TIA-136-133-E-2004 TDMA- Third Generation Wireless- Digital Traffic Channel Layer Three (ANSI APPROVAL WITHDRAWN JUNE 12 2015)《TDMA 第三代无线-数字话务量信道层3》.pdf

《TIA-136-133-E-2004 TDMA- Third Generation Wireless- Digital Traffic Channel Layer Three (ANSI APPROVAL WITHDRAWN JUNE 12 2015)《TDMA 第三代无线-数字话务量信道层3》.pdf》由会员分享，可在线阅读，更多相关《TIA-136-133-E-2004 TDMA- Third Generation Wireless- Digital Traffic Channel Layer Three (ANSI APPROVAL WITHDRAWN JUNE 12 2015)《TDMA 第三代无线-数字话务量信道层3》.pdf（288页珍藏版）》请在麦多课文档分享上搜索。

1、 ANSI/TIA-136-133-E-2004 APPROVED: JANUARY 13, 2004 REAFFIRMED: MAY 28, 2013 WITHDRAWN: JUNE 12, 2015 TIA-136-133-E (Revision of ANSI/TIA-136-133-D) January 2004TDMA- Third Generation Wireless- Digital Traffic Channel Layer Three NOTICE TIA Engineering Standards and Publications are designed to serv

2、e the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such

3、 Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, eith

4、er domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting t

5、he Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability o

6、f regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-136.133-E-RF1-WD, formulated under the cognizance of th

7、e TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of thi

8、s Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to T

9、IAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any lice

10、nsing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been com

11、plied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommend

12、ation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance rel

13、ating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records o

14、r publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products,

15、designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MER

16、CHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, O

17、R THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDI

18、NG WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF

19、 ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA/EIA-136-133-EiContents1. Discontinuous-Transmission.11.1 Discontinuous-Transmissio

20、n on a Digital Traffic Channel 11.1.1 Mobile Station Operation and DTX Low Switching 22. Mobile Assisted Handoff - Mobile Station 32.1 Mobile General Operational Description .32.2 Mobile Assisted Handoff Messages .32.2.1 Procedures to Start Channel Quality Measurements and Reporting .42.2.2 Procedur

21、es to Stop Channel Quality Measurements and Reporting .42.2.3 Reporting of Measurement Results.42.2.4 Measurement Status After Handoff 52.3 MAHO Operations With DTX Operation 52.4 Mobile Measurement Procedures.52.4.1 Current Traffic Channel52.4.1.1 Bit Error Rate (BER). 52.4.1.1.1 BER Measurement Te

22、chnique 62.4.1.2 Signal Strength 72.4.1.2.1 Signal Strength Measurement Technique . 72.4.1.2.2 Extended MAHO Signal Strength Measurement Technique 92.4.1.3 Carrier to Interference Ratio (CIR) 122.4.1.3.1 Carrier to Interference Ratio (CIR) Measurement Technique. 162.4.1.4 Word Error Rate (WER) 172.4

23、.1.4.1 WER Measurement Technique 172.4.2 Measurement Procedures for RF Channels Other Than the Current Channel.192.4.3 Reporting Interval Determination.203. Charging Rate and Total Charge Indication - Mobile Station213.1 CRI General Operational Description 213.2 Charging Rate Information.213.3 Optio

24、nal Mobile Station Charge Calculation .233.3.1 Description of Optional Handling of CRI Elements .233.3.1.1 Initial/Fixed Charge. 233.3.1.2 Initial Time Related Charge 233.3.1.3 Time Related Charge. 233.3.1.4 Initial Data Related Charge . 243.3.1.5 Data Related Charge 243.3.1.6 Notes on Handling of C

25、RI Elements . 243.3.2 Handling of Call Meters .243.3.2.1 Current Call Meter 243.3.2.2 Accumulated Call Meter 253.3.2.3 ACM Maximum Value 253.3.2.4 Prepayment Meter . 25TIA/EIA-136-133-Eii3.3.3 Special Processing 253.3.3.1 Zero E7 253.3.3.2 Zero E8 263.3.3.3 Zero E2, E6 263.3.3.4 Subsequent E3263.3.3

26、.5 CDUR Threshold .263.3.3.6 Subsequent E1, E2, or E7 263.3.3.7 Data Segments Threshold.263.3.3.8 Subsequent E5, E6 or E8 .273.3.3.9 Free Calls .273.3.3.10 Multiple Calls.273.4 TCI General Operational Description.273.5 Total Charge Information .283.6 Procedures to Start CRI Charging Interval .283.6.

27、1 Mobile Terminated Calls 283.6.2 Mobile Originated Calls293.7 Procedures for Processing TCI.293.7.1 Processing During Call Release293.7.2 Processing After Call Release.294. Mobile Station Control on the Digital Traffic Channel - Mobile Station .304.1 Loss of Radio-Link Continuity .304.2 Time Alignm

28、ent304.2.1 Time Alignment Process.304.2.2 Time Alignment at Initial Traffic Channel Assignment314.2.3 Time Alignment at Handoff 324.3 Confirm Initial Traffic Channel334.4 Alerting.364.4.1 Waiting for Order .364.4.2 Waiting for Answer.444.5 Conversation.514.6 Release624.7 General Rules for Message Ex

29、change on Digital Traffic Channel .634.7.1 Transmission of Messages 634.7.2 Acknowledgment of Received Messages644.7.3 Encoding Messages into Words644.7.4 Decoding Words into Messages644.7.5 Encoding and Decoding of Information Elements 654.8 Power Down .654.9 MS Originated ARQ on DTC.654.9.1 Start

30、ARQ Mode .654.9.2 ARQ BEGIN Status Update664.9.3 ARQ Mode Continuation664.9.4 ARQ CONTINUE Status Update .67TIA/EIA-136-133-Eiii4.10 MS Terminated ARQ on DTC .674.10.1 Start ARQ Mode.674.10.2 ARQ Mode Continuation685. Signaling Formats - Mobile Station .705.1 Reverse Digital Traffic Channel (RDTC).7

31、05.1.1 Protocol Structure for the Traffic Channel .705.1.1.1 Fast Associated Control Channel (FACCH) - /4 DQPSK . 705.1.1.1.1 Data Stream Format (FACCH) . 705.1.1.1.2 Interleaving. 715.1.1.1.3 Error Detection and DVCC Identifier. 735.1.1.1.4 Convolutional Coding 745.1.1.1.5 Word Format 755.1.1.2 Fas

32、t Associated Control Channel (FACCH) - 8-PSK with Full-Rate Operation. 765.1.1.2.1 Data Stream Format (FACCH) . 765.1.1.2.2 Interleaving. 765.1.1.2.2.1 FACCH Interleaving During US1 Operation (TIA/EIA-136-430) 765.1.1.2.2.2 FACCH Interleaving During AMR Operation (TIA/EIA-136-440) 795.1.1.2.3 Error

33、Detection and DVCC Identifier. 835.1.1.2.4 Convolutional Coding 845.1.1.2.5 Word Format 855.1.1.3 Fast Associated Control Channel (FACCH) - 8 PSK with Half-Rate Operation. 865.1.1.3.1 Data Stream Format (FACCH) . 865.1.1.3.2 Interleaving. 865.1.1.3.3 Error Detection and DVCC Identifier. 885.1.1.3.4

34、Convolutional Coding 895.1.1.3.5 Word Format 905.1.1.4 Slow Associated Control Channel (SACCH) 915.1.1.4.1 Interleaving. 915.1.1.4.2 Forward Error Correction . 925.1.1.4.3 Word Synchronization 935.1.1.4.4 Word Format 935.1.2 RDTC Messages.945.1.2.1 Message Structure . 945.1.2.2 Message Functional De

35、finition 965.1.2.2.1 Connect. 995.1.2.2.2 Measurement Order Ack. 995.1.2.2.3 Channel Quality Message 1 1005.1.2.2.4 Channel Quality Message 2 1005.1.2.2.5 Channel Quality Message 3 1015.1.2.2.6 Channel Quality Message 4 1025.1.2.2.7 Physical Layer Control Ack 1035.1.2.2.8 Release 1045.1.2.2.9 Mobile

36、 Ack. 1045.1.2.2.10 Flash With Info. 1055.1.2.2.11 Send Burst DTMF 106TIA/EIA-136-133-Eiv5.1.2.2.12 Send Continuous DTMF .1065.1.2.2.13 Status Message 1075.1.2.2.14 Flash With Info Ack 1085.1.2.2.15 Parameter Update Ack.1085.1.2.2.16 SSD Update Order Confirmation 1095.1.2.2.17 Base Station Challenge

37、 Order .1095.1.2.2.18 Unique Challenge Order Confirmation .1095.1.2.2.19 R-DATA1105.1.2.2.20 R-DATA ACCEPT1115.1.2.2.21 R-DATA REJECT.1125.1.2.2.22 Capability Update Request1125.1.2.2.23 Capability Update Response1135.1.2.2.24 SOC Message Delivery .1155.1.2.2.25 BSMC Message Delivery 1155.1.2.2.26 H

38、yperband Measurement Order Ack.1165.1.2.2.27 Service Request .1175.1.2.2.28 Re-Authentication Order Confirmation.1185.1.2.2.29 Extended Measurement Order Ack1185.1.2.2.30 Extended Channel Quality Message 1.1195.1.2.2.31 Extended Channel Quality Message 2.1205.1.2.2.32 Extended Channel Quality Messag

39、e 3.1215.1.2.2.33 Extended Channel Quality Message 4.1225.1.2.2.34 Comfort Noise Parameter Message .1235.1.2.2.35 AMR Comfort Noise Parameter 1245.1.2.2.36 AMR Implicit Comfort Noise1255.1.2.3 Information Element Description.1255.1.2.3.1 800 MHz Analog Speech Support.1255.1.2.3.2 Ack Message Type 12

40、55.1.2.3.3 ADVICE Slot Map1255.1.2.3.4 ADVICE Status Indicator1265.1.2.3.5 ADVICE Support 1265.1.2.3.6 Async Data Support.1265.1.2.3.7 ATS .1265.1.2.3.8 AUTHBS.1275.1.2.3.9 AUTHRA 1275.1.2.3.10 AUTHU.1275.1.2.3.11 Bandwidth .1275.1.2.3.12 BER of Current Channel .1275.1.2.3.13 BSMC1275.1.2.3.14 BSMC

41、Change Indicator .1275.1.2.3.15 Called Party Number .1285.1.2.3.16 Calling Party Name .1285.1.2.3.17 Calling Party Number1295.1.2.3.18 Call Mode1295.1.2.3.19 Cause.1295.1.2.3.20 Charging Rate Information1305.1.2.3.21 CMI/CMC Data.130TIA/EIA-136-133-Ev5.1.2.3.22 CMI/CMC Phase 1305.1.2.3.23 CMI/CMR Da

42、ta 1315.1.2.3.24 CN Energy Quantization. 1315.1.2.3.25 Color Code SAT/DVCC. 1315.1.2.3.26 COUNT 1315.1.2.3.27 Countdown Status. 1315.1.2.3.28 Current Channel Quality Report. 1325.1.2.3.29 Custom Control 1325.1.2.3.30 DADS Support . 1325.1.2.3.31 DTC Extended Voice Mode . 1325.1.2.3.32 Data Mode 1335

43、.1.2.3.33 Data Privacy Mode . 1335.1.2.3.34 Delay Interval Compensation Mode . 1335.1.2.3.35 Delta Time 1345.1.2.3.36 Digital Control Channel Information 1345.1.2.3.37 Digit 1345.1.2.3.38 Digits 1345.1.2.3.39 Double Rate DTC Support . 1355.1.2.3.40 Downlink Power Control Info 1355.1.2.3.41 DTX Allow

44、ed . 1355.1.2.3.42 DTX Control. 1365.1.2.3.43 DTX Mode . 1365.1.2.3.44 Encryption State and Key Strength. 1365.1.2.3.45 Equipment Identity . 1365.1.2.3.46 FACCH/SACCH ARQ Map. 1375.1.2.3.47 Feature Indicator. 1375.1.2.3.48 Firmware Vintage . 1375.1.2.3.49 FPC Status 1375.1.2.3.50 Freeze Indicator 13

45、85.1.2.3.51 G3-Fax Support 1385.1.2.3.52 Half-Rate DTC Support 1385.1.2.3.53 Interleaving. 1385.1.2.3.54 Interleaving Support Map. 1385.1.2.3.55 IRA Support . 1395.1.2.3.56 ISO-8859-1 (Latin 1) Support 1395.1.2.3.57 ISO-8859-2 (Latin 2) Support 1395.1.2.3.58 ISO-8859-3 (Latin 3) Support 1395.1.2.3.5

46、9 ISO-8859-4 (Latin 4) Support 1395.1.2.3.60 ISO-8859-5 (Latin/Cyrillic) Support 1395.1.2.3.61 ISO-8859-6 (Latin/Arabic) Support . 1395.1.2.3.62 ISO-8859-7 (Greek) Support 1405.1.2.3.63 ISO-8859-8 (Latin/Hebrew) Support 1405.1.2.3.64 ISO-8859-9 (Latin 5) Support 1405.1.2.3.65 ISO-8859-10 (Latin 6) S

47、upport 1405.1.2.3.66 ISO-8859-11 (Latin/Tai) Support. 1405.1.2.3.67 ISO-8859-12 Support . 1405.1.2.3.68 ISO-8859-13 (Latin 7) Support 140TIA/EIA-136-133-Evi5.1.2.3.69 ISO-8859-14 (Latin 8 - Celtic) Support 1405.1.2.3.70 ISO-8859-15 (Latin 9) Support.1405.1.2.3.71 ISO-10646 (BMP) Support .1405.1.2.3.

48、72 Keypad Facility .1415.1.2.3.73 LSF Residual Vector .1415.1.2.3.74 Last Decoded Parameter1415.1.2.3.75 MAX_SUPPORTED_PFC1415.1.2.3.76 Manufacturer Code1415.1.2.3.77 Measurement Order/Mobile Ack Support .1425.1.2.3.78 Measurement Type 1425.1.2.3.79 Message Encryption Algorithm Map.1425.1.2.3.80 Mes

49、sage Encryption Key Map.1425.1.2.3.81 Message Encryption Mode A 1425.1.2.3.82 Message Encryption Mode B 1435.1.2.3.83 Message Encryption Mode C 1435.1.2.3.84 Message Type1435.1.2.3.85 Model Number of Mobile1465.1.2.3.86 Modulation Support Map 1465.1.2.3.87 Multilingual Calling Party Name 1465.1.2.3.88 Multilingual DTC Display.1475.1.2.3.89 Multilingual Teleservice Server Address.1475.1.2.3.90 Multilingual User Destination Address .1485.1.2.3.91 Multilingual User Originating Address .1485.1.2.3.92 New DTC Information.1485.1.2.3.93 OATS Support.1485.1.2.3.94 Other Messages Waiting I