IEC 61156-2-1-2010 Multicore and symmetrical pair quad cables for digital communications - Part 2-1 Horizontal floor wiring - Blank detail specification《数字通信用对绞或星绞多芯对称电缆.第2-1部分 水平楼板布线.空白详细规范》.pdf

《IEC 61156-2-1-2010 Multicore and symmetrical pair quad cables for digital communications - Part 2-1 Horizontal floor wiring - Blank detail specification《数字通信用对绞或星绞多芯对称电缆.第2-1部分 水平楼板布线.空白详细规范》.pdf》由会员分享，可在线阅读，更多相关《IEC 61156-2-1-2010 Multicore and symmetrical pair quad cables for digital communications - Part 2-1 Horizontal floor wiring - Blank detail specification《数字通信用对绞或星绞多芯对称电缆.第2-1部分 水平楼板布线.空白详细规范》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 61156-2-1 Edition 3.0 2010-06 INTERNATIONAL STANDARD Multicore and symmetrical pair/quad cables for digital communications Part 2-1: Horizontal floor wiring Blank detail specification IEC 61156-2-1:2010(E) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All right

2、s reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the request

3、er. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: i

4、nmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publicatio

5、ns is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text

6、, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email

7、. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Cus

8、tomer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61156-2-1 Edition 3.0 2010-06 INTERNAT

9、IONAL STANDARD Multicore and symmetrical pair/quad cables for digital communications Part 2-1: Horizontal floor wiring Blank detail specification INTERNATIONAL ELECTROTECHNICAL COMMISSION M ICS 33.120.20 PRICE CODE ISBN 978-2-88912-039-0 Registered trademark of the International Electrotechnical Com

10、mission 2 61156-2-1 IEC:2010(E) CONTENTS FOREWORD.3 1 Scope.5 2 Normative references5 3 Guidance for preparation of detail specifications .5 4 Blank detail specification for multicore and symmetrical pair/quad cables for digital communication in horizontal floor wiring7 Bibliography12 61156-2-1 IEC:

11、2010(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS Part 2-1: Horizontal floor wiring Blank detail specification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization com

12、prising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Sta

13、ndards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this pre

14、paratory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two orga

15、nizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form

16、 of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretat

17、ion by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or reg

18、ional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out

19、 by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees

20、 for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the

21、Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held r

22、esponsible for identifying any or all such patent rights. International Standard IEC 61156-2-1 has been prepared by subcommittee 46C: Wires and symmetric cables, of IEC technical committee 46: Cables, wires, waveguides, r.f. connectors, r.f. and microwave passive components and accessories. This thi

23、rd edition cancels and replaces the second edition published in 2003. This edition constitutes a technical revision and takes into account the technical changes made in the IEC 61156-2, Edition 3 (2010). This sectional specification relates to IEC 61156-2:2010. The cables are specifically intended f

24、or horizontal floor wiring as defined in ISO/IEC 11801:1995. 4 61156-2-1 IEC:2010(E) The text of this technical report is based on the following documents: CDV Report on voting 46C/900/CDV 46C/913/RVC Full information on the voting for the approval of this technical report can be found in the report

25、 on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61156 series, under the general title: Multicore and symmetrical pair/quad cables for digital communications, can be found on the IEC website.

26、The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revi

27、sed edition, or amended. A bilingual version of this publication may be issued at a later date. 61156-2-1 IEC:2010(E) 5 MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS Part 2-1: Horizontal floor wiring Blank detail specification 1 Scope This blank detail specification relates t

28、o multicore and symmetrical pair/quad cables for digital communications in horizontal floor wiring. This blank detail specification determines the layout and style for detail specifications describing multicore and symmetrical pair/quad cables for digital communication in horizontal floor wiring. De

29、tail specifications based on the blank detail specification may be prepared by a national standards organization, a manufacturer or a user. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited a

30、pplies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61156-1:2002 1) , Multicore and symmetrical pair/quad cables for digital communications Part 1: Generic specification IEC 61156-2:2010, Multicore and symmetrical pair/quad cables for

31、 digital communications Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz Horizontal floor wiring Sectional specification 3 Guidance for preparation of detail specifications It is necessary to keep the transmission characteristics indicated in the relevant sectiona

32、l specification for the category number (3 or 5) and the characteristic impedance. NOTE When a characteristic does not apply, then NA (for Not Applicable) may be entered in the appropriate space. When a characteristic applies but a specific value is not considered necessary, then NS (for Not Specifi

33、ed) should be entered in the appropriate space. _ 1)A more recent version of this standard exists (2007), but as not all of the tests cited herein are addressed by the newer edition, it has been decided that the 2002 edition is to be used. 6 61156-2-1 IEC:2010(E) The numbers shown in brackets in thi

34、s and the following pages correspond to the following items of required information which shall be entered in the spaces provided. 1 Name and address of the organization that has prepared the document. 2 IEC document number, issue number and date of issue. 3 Address of the organization from which th

35、e document is available. 4 Related documents. 5 Any other reference to the cable, national reference, trade name, etc. 6 A complete description of the cable: a) type and number of elements; b) nominal impedance; c) screening; d) application; e) category; f) other distinguishing performance character

36、istics. Example: Detail specification for 4-pairs cable without common screen for digital communications in horizontal floor wiring category 5. 7 Details of the cable materials and construction. 8 Special requirements for bending radius or operation temperatures. 9 List of cable characteristics. The

37、y are separated into electrical, transmission, mechanical and environmental characteristics. 10 Appropriate subclause references in the sectional specification IEC 61156-2. 11 Requirements applicable for this cable. The values entered shall at a minimum meet the requirements of sectional specificati

38、on IEC 61156-2. 12 Relevant remarks. 61156-2-1 IEC:2010(E) 7 4 Blank detail specification for multicore and symmetrical pair/quad cables for digital communication in horizontal floor wiring 1 Prepared by: 2 Document: Issue: Date: 3 Available from: 4 Generic specification: IEC 61156-1:2002 Sectional

39、specification: IEC 61156-2 Blank detail specification: IEC 61156-2-1 5 Additional references: 6 Cable description: IEC 61156-2 subclause Characteristic comment 7 Cable materials and construction 2.2.2 Cable construction 2.2.3 Conductor description 2.2.4 Insulation description: Nominal thickness Maxi

40、mum diameter 2.2.5 Colour code of insulation 2.2.6 Number and type of elements 2.2.7 Screening of the element 2.2.8 Cable make-up Protective wrapping(s) of the cable core: 2.2.9 Screen of the cable core: Tape material Minimum overlap Drain wire Braid wire Braid material Filling factor 8 61156-2-1 IE

41、C:2010(E) 2.2.10 Sheath: Material Nominal thickness Maximum overall diameter Marking Rip cord 2.2.11 Colour of the sheath 2.2.12 Identification 2.2.13 Packaging of finished cable 61156-2-1 IEC:2010(E) 9 9 Characteristics 10 Subclause 11 Requirements 12 Comments Electrical characteristics 3.2 Conduct

42、or resistance 3.2.1 /km Resistance unbalance 3.2.2 % Dielectric strength 3.2.3 conductor/conductor kV conductor/screen screen/screen kV kV Insulation resistance 3.2.4 conductor/conductor Mkm conductor/screen screen/screen Mkm Mkm Mutual capacitance 3.2.5 NS Capacitance unbalance 3.2.6 pair to ground

43、 pF/500 m Transfer impedance at 1 MHz 10 MHz 30 MHz 100 MHz 3.2.7 m/m m/m m/m m/m Transmission characteristics 3.3 Velocity of propagation (phase velocity) 3.3.1 NS Phase delay 3.3.1.1 NS for Cat 3 Differential phase delay 3.3.1.2 NS for Cat 3 Environmental effects in the temperature range from 40 C

44、 to +60 C 3.3.1.2.1 Attenuation at 1 MHz 3.3.2 . dB/100 m Equation (1) 4 MHz . dB/100 m 10 MHz . dB/100 m 16 MHz . dB/100 m 20 MHz . dB/100 m 31,25 MHz . dB/100 m 62,5 MHz . dB/100 m 100 MHz . dB/100 m Unbalance attenuation near-end (TCL) 3.3.3 NS 10 61156-2-1 IEC:2010(E) 9 Characteristics 10 Subcla

45、use 11 Requirements 12 Comments Unbalance attenuation far-end (EL-TCTL) 3.3.3 NS Near-end crosstalk at 1 MHz 3.3.4 dB Equation (2) 4 MHz dB 10 MHz dB 16 MHz dB 20 MHz dB 31,25 MHz dB 62,5 MHz dB 100 MHz dB Characteristic impedance Input impedance 1 MHz / MHz Function fitted impedance / mean characte

46、ristic impedance 3.3.6 3.3.6.2 3.3.6.3 . 15 . Structural return loss (SRL) 3.3.7 . dB Mechanical characteristics 3.4 Dimensional requirements Insulation diameter Sheath thickness Cable diameter 3.4.1 . mm Elongation at break of the conductors 3.4.2 % Elongation at break of the insulation 3.4.3 % Elo

47、ngation at break of the sheath 3.4.4 % Tensile strength of the sheath 3.4.5 MPa Crush test of the cable 3.4.6 Impact test of the cable 3.4.7 Repeated bending of the cable 3.4.8 Tensile performance of the cable 3.4.9 N 61156-2-1 IEC:2010(E) 11 9 Characteristics 10 Subclause 11 Requirements 12 Comment

48、s Environmental characteristics 3.5 Shrinkage of insulation 3.5.1 % Wrapping test of insulation after thermal ageing 3.5.2 Bending test of insulation at low temperature 3.5.3 Elongation at break of the sheath after ageing 3.5.4 % Initial value Tensile strength of the sheath after ageing 3.5.5 % Initial value Sheath pressure test at high temperature 3.5.6 Cold bend test of the cable 3.5.7 Heat shock test 3.5.8 Flame propagation characteristics of a single cable 3.5.9 Flame propagation charac- teristics of bunched cables 3.5.10 Acid gas evolution 3.5.11 Smoke generation 3.5.12 Toxic gas emissio