TIA-2000 3-F-1-2014 Medium Access Control (MAC) Standard for cdma2000 Spread Spectrum Systems (Incorporates Addendum 1).pdf

《TIA-2000 3-F-1-2014 Medium Access Control (MAC) Standard for cdma2000 Spread Spectrum Systems (Incorporates Addendum 1).pdf》由会员分享，可在线阅读，更多相关《TIA-2000 3-F-1-2014 Medium Access Control (MAC) Standard for cdma2000 Spread Spectrum Systems (Incorporates Addendum 1).pdf（340页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-2000.3-F-1E June 2014Medium Access Control (MAC) Standard for cdma2000Spread Spectrum SystemsNOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability an

2、d improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products

3、 not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards

4、 Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable

5、regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. TIA-PN-2000.3-F-1E, formulated under the cognizance of the TIA TR-45 Mobi

6、le (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may i

7、nvolve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a

8、 statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or c

9、onditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as re

10、spects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwi

11、se), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative

12、Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute ide

13、ntification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the

14、 contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS

15、 INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PR

16、ODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INC

17、IDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOI

18、NG NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0003-F v2.0 Revision History Revision Description of Changes Date Rev.0 v1.0 Initial publication October 1999 Rev.A v1.0 Revision Jul

19、y 2000 Rev.0 v3.0 Addendum July 2001 Rev.A v5.0 Bug fix July 2001 Rev.A v6.0 Bug fix Februrary 2002 Rev.B v1.0 Revision April 2002 Rev.C v1.0 Revision May 2002 Rev.D v1.0 Revision March 2004 Rev.C v2.0 Bug fix September 2004 Rev.D v2.0 Bug fix October 2005 Rev.E v1.0 Revisoin September 2009 Rev.E v3

20、.0 Bug fix June 2011 Rev.F v1.0 Revision December 2012 Rev.F v2.0 Bug fix (Note: There is no change in this volume. Republished with other volumes) May 2014 3GPP2 C.S0003-F v2.0 i CONTENTS 1 1 INTRODUCTION 1-1 2 1.1 Scope 1-1 3 1.2 Terms . 1-2 4 1.3 Numeric Information . 1-10 5 1.4 Normative Referen

21、ces 1-13 6 1.5 Overview . 1-14 7 1.5.1 Layering Model 1-16 8 1.6 Conventions Used in this Document . 1-17 9 1.6.1 Service Interfaces 1-17 10 1.6.1.1 Service Primitives 1-17 11 1.6.2 Pseudo-code Rules 1-18 12 1.6.3 Requirements Terminology 1-18 13 2 Definition of MAC Components . 2-1 14 2.1 Service I

22、nterfaces (Informative) 2-1 15 2.1.1 Service Interface Primitives Received by the MAC Sublayer . 2-3 16 2.1.2 Service Interface Primitives Sent from the MAC Sublayer 2-4 17 2.1.3 Service Interface Primitives Sent From the FPDCHCF 2-7 18 2.1.4 Service Interface Primitives Received by the FPDCHCF . 2-

23、15 19 2.1.5 Service Interface Primitives Sent From the RPDCHCF . 2-19 20 2.1.6 Service Interface Primitives Received by the RPDCHCF . 2-25 21 2.1.7 Service Interface Primitives Received by the BMAC Multiplex Sublayer 2-29 22 2.1.8 Service Interface Primitives Sent from the BMAC Sublayer 2-32 23 2.2

24、Entities of the MAC Sublayer 2-33 24 2.2.1 MAC Sublayer Functional Entities 2-33 25 2.2.1.1 Mux and QoS Sublayer . 2-34 26 2.2.1.1.1 The Multiplex Sublayer . 2-34 27 2.2.1.1.1.1 Mobile Station Support 2-40 28 2.2.1.1.1.2 Service Priority . 2-42 29 2.2.1.1.1.3 Multiplex Sublayer Transmitting Function

25、 . 2-42 30 2.2.1.1.1.3.1 Assembling the Physical Layer FCH SDU 2-42 31 2.2.1.1.1.3.1.1 Mode A 2-42 32 3GPP2 C.S0003-F v2.0 ii 2.2.1.1.1.3.1.2 Mode B 2-42 1 2.2.1.1.1.3.2 Assembling the Physical Layer DCCH SDU . 2-45 2 2.2.1.1.1.3.2.1 Mode B 2-45 3 2.2.1.1.1.3.3 Assembling the Physical Layer SCCH SDU

26、 2-47 4 2.2.1.1.1.3.3.1 Mode A 2-47 5 2.2.1.1.1.3.3.2 Procedures for Adding and Dropping R-SCCHs 2-47 6 2.2.1.1.1.3.3.3 Procedures for the R-SCCH Transmission Preamble 2-48 7 2.2.1.1.1.3.3.4 Procedures for the R-SCCH Discontinuous Transmission 8 Preamble 2-48 9 2.2.1.1.1.3.4 Assembling the Physical

27、Layer SCH SDU 2-48 10 2.2.1.1.1.3.4.1 Mode B 2-48 11 2.2.1.1.1.3.4.1.1 LTU Assembly . 2-50 12 2.2.1.1.1.3.4.2 Procedures for Discontinuous Transmission (DTX) on 13 the R-SCH 2-51 14 2.2.1.1.1.3.5 Assembling the Physical Layer F-SCH Outer Code SDU 2-51 15 2.2.1.1.1.3.6 Base Station Assembly of the PD

28、CHCF SDU . 2-52 16 2.2.1.1.1.3.6.1 Mode B 2-52 17 2.2.1.1.1.3.7 Mobile Station Assembly of the PDCHCF SDU . 2-53 18 2.2.1.1.1.3.7.1 Mode B 2-53 19 2.2.1.1.1.4 Multiplex Sublayer Receiving Function 2-56 20 2.2.1.1.1.4.1 Processing the Received Physical Layer FCH SDU . 2-64 21 2.2.1.1.1.4.1.1 Mode A 2

29、-65 22 2.2.1.1.1.4.1.2 Mode B 2-65 23 2.2.1.1.1.4.2 Processing the Received Physical Layer DCCH SDU 2-67 24 2.2.1.1.1.4.2.1 Mode B 2-67 25 2.2.1.1.1.4.3 Processing the Received Physical Layer SCCH SDU . 2-69 26 2.2.1.1.1.4.3.1 Mode A 2-69 27 2.2.1.1.1.4.4 Processing the Received Physical Layer SCH S

30、DU . 2-70 28 2.2.1.1.1.4.4.1 Mode B 2-70 29 2.2.1.1.1.4.4.1.1 Non-LTU Processing 2-70 30 2.2.1.1.1.4.4.1.2 LTU Processing . 2-71 31 2.2.1.1.1.4.5 Mobile Station Processing of the Received PDCHCF 32 SDU 2-72 33 3GPP2 C.S0003-F v2.0 iii 2.2.1.1.1.4.5.1 Mode B 2-72 1 2.2.1.1.1.4.6 Base Station Processi

31、ng of the Received PDCHCF SDU . 2-73 2 2.2.1.1.1.4.6.1 Mode B 2-73 3 2.2.1.1.1.5 MuxPDU Types Processed by the Multiplex Sublayer . 2-75 4 2.2.1.1.1.5.1 MuxPDU Type 1 2-79 5 2.2.1.1.1.5.2 MuxPDU Type 2 2-79 6 2.2.1.1.1.5.3 MuxPDU Type 3 2-81 7 2.2.1.1.1.5.4 MuxPDU Type 4 2-81 8 2.2.1.1.1.5.5 MuxPDU

32、Type 5 2-82 9 2.2.1.1.1.5.6 MuxPDU Type 6 2-85 10 2.2.1.1.1.5.7 MuxPDU Type 7 2-85 11 2.2.1.1.1.5.7.1 Coexistence Mode 2-86 12 2.2.1.1.1.6 Interface to Signaling LAC 2-88 13 2.2.1.1.1.6.1 The MAC-SDUReady.Request Primitive . 2-89 14 2.2.1.1.1.6.2 The MAC-Availability.Indication Primitive 2-89 15 2.2

33、.1.1.1.6.3 The MAC-Data.Request Primitive 2-90 16 2.2.1.1.1.6.4 The MAC-Data.Indication Primitive . 2-90 17 2.2.1.1.1.7 Interface to the Physical Layer . 2-91 18 2.2.1.1.1.7.1 The FCH Transmit Request Service Interface . 2-91 19 2.2.1.1.1.7.2 The DCCH Transmit Request Service Interface 2-92 20 2.2.1

34、.1.1.7.3 The SCCH Transmit Request Service Interface 2-92 21 2.2.1.1.1.7.4 The SCH Transmit Request Service Interface . 2-93 22 2.2.1.1.1.7.5 The FCH Receive Indication Service Interface 2-93 23 2.2.1.1.1.7.6 The DCCH Receive Indication Service Interface . 2-93 24 2.2.1.1.1.7.7 The SCCH Receive Indi

35、cation Service Interface 2-94 25 2.2.1.1.1.7.8 The SCH Receive Indication Service Interface 2-94 26 2.2.1.1.1.7.9 The SCH Outer Code Transmit Request Service 27 Interface 2-95 28 2.2.1.1.1.7.10 The SCH Outer Code Receive Indication Service 29 Interface 2-95 30 2.2.1.1.1.8 Interface to the Forward Pa

36、cket Data Channel Control 31 Function 2-96 32 3GPP2 C.S0003-F v2.0 iv 2.2.1.1.1.8.1 The FPDCHCF Receive Indication Service Interface . 2-96 1 2.2.1.1.1.9 Interface to the Reverse Packet Data Channel Control 2 Function 2-96 3 2.2.1.1.1.9.1 The RPDCHCF Receive Indication Service Interface . 2-96 4 2.2

37、.1.1.1.9.2 The RPDCH Transmit Request Service Interface 2-96 5 2.2.1.1.2 SRBP and Common Channel Multiplex Sublayer . 2-97 6 2.2.1.1.2.1 Overview (Informative) 2-97 7 2.2.1.1.2.1.1 Sync Channel . 2-97 8 2.2.1.1.2.1.2 Forward Common Control Channel . 2-99 9 2.2.1.1.2.1.3 Broadcast Control Channel . 2

38、-100 10 2.2.1.1.2.1.4 Paging Channel . 2-102 11 2.2.1.1.2.1.5 Access Channel Procedures 2-103 12 2.2.1.1.2.1.5.1 R-ACH Structure . 2-109 13 2.2.1.1.2.1.5.2 R-ACH Message Capsule Structure . 2-111 14 2.2.1.1.2.1.6 Enhanced Access Channel Procedures 2-111 15 2.2.1.1.2.1.6.1 Access Mode Selection . 2-1

39、11 16 2.2.1.1.2.1.6.2 Common Procedures for Basic Access Mode and 17 Reservation Access Mode . 2-113 18 2.2.1.1.2.1.6.3 Basic Access Mode 2-113 19 2.2.1.1.2.1.6.4 Reservation Access Mode . 2-113 20 2.2.1.1.2.1.6.4.1 Non-Acknowledgment Processing 2-114 21 2.2.1.1.2.1.6.4.2 Soft Handoff Not Supported/

40、Not Granted 2-114 22 2.2.1.1.2.1.6.4.3 Soft Handoff Granted 2-116 23 2.2.1.1.2.1.6.5 Mapping the Logical Address to a Physical F-CPCSCH . 2-24 117 25 2.2.1.1.2.2 Mobile Station Procedures 2-117 26 2.2.1.1.2.2.1 Sync Channel Procedures . 2-117 27 2.2.1.1.2.2.2 Paging Channel Procedures . 2-118 28 2.2

41、.1.1.2.2.3 Access Channel Procedures 2-118 29 2.2.1.1.2.2.3.1 Processing of the MAC-SDUReady.Request Primitive . 2-30 118 31 2.2.1.1.2.2.3.2 Transmitting an Access Probe . 2-119 32 2.2.1.1.2.2.3.3 Processing of the MAC-Data.Request Primitive 2-120 33 3GPP2 C.S0003-F v2.0 v 2.2.1.1.2.2.3.4 Hash Funct

42、ion 2-120 1 2.2.1.1.2.2.4 Enhanced Access Channel Procedures 2-123 2 2.2.1.1.2.2.4.1 Processing of the MAC-SDUReady.Request Primitive . 2-3 125 4 2.2.1.1.2.2.4.2 Processing of the MAC-Data.Request Primitive 2-127 5 2.2.1.1.2.2.4.3 Enhanced Access Mode Selection Algorithm 2-131 6 2.2.1.1.2.2.4.4 Asse

43、mbling of the R-EACH Header 2-134 7 2.2.1.1.2.2.4.5 Calculation of EACH_ID 2-136 8 2.2.1.1.2.2.4.6 Calculation of Common Power Control Subchannel 9 Index 2-136 10 2.2.1.1.2.2.5 Common Assignment Channel Procedures 2-137 11 2.2.1.1.2.2.5.1 Processing of the Early Acknowledgment Channel 12 Assignment

44、Message . 2-137 13 2.2.1.1.2.2.5.2 Processing of the Power Control Channel Assignment 14 Message 2-139 15 2.2.1.1.2.2.6 Broadcast Control Channel Procedures . 2-140 16 2.2.1.1.2.2.7 Forward Common Control Channel Procedures . 2-141 17 2.2.1.1.2.2.8 Reverse Common Control Channel Procedures 2-141 18

45、2.2.1.1.2.2.9 Reverse Pilot Channel Procedures . 2-142 19 2.2.1.1.2.3 Base Station Procedures 2-142 20 2.2.1.1.2.3.1 Sync Channel Procedures . 2-142 21 2.2.1.1.2.3.2 Paging Channel Procedures . 2-142 22 2.2.1.1.2.3.3 Access Channel Procedures 2-143 23 2.2.1.1.2.3.4 Enhanced Access Channel Procedures

46、 2-143 24 2.2.1.1.2.3.5 Common Assignment Channel Procedures 2-144 25 2.2.1.1.2.3.5.1 Assembling of the Early Acknowledgment Channel 26 Assignment Message . 2-145 27 2.2.1.1.2.3.5.2 Assembling of the Power Control Channel Assignment 28 Message 2-147 29 2.2.1.1.2.3.6 Broadcast Control Channel Procedu

47、res . 2-148 30 2.2.1.1.2.3.7 Forward Common Control Channel Procedures . 2-148 31 2.2.1.1.2.3.8 Reverse Common Control Channel Procedures 2-149 32 2.2.1.1.2.3.9 Procedures for Generating the Channel Identifier 2-150 33 3GPP2 C.S0003-F v2.0 vi 2.2.1.2 Forward Packet Data Channel Control Function Proc

48、edures . 2-150 1 2.2.1.2.1 MAC Layer Addressing of Mobile Stations 2-151 2 2.2.1.2.2 Encoding of Encoder Packets on the F-PDCH and Incremental 3 Redundancy in Retransmission . 2-152 4 2.2.1.2.3 Concurrent Operation of Multiple ARQ Channels 2-153 5 2.2.1.2.4 Code Division Multiplexing 2-153 6 2.2.1.2

49、.5 Determination of New Encoder Packet Transmissions . 2-153 7 2.2.1.2.6 Forward Packet Data Channel Operation Procedures 2-154 8 2.2.1.2.6.1 Forward Packet Data Channel Procedures for Decoding 9 Encoder Packets 2-159 10 2.2.1.2.6.2 Timing for Forward Packet Data Channel Operations . 2-159 11 2.2.1.2.7 CQI Feedback Operations 2-160 12 2.2.1.2.7.1 R-CQICH Transmission Timing Examples 2-162 13 2.2.1.2.7.1.1 R-CQICH Timing Examples Outside the Switching 14 Interval with No Pilot Gating . 2-164 15 2.2.1.2.7.1.2 R-CQICH Timing Examples Outside the Switching 16 Interval with Pilot Gating 2-