AIR FORCE MIL-C-83019 (3)-1995 COATING POLYURETHANE FOR PROTECTION OF INTEGRAL FUEL TANK SEALING COMPOUND《整体油箱密封复合剂保护用聚氨酯涂料》.pdf
《AIR FORCE MIL-C-83019 (3)-1995 COATING POLYURETHANE FOR PROTECTION OF INTEGRAL FUEL TANK SEALING COMPOUND《整体油箱密封复合剂保护用聚氨酯涂料》.pdf》由会员分享,可在线阅读,更多相关《AIR FORCE MIL-C-83019 (3)-1995 COATING POLYURETHANE FOR PROTECTION OF INTEGRAL FUEL TANK SEALING COMPOUND《整体油箱密封复合剂保护用聚氨酯涂料》.pdf(3页珍藏版)》请在麦多课文档分享上搜索。
1、INCHPOUNDMILC83019(USAF)AMENDMENT 313 January 1995 SUPERSEDINGAMENDMENT 220 OCTOBER 1972MILITARY SPECIFICATIONCOATING, POLYURETHANE, FOR PROTECTION OF INTEGRAL FUEL TANK SEALING COMPOUNDThis amendment forms a part of MILC83019(USAF) dated 4 November 1968, and is approved for useby the Department of
2、Air Force and is available for use by all Departments and Agencies of theDepartment of Defense.PAGE 1*Last line: Delete: “MILS7502 Sealing Compound, Integral Fuel Tanks and Required Cell Cavities, High Adhesion, Accelerator”PAGE 2*Line 8 and 9: Delete: “MILC38736(USAF) Cleaning Compound, Solvent, fo
3、r Use in Integral Fuel Tanks”*Under Military: Delete: “MILSTD105 Sampling Procedures and Tables for Inspection by AttributesUSAF Bulletin Free Diisocyanate Test Method No. 535”*2.2: Add: “SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)AMS 2629 Fluid, Jet ReferenceAMS 3166 Solvents, Cleaning, for Cleaning Prio
4、r to Application of Sealing Compounds(Application for copies should be addressed to the Society of Automotive Engineers, Inc., 400Commonwealth Drive, Warrendale, PA 15096.)”DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimitedAMSC N/A 1 of 3 FSC 80307Provided by IHSNot for
5、 ResaleNo reproduction or networking permitted without license from IHS-,-,-MILC83019(USAF)AMENDMENT 3 2PAGE 33.2.1: Add: “Material meeting this specification is normally clear. There are instances, however, when acolored material is desired. The use of colored material is permissible providing all
6、requirements of thisspecification are met. Materials containing a blue dye and a red dye are available”Table I: Under Viscosity requirement: Delete “15 to 20 seconds” and substitute “15 to 25 seconds”,Under Application Life requirement: Delete “30 seconds, Maximum” and substitute “40 seconds,Maximum
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
2000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- AIRFORCEMILC8301931995COATINGPOLYURETHANEFORPROTECTIONOFINTEGRALFUELTANKSEALINGCOMPOUND 整体 油箱 密封 复合 保护

链接地址:http://www.mydoc123.com/p-427628.html