IEEE C37 122 6-2013 en Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated Substations Rated above 52 kV《额定电压52 kV气体.pdf

《IEEE C37 122 6-2013 en Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated Substations Rated above 52 kV《额定电压52 kV气体.pdf》由会员分享，可在线阅读，更多相关《IEEE C37 122 6-2013 en Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated Substations Rated above 52 kV《额定电压52 kV气体.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、 IEEE Std C37.122.6TM-2013 (Revision of IEEE Std 1416TM-1998) IEEE Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated Substations Rated above 52 kV Sponsor Substations Committee of the IEEE Power and Energy Society Approved 11 December 2013 IEEE-SA Standa

2、rds Board Abstract: Recommendations for the connection of gas-insulated substation to another gas-insulated substation of a different make or design are given. IEEE Std 1416TMis replaced by this recommended practice. Keywords: extension, gas-insulated substation (GIS), gas-insulated transmission lin

3、e (GIL), interface, IEEE C37.122.6TM, IEEE 1416TMThe Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2014 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 31 January 2014. Printed in the United

4、 States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE

5、 standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEE

6、E standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or

7、 rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of re

8、asonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NO

9、T LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR

10、RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the Englis

11、h version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its

12、committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that ind

13、ividual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards

14、 documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurr

15、ence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not r

16、espond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 U

17、SA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing

18、or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE

19、 under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering pract

20、ices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy

21、 portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to pho

22、tocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editi

23、ons or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to re

24、view at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they ha

25、ve the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the

26、 address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findst

27、ds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with

28、 respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents

29、.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain s

30、uch licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining

31、whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk o

32、f infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. vi Copyright 2014 IEEE. All rights reserved. Participants At the time this recommended practice was completed, the K9 Working Group had the following membersh

33、ip: Arnaud Ficheux, Chair Peter Grossmann, Vice Chair Arun Arora Hassein Bashirian George Becker John Boggess Phil Bolin Edward Crocket Ravi Dhara Markus Etter Patrick Fitzgerald Noboru Fujimoto Dave Giegel Charles L. Hand Hermann Koch David Lin Hua Y. Liu Jorge Marquez James Massura Pravakar Samant

34、a Steven Scharf Devki Sharma David Solhtalab Ryan Stone Ronald Wampole Brian Withers Xi Zhu The following members of the individual balloting committee voted on this recommended practice. Balloters may have voted for approval, disapproval, or abstention. Satish Aggarwal Saleman Alibhay Ficheux Arnau

35、d Arun Arora George Becker W. J. (Bill) Bergman Wallace Binder Gustavo Brunello Paul Cardinal Robert Christman Gary Donner Denis Dufournet Edgar Dullni Markus Etter Jorge Fernandez Daher Patrick Fitzgerald Rabiz Foda Rostyslaw Fostiak Doaa Galal Frank Gerleve David Giegel Mietek Glinkowski James Gra

36、ham Randall Groves Charles L. Hand David Harris Gary Heuston Werner Hoelzl Andrew Jones Laszlo Kadar Yuri Khersonsky Hermann Koch Joseph L. Koepfinger Jim Kulchisky Chung-Yiu Lam Benjamin Lanz Hua Y. Liu Jorge Marquez Omar Mazzoni Venkatesh Minisandram David Mitchell Georges Montillet Michael Newman

37、 Ted Olsen Lorraine Padden Bansi Patel Darin Penner Michael Roberts Oleg Roizman Jesse Rorabaugh Bartien Sayogo Devki Sharma James Smith Phillip Smitherman David Solhtalab John Spare Gary Stoedter Ryan Stone John Vergis Jane Verner Mark Waldron Kenneth White James Wilson Brian Withers Xi Zhu vii Cop

38、yright 2014 IEEE. All rights reserved. When the IEEE-SA Standards Board approved this recommended practice on 11 December 2013, it had the following membership: John Kulick, Chair David J. Law, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Peter Balma

39、 Farooq Bari Ted Burse Stephen Dukes Jean-Philippe Faure Alexander Gelman Mark Halpin Gary Hoffman Paul Houz Jim Hughes Michael Janezic Joseph L. Koepfinger* Oleg Logvinov Ron Petersen Gary Robinson Jon Walter Rosdahl Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Yu Yuan *Member Emerit

40、us Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Don Messina IEEE Standards Program Manager, Document Development Erin Spiewak IEEE Client Services Manager, Professional Services vii Copyright 201

41、4 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std C37.122.6-2013, IEEE Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated Substations Rated above 52 kV. Gas-insulated substations (GIS) are proven technologies covered by i

42、nternational standards and guides. But so far, very little guidance has been made available to utilities when they have to connect a GIS to a GIS of another make or design. This document defines a recommended practice to cover such a case. This document is a revision and replaces IEEE Std 1416-1998,

43、 reaffirmed in 2004. viii Copyright 2014 IEEE. All rights reserved. Contents 1. Scope 1 2. Normative references 1 3. Definitions 2 4. General . 2 5. Specific requirements during initial stage of GIS project . 3 5.1 General 3 5.2 Grounding consideration for GIS extension 3 5.3 Service continuity 4 6.

44、 Specific requirements during extension GIS project 4 6.1 General 4 6.2 Preparation work 5 6.3 Design work . 5 6.4 Manufacturing stage 6 6.5 Site work 6 6.6 Outage conditions 6 6.6.1 General . 6 6.6.2 Outage conditions during installation 7 6.6.3 Outage conditions during site testing . 9 7. Recommen

45、ded practice for GIS interface . 13 7.1 General 13 7.2 GIS interface for extensions anticipated from initial stage 13 7.3 Case of extensions not anticipated from initial stage . 13 8. Responsibility . 14 Annex A (informative) Standard GIS interface for extensions anticipated from initial stage 15 An

46、nex B (informative) GIS interface for extensions not anticipated from initial stage . 19 Annex C (informative) Bibliography 22 1 Copyright 2014 IEEE. All rights reserved. IEEE Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated Substations Rated above 52 k

47、V IMPORTANT NOTICE: IEEE Standards documents are not intended to ensure safety, security, health, or environmental protection, or ensure against interference with or from other devices or networks. Implementers of IEEE Standards documents are responsible for determining and complying with all approp

48、riate safety, security, environmental, health, and interference protection practices and all applicable laws and regulations. This IEEE document is made available for use subject to important notices and legal disclaimers. These notices and disclaimers appear in all publications containing this docu

49、ment and may be found under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html. 1. Scope This document gives the recommended practices for designing and installing the interfaces between existing gas-insulated substation (GIS) equipment and new GIS equipment that is added at a later date and may be of different design and of different manufacturer. The recommended practices apply for GIS rated above 52 kV. They also include