ISO 5344 AMD 1-2016 Electrodynamic vibration generating systems - Performance characteristics Amendment 1《电动振动发生系统 性能特性 修改件1》.pdf

《ISO 5344 AMD 1-2016 Electrodynamic vibration generating systems - Performance characteristics Amendment 1《电动振动发生系统 性能特性 修改件1》.pdf》由会员分享，可在线阅读，更多相关《ISO 5344 AMD 1-2016 Electrodynamic vibration generating systems - Performance characteristics Amendment 1《电动振动发生系统 性能特性 修改件1》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、 ISO 2016 Electrodynamic vibration generating systems Performance characteristics AMENDMENT 1 Systmes lectrodynamiques utiliss pour la gnration de vibrations Caractristiques de performance AMENDEMENT 1 INTERNATIONAL STANDARD ISO 5344 Second edition 2004-07-01 Reference number ISO 5344:2004/Amd.1:201

2、6(E) AMENDMENT 1 2016-12-01 ISO 5344:2004/Amd.1:2016(E)ii ISO 2016 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, ele

3、ctronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Ve

4、rnier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO 5344:2004/Amd.1:2016(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Internati

5、onal Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with IS

6、O, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Pa

7、rt 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the

8、 elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations re

9、ceived (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformit y assessment, as well as information about ISO

10、s adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html. The committee responsible for this document is ISO/TC 108, Mechanical vibration, shock and condition monitoring, Subcommittee SC 6, Vibration an

11、d shock generating systems. ISO 2016 All rights reserved iii Electrodynamic vibration generating systems Performance characteristics AMENDMENT 1 Page 26, A.10 Replace the whole subclause with the following: A.10 Transverse motion of the test table Transverse motion ratio, T, is measured at the load

12、fixing locations on an unloaded table as a function of frequency as follows: wherea x(t), a y(t) are accelerations along two arbitrary orthogonal axes in the plane perpendicular to the operating axis z;A z is the specified amplitude of the sine acceleration along the operating axis z. ISO 5344:2004/Amd.1:2016(E) ISO 2016 All rights reserved 1 ISO 5344:2004/Amd.1:2016(E) ISO 2016 All rights reserved IC S 17.160 Price based on 1 page