UL SUBJECT 199J-2014 UL Outline for Investigation Fire Testing of Specific Application Sprinklers for Use on Windows (Issue 1)《在窗户上使用的特定应用喷淋器火灾试验的UL调查大纲 (议题1)》.pdf

《UL SUBJECT 199J-2014 UL Outline for Investigation Fire Testing of Specific Application Sprinklers for Use on Windows (Issue 1)《在窗户上使用的特定应用喷淋器火灾试验的UL调查大纲 (议题1)》.pdf》由会员分享，可在线阅读，更多相关《UL SUBJECT 199J-2014 UL Outline for Investigation Fire Testing of Specific Application Sprinklers for Use on Windows (Issue 1)《在窗户上使用的特定应用喷淋器火灾试验的UL调查大纲 (议题1)》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULMay 16, 20141UL 199JOutline of Investigation for Fire Testing of Specific Application Sprinklersfor Use on WindowsIssue No. 1May 16, 2014Summary of TopicsThis First Issue of the Outline of Invest

2、igation for Fire Testing of SpecificApplication Sprinklers for Use on Windows, UL 199J, is being issued toadd requirements for sprinkler types not currently covered by UL 199.ULs Outlines of Investigation are copyrighted by UL. Neither a printed norelectronic copy of an Outline of Investigation shou

3、ld be altered in any way. All ofULs Outlines of Investigation and all copyrights, ownerships, and rights regardingthose Outlines of Investigation shall remain the sole and exclusive property of UL.COPYRIGHT 2014 UNDERWRITERS LABORATORIES INC.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODU

4、CTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULMAY 16, 2014UL 199J2No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCONTENTSINTRODUCTION1 Scope .42 Components 43 Units of Measurement .54 Undated References 5PERFORMANCE5 Fire

5、 Tests for Sprinklers Used to Protect Heat Strengthened, Tempered Glazing Materials withInstructions to Keep Combustibles at Least 2 inches (50.8 mm) Away from the Glazing Surface.56 Fire Tests for Sprinklers Used with a Fire Rated Glazing Material without a Limitation for KeepingCombustibles at Lea

6、st 2 inches (50.8 mm) Away from the Glazing Surface .56.1 General .56.2 Test Arrangement 66.3 Test method .8MAY 16, 2014 UL 199J 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULINTRODUCTION1 Scope1.1 These requirements cover the fire testing

7、of specific application sprinklers for use on non-operablewindows when the sprinklers are installed in accordance with the manufacturers instructions and theStandard for the Installation of Sprinkler Systems, NFPA 13.1.2 Sprinklers investigated in accordance with this Outline shall also comply with

8、the applicablerequirements in the Standard for Automatic Sprinklers for Fire-Protection Service, UL 199, not includingthe fire and water distribution tests.1.3 The requirements described herein are intended to investigate the ability of the sprinklers to providewater on the surface of a window to li

9、mit the transmission of heat from a fire to the glazing material andmaintain the integrity of the window.1.4 These sprinklers have not been investigated for use as a substitute for fire protection rated glazingmaterials investigated in accordance with ANSI/UL 9, Fire Tests of Window Assemblies.2 Com

10、ponents2.1 Except as indicated in 2.2, a component of a product covered by this Outline shall comply with therequirements for that component.2.2 A component is not required to comply with a specific requirement that:a) Involves a feature or characteristic not required in the application of the compo

11、nent in theproduct covered by this Outline, orb) Is superseded by a requirement in this Outline.2.3 A component shall be used in accordance with its rating established for the intended conditions ofuse.2.4 Specific components are incomplete in construction features or restricted in performance capab

12、ilities.Such components are intended for use only under limited conditions, such as temperatures not exceedingspecified limits, and shall be used only under those specific conditions.MAY 16, 2014UL 199J4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION

13、 FROM UL3 Units of Measurement3.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory orapproximate information.4 Undated References4.1 Any undated reference to a code or standard appearing in the requirements of this Outline shall beinterpreted as referring

14、to the latest edition of that code or standard.PERFORMANCE5 Fire Tests for Sprinklers Used to Protect Heat Strengthened, Tempered Glazing Materials withInstructions to Keep Combustibles at Least 2 inches (50.8 mm) Away from the Glazing Surface5.1 Sprinklers intended to protect heat strengthened, tem

15、pered glazing materials with instructions to keepcombustibles at least 2 inches (50.8 mm) away from glazing surface shall be tested in accordance withULC/ORD-C262.1-99, Sprinkler Protected Window Systems using the minimum glazing thicknessspecified in the manufacturers installation instructions.6 Fi

16、re Tests for Sprinklers Used with a Fire Rated Glazing Material without a Limitation forKeeping Combustibles at Least 2 inches (50.8 mm) Away from the Glazing Surface6.1 General6.1.1 In addition to complying with ULC/ORD-C262.1-99 when tested in accordance with 5.1 using a heatstrengthened, tempered

17、 glazing material, sprinklers intended for use with a fire rated glazing materialwithout a limitation for keeping combustibles at least 2 inches (50.8 mm) away from the glazing surfaceshall comply with 6.1.2 when tested as described in 6.2.1 6.3.3.6.1.2 When fire tested as described in 6.2.1 6.3.3 t

18、he glazing material shall not show any visualevidence of cracking or breakage when water is discharged onto the glazing surface that has beensubjected to a localized heat source.6.1.3 The fire rated glazing referenced in 6.1.1 shall have the following characteristics:a) A fire rated window that demo

19、nstrated compliance with ANSI/UL 9, Standard for Fire Testsof Window Assemblies with a minimum 20 minute fire resistance rating and a hose streamrating.b) The area and height limitations associated with the rating of the glazing referenced in6.1.3(a) shall not be exceeded.c) The glazing does not uti

20、lize a film on the exterior surfaces.MAY 16, 2014 UL 199J 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL6.2 Test Arrangement6.2.1 Glazing test structure6.2.1.1 The glazing material is to be installed in a frame using the materials and compo

21、nents necessaryfor a complete installation.6.2.1.2 The width of the glazing is not to be less than 6 ft. (1.8 m) and the height is to be the maximumreferenced in the manufacturers instructions for use with the glazing material tested. Butt joining sectionsof glazing is permitted to be used to achiev

22、e the minimum glazing width.6.2.1.3 The frame with the glazing installed in a vertical orientation is to be supported in a manner toprovide stability when exposed during the fire testing.6.2.1.4 The glazing assembly is to be installed in a draft free room so that the flame from the fire sourcewill e

23、xtend vertically above the pan containing heptane and against the surface of the glazing material.Barriers along the sides of the glazing assembly are permitted to be used, if they are needed to providethe required flame impingement on the glazing surface.6.2.1.5 Thermocouples are to be located on t

24、he exposed and non-exposed side of the glazing material atan elevation of 1 ft (0.3 m), 3 ft (0.9 m) and 5 ft. (1.5 m) directly above the top of the pan of heptane. SeeFigure 6.1. The thermocouples are to be secured to the glazing material using a conductive, hightemperature epoxy material capable o

25、f maintaining the thermocouple in the secured position.This is generated text for figtxt.MAY 16, 2014UL 199J6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULFigure 6.1General Test ConfigurationFront elevation view of test arrangementMAY 16, 20

26、14 UL 199J 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL6.2.2 Fire source6.2.2.1 A nominal 10 by 10 inch (254 by 254 mm) square steel pan having a height of not less than 1.25inches (32 mm) containing not less than 50 ounces (1.5 L) of hep

27、tane is to be used as the fire source.The freeboard distance above the liquid to the top of the pan shall not exceed 0.75 inch (19 mm).6.2.2.2 The pan is to be slightly elevated above the floor and inset within the window frame so that thepan contacts the glazing material.6.2.3 Sprinkler installatio

28、n6.2.3.1 If the width of the glazing does not exceed the sprinkler coverage width, one sprinkler is to beinstalled at the center of the glazing. If the width of the glazing is greater than the sprinkler coverage width,two sprinklers shall be installed at their minimum allowable distance between the

29、sprinklers. The sprinklersare to be installed at distances below the top of the glazing and away from the surface of the glazing thatare within the criteria specified by the sprinkler manufacturer.6.2.3.2 One test is to be conducted using the minimum pressure specified by the manufacturer and asecon

30、d test is to be conducted at the nominal 100 psig inlet pressure.6.2.3.3 For each test, open sprinklers are to be used and the desired discharge pressure is to beestablished using a manually or electronically controlled, quick opening type valve. Each sprinkler is to besupplied with piping having a

31、nominal diameter of not less than 1 inch (25 mm).6.2.3.4 The flow and pressure to the sprinkler is to be continuously recorded using calibrated measuringinstruments.6.3 Test method6.3.1 To initiate each test, the pan of heptane is to be ignited and allowed to burn freely for 5 minutes orwhen the gla

32、zing temperature located 1 ft. (0.3 m) above the pan of heptane reaches 932 F (500 C),whichever occurs last.6.3.2 At the end of the free-burn period, water is to be discharged from the sprinkler at the required inletpressure for not less than 30 seconds.6.3.3 After the sprinkler discharge, the glazing is to be visually examined for evidence of any cracking orbreakage.MAY 16, 2014UL 199J8