ISO 10307-2 CORR 1-2010 Petroleum products - Total sediment in residual fuel oils - Part 2 Determination using standard procedures for ageing Technical Corrigen.pdf

《ISO 10307-2 CORR 1-2010 Petroleum products - Total sediment in residual fuel oils - Part 2 Determination using standard procedures for ageing Technical Corrigen.pdf》由会员分享，可在线阅读，更多相关《ISO 10307-2 CORR 1-2010 Petroleum products - Total sediment in residual fuel oils - Part 2 Determination using standard procedures for ageing Technical Corrigen.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 75.160.20 Ref. No. ISO 10307-2:2009/Cor.1:2010(E) ISO 2010 All rights reserved Published in Switzerland INTERNATIONAL STANDARD ISO 10307-2:2009 TECHNICAL CORRIGENDUM 1 Published 2010-05-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATIONPetroleum produc

2、ts Total sediment in residual fuel oils Part 2: Determination using standard procedures for ageing TECHNICAL CORRIGENDUM 1 Produits ptroliers Insolubles existants dans les fuel-oils rsiduels Partie 2: Dtermination laide de mthodes de vieillissement de rfrence RECTIFICATIF TECHNIQUE 1 Technical Corri

3、gendum 1 to ISO 10307-2:2009 was prepared by Technical Committee ISO/TC 28, Petroleum products and lubricants. Page 5, 9.1 In the last paragraph of the subclause, correct the value of the result to be recorded from “0,005 % (m/m)” to “0,00 % (m/m)”, so that the sentence reads: For each test specimen with a total sediment concentration u 0,005 % (m/m), record the result as 0,00 % (m/m).