799906 0336884 5 - C 4 1 MIL-P-48166 (MU) All parts and completed assemblies submitted shall have been produced by the contractor (or furnished

25、by a supplier) using the sanie production processes, procedures and equipnent as will be used in fulfilling the contract. materials, inciuding packaging and packing, shall be obtained from the came sources of supply as will be used in regular production. The sample shall be accompanied by certificat

26、es of conformance, A first article quantity, or portion thereof, as directed by the Contracting Officer, shall also be submitted whenever there is a lapse in production for a period in excess of 90 days, or whenever a change occurs in manufacturing process (including heat treatment procedures and eq

27、uipment) material used, drawing specification or source of supply as to significantly affect product uniformity as determined by the Governnient. Prior to submission, the contractor shall inspect the sample to the degree necessary to assure that it conforms to the requirements of the contract and su

28、bmit a record of this inspection with the sample. A sample containing known defects will not be submitted unless specifically authorized by the contracting Officer. All parts and 4.2.2 Inspection to be performed.-All primers shall be subjected by the Government to the examination specified in 4.3.2.

29、2. In addition, the following tests shall be performed: 4.2.2.1 Functioning (See 3.4) .-One-hundred (100) primers shall be subjected to this test. as specified in 4.4.2 using equipnient in accordance with 4.3.4. The test shall be performed 4.2.2.2 Output (See 3.5).-FiCty (50) primers shall be sub- j

30、ected to this test. in 4.4.2 using equipment in accordance with 4.3.4. The test shall be performed as specified 4.2.3 Rejection.-if any primer fails to comply with any of the applicable requirements, the first article quantity shall be rejected. The Government reserves the right to terminate its ins

31、pection upon any failure of any primer. In the event of rejection, the Governnient reserves the right to require the contractor to bk.e corrective action and submit a new first article quantity or portion thereof. Until a first article quantity is accepted, the contractor is in no way authorized by

32、the Government to resume regular production unless otherwise directed by the Contracting Officer. 4.3 Inspection provisions.- 4.3.1 Lot formation.-The term “inspection lot“ as used in this specification is defined as an essentially homogeneous collection of units of product from which a representati

33、ve sample t 5 c Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-L - . MIL-P-3bb 33 9779906 0336885 7 MIL-P-4 8166 (MU) is drawn and inspected to determine conformance with applicable requirements. The sample selected shall represent only that quantit

34、y of units from which the sample was drawn and shall not be construed to represent any prior or subsequent quantities presented for inspection. Homogeneity shall be considered to exist provided the inspection lot has been produced by one manufacturer, in one unchanged process, in accordance with the

35、 same drawing, same drawing revision, same specification and same specification revision, and complies with the provisions for submission of product as specified in MIL-STD-105. Changes to process, specification, or drawing not affecting safety, perform- ance, interchangeability, or storage, as dete

36、rmined by the Government, shall not be deemed to alter the homogeneity of an inspection lot. All material submitted for inspection in accor- dance with this specification shall comply with the homogeneity criteria specified herein regardless of the type of sampling procedure which is being applied t

37、o determine conformance with requirements. Lot numbering, as required, shall be in accordance with MIL-STD-1168. Each inspection lot shall contain: ! a. Parts of one lot interfix number from one manufacturer. b. Primer mixture from one batch or blending of batches C. Lead azide from one batch or ble

38、nding of batches which d. Lead styphnate from one batch or blending of batches, which results in homogeneity of all priming mixture used in loading the entire primer lot. results in homogeneity of all lead azide used in loading the entire primer lot. which results in homogeneity of all lead styphnat

39、e used in loading the entire primer lot. 4.3.2 Examination.-The examinations listed in the follow- ing subparagraphs shall be performed on inspection lots (See 4.3.1) of the components or assemblies designated in the applicable para- graph headings. Inspection for critical defects (and major defects

40、, when so specified) shall be 100 percent. Sampling plans for major and minor defects shall be in accordance with MIL-STD-105 except that continuous sampling plans in accordance with MIL-STD-1235 may be used if approved by the Government. Instead of applying the AQLs designated herein to the groups

41、of major and minor defects listed, the contractor may elect to apply AQLs to individual de- fects using an AQL of 0.40 percent for each major defect and an AQL of 0.65 percent for each minor defect. When this method is elected, it shall be applied to all of the major and minor defects listed in the

42、applicable subparagraph of this section, except where 100 percent inspection is specified, and be documented as part of the contractors inspection system. performance of the inspections listed shall be in accordance with 4.3.4. Equipment necessary for the 6 i B I Provided by IHSNot for ResaleNo repr

43、oduction or networking permitted without license from IHS-,-,-MIL-P-98Lbb 33 7797706 0336886 7 I 4.3.2.1 Primer (prior to loading) (See Dwg. C-9211957) .- Categories Defects Method of Defect Inspection Code (See 6.2) Critical: None defined Major : None defined Minor 201. Foreign matter (See 3.6) Vis

44、ual O1001 4.3.2.2 Primer (See Dwg. C-9211957). Categories Defects Method of Defect Inspection Code Critical 1. Explosive on exterior Visual 02001 tured, cut or torn) Visual 02002 2. Explosive exposed (Disc punc- 02003 3. Cup cut, split or cracked Visual 101. Weight of charge Balance 02004 102. Total

45、 length (prior to sealing) Gage 02005 103. Outside diameter, max. Gage 02006 O2007 104. Color improper at ends Visual Major AQL 0.65 Percent Minor AQL 2.50 Percent 201. Paint on ends not dry Manual 02008 202. Distortion Visual 02009 203. Disc wrinkled or folded Visual 02010 204. Crimp not a full 360

46、 degrees Visual 02011 205. Crack at crimp Visual 02012 206. Evidence of poor workmanship 02013 (See 3.6) Visual 4.3.2.3 slide cover) Box, Set-up, inner (after loading and prior to closing (See Dwg. F-9258182) .-. Categories Defects Method of Code Inspection Number Critical : 1. Cushion-filler assemb

47、ly missing Visual 03001 2. Stiffener missing from slide 03002 3. Primers improperly positioned Visual 03003 cover Visual 7 I I- - . . . . .- . 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I MIL-P-48166 (MU) s &!a j or : AQL 0.40 Percent 101. Rel

48、ease paper missing or improperly assembled Visual 03005 Minor AQL 1.00 Percent 201. Marking missing, incomplete 202. Evidence of poor workmanship 03006 or illegible Visual (See 3.6) Visual 03007 4.3.2.4 Box, Set-up, inner (afizer closing slide cover) (See Dwg. F-9258182). Categories Defects Method o

49、f Code Inspection Number Critical : 1. Slide cover assembled reversed Visual 04001 Major: None defined Minor: None defined 4.3.2.5 Box, Set-up, outer (with inner Set-up boxes assembled and prior to assembling top and sealing strip) Dwg. C-9258183). (See .I . i Categories Defects Method of Code Critical : Inspection Number 1, Red surfaces on inner Set-up boxes do not alternate on same side of outer Set-up box Black surfaces on inner S