ARMY MIL-DTL-3943 158 B-2010 DECORATION SILVER AWARD DEPARTMENT OF COMMERCE《奖章 商务部银奖》.pdf

《ARMY MIL-DTL-3943 158 B-2010 DECORATION SILVER AWARD DEPARTMENT OF COMMERCE《奖章 商务部银奖》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-DTL-3943 158 B-2010 DECORATION SILVER AWARD DEPARTMENT OF COMMERCE《奖章 商务部银奖》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET DECORATION, SILVER AWARD, DEPARTMENT OF COMMERCE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specificati

2、on sheet and the latest issue of MIL-DTL-3943. DASH NO. -1: Regular Size -2: Miniature Size MATERIAL: Red Brass FINISH: Nickel Plated, Silver Plated, Oxidized, Buffed Relieved, Matte Finish and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 14. DIMENSIONS: HEIGHT (including lu

3、g): -1: 1-9/16 inches (REF) -2: 9/16 inch (REF) INCH-POUND MIL-DTL-3943/158B 19 March 2010 SUPERSEDING MIL-DTL-3943/158A 1 May 1997 OBVERSE Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/158B Page 2 of 2 DIAMETER: -1: 1-3/8 inches (REF)

4、 -2: 1/2 inch (REF) THICKNESS (at edge): -1: 0.115 inch + 0.005 inch -2: 0.085 inch + 0.005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The back of the pendant shall be flat except for the lug. 3. Decoration set shall consist of a regul

5、ar size medal and a service ribbon all packaged in a presentation case conforming to MIL-C-14633, Type XVI with a Type XVI, Class 1 or 3 pad. 4. The ribbon for the pendant drape and service ribbon shall conform to MIL-DTL-11589/308. 5. This item is not authorized for commercial sale, and may be prod

6、uced only under Government contract. A copy of the original purchase order from the Government Agency concerned must accompany all written requests prior to the loan of a Government hub or die. CHANGES FROM PREVIOUS ISSUE: The margins of this specification are marked with vertical lines to indicate

7、where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespectiv

8、e of the marginal notations and relationship to the last previous issue. Custodians: Preparing activity: Army - IH Army - IH Review activities: (Project No. 8455-2010-082) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-