TIA-102 CABC-B-2010 Project 25 Interoperability Testing for Voice Operation in Trunked Systems《项目25 中继系统中语音操作的互操作性测试》.pdf

《TIA-102 CABC-B-2010 Project 25 Interoperability Testing for Voice Operation in Trunked Systems《项目25 中继系统中语音操作的互操作性测试》.pdf》由会员分享，可在线阅读，更多相关《TIA-102 CABC-B-2010 Project 25 Interoperability Testing for Voice Operation in Trunked Systems《项目25 中继系统中语音操作的互操作性测试》.pdf（74页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-102.CABC-B (Revision of TIA-102.CABC-A) November 2010 Project 25 Interoperability Testing for Voice Operation in Trunked Systems NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers

2、, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA fr

3、om manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance

4、with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associ

5、ated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-0150-RV2, formulated und

6、er the cognizance of the TIA, TR-8 Mobile and Personal Private Radio Standards. TR-8.25 Subcommittee onCompliance Assessment). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Cata

7、log of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS USA and Canada (1-800-525-7052 ) International (303-790-0600) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document i

8、s copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www

9、.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body i

10、n its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights,

11、 owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position w

12、ith reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed lic

13、ensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a documen

14、t published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA En

15、gineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1)

16、 of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not

17、 enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION

18、, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE

19、 CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL

20、 NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR T

21、HE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD

22、 NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA 102.CABC-B i Foreword (This forward is not part of this standard.) This TIA Standard was prepared by the Compliance Assessment Processes and Procedures Task Group under the APCO Project 25 Interface Committee (APIC). It has been formulated throu

23、gh the TIA TR-8 engineering committee on Mobile and Portable Private Radio Standards. This Standard represents the consensus of the drafting task group and the formulating committee at the time of publication. This revision of the standard replaces the previous revision of the standard. This documen

24、t defines test cases and configurations for testing the interoperability of Project 25 digital trunked subscribers and FNE when the subscribers are at home and roaming. The configurations defined in the document enable testing at home and during intra-system, inter-system, and inter-WACN roaming sce

25、narios. However, these tests do not constitute interoperability testing of the P25 Inter-RF Subsystem Interface, which is defined in separate P25 standards. This document is part of the suite of documents comprising Project 25 standards. TIA-102.CABC-B ii Table of Contents 1 INTRODUCTION. 1 1.1 DISC

26、LAIMER.1 1.2 ABBREVIATIONS 1 1.3 DEFINITIONS.1 1.4 REFERENCES.2 1.4.1 Normative References2 1.4.2 Informative References 2 1.5 REVISION HISTORY.2 1.6 SCOPE AND LIMITS OF TESTING3 2 TEST PROCEDURE. 4 2.1 OVERVIEW4 2.1.1 System Configuration.5 2.1.1.1 Home and Roaming Testing6 2.1.1.2 Method 1 - fixed

27、 FNE.8 2.1.1.3 Method 2 - fixed SUs.9 2.1.2 Documentation of Procedures11 2.2 TEST PROCEDURES13 2.2.1 TEST SUITE: Full registration 14 2.2.1.1 Description14 2.2.1.2 Expected behavior.14 2.2.1.3 Initial conditions.14 2.2.1.4 Procedures14 2.2.1.4.1 Test case 1 - Valid registration.14 2.2.1.4.2 Test ca

28、se 2 - Denied or refused registration.14 2.2.1.4.3 Test case 3 - Unverified registration.15 2.2.2 TEST SUITE: Group voice call.15 2.2.2.1 Description15 2.2.2.2 Expected behavior.15 2.2.2.3 Initial conditions.15 2.2.2.4 Procedure16 2.2.2.4.1 Test case 1 - Group call granted16 2.2.2.4.2 Test case 2 -

29、Group call denied .16 2.2.2.4.3 Test case 3 - Group call request queued17 TIA 102.CABC-B iii 2.2.2.4.4 Test case 4 - Group call interrupt17 2.2.2.4.5 Test case 5 - Group call routing 18 2.2.2.4.6 Test case 6 - Late entry for group call. 18 2.2.3 TEST SUITE: Unit-to-unit voice call.19 2.2.3.1 Descrip

30、tion19 2.2.3.2 Expected behavior19 2.2.3.3 Initial conditions19 2.2.3.4 Procedure.20 2.2.3.4.1 Test case 1 - Unit-to-unit call with target availability check20 2.2.3.4.2 Test case 2 - unit-to-unit call with target availability check denied by target 20 2.2.3.4.3 Test case 3 - Unit-to-unit call queue

31、d with target availability check - traffic channel assignment after target availability check.21 2.2.3.4.4 Test case 4 - Unit-to-unit call queued with target availability check - traffic channel assignment before target availability check22 2.2.3.4.5 Test case 5 - Unit-to-unit call without target av

32、ailability check.22 2.2.3.4.6 Test case 6 - Unit-to-unit call queued without target availability check 23 2.2.3.4.7 Test case 7 - Unit-to-unit call denied.24 2.2.4 TEST SUITE: Broadcast voice call 24 2.2.4.1 Description24 2.2.4.2 Expected behavior24 2.2.4.3 Initial conditions24 2.2.4.4 Procedure.24

33、2.2.4.4.1 Test case 1 - Broadcast voice call.24 2.2.5 TEST SUITE: Affiliation .25 2.2.5.1 Description25 2.2.5.2 Expected behavior25 2.2.5.3 Initial conditions25 2.2.5.4 Procedure.25 2.2.5.4.1 Test case 1 - Radio permitted to affiliate with new group.25 2.2.5.4.2 Test case 2 - Radio denied affiliatio

34、n to new group.26 2.2.6 TEST SUITE: Announcement group call26 2.2.6.1 Description26 2.2.6.2 Expected behavior26 2.2.6.3 Initial conditions26 2.2.6.4 Procedure.27 2.2.6.4.1 Test case 1 - Collection of talk groups receive call27 2.2.7 TEST SUITE: Emergency alarm27 2.2.7.1 Description27 2.2.7.2 Expecte

35、d behavior28 2.2.7.3 Initial conditions28 2.2.7.4 Procedure.28 2.2.7.4.1 Test case 1 - Emergency alarm. 28 2.2.7.4.2 Test case 2 - Emergency alarm, invalid radio29 2.2.7.4.3 Test case 3 - Emergency alarm, temporarily valid radio29 2.2.8 TEST SUITE: Emergency Group call.30 TIA-102.CABC-B iv 2.2.8.1 D

36、escription30 2.2.8.2 Expected behavior.30 2.2.8.3 Initial conditions.30 2.2.8.4 Procedure31 2.2.8.4.1 Test case 1 - Emergency call.31 2.2.8.4.2 Test case 2 - Pre-programmed emergency call31 2.2.8.4.3 Test case 3 - Emergency call, invalid radio32 2.2.8.4.4 Test case 4 - Emergency call, temporarily va

37、lid radio.32 2.2.8.4.5 Test case 5 - Emergency call request queued .33 2.2.8.4.6 Test case 6 - Emergency call request ruthless preemption34 2.2.9 TEST SUITE: Emergency Unit-to-Unit call35 2.2.9.1 Description35 2.2.9.2 Expected behavior.35 2.2.9.3 Initial conditions.35 2.2.9.4 Procedure36 2.2.9.4.1 T

38、est case 1 - Unit-to-unit emergency call.36 2.2.10 TEST SUITE: Encryption36 2.2.10.1 Description36 2.2.10.2 Expected behavior.36 2.2.10.3 Initial conditions.36 2.2.10.4 Procedure37 2.2.10.4.1 Test case 1 - Call privacy for encrypted call.37 2.2.10.4.2 Test case 2 - Late entry for encrypted call37 2.

39、2.11 TEST SUITE: Roaming 37 2.2.11.1 Description37 2.2.11.2 Expected behavior.38 2.2.11.3 Initial conditions.38 2.2.11.4 Procedure38 2.2.11.4.1 Test case 1 - Idle radio.38 2.2.12 TEST SUITE: Authentication39 2.2.12.1 Description39 2.2.12.2 Expected Behavior 39 2.2.12.3 Initial Conditions39 2.2.12.4

40、Procedure39 2.2.12.4.1 Test case 1 - Authentication.39 2.2.12.4.2 Test case 2 - Authentication Failure.39 2.2.13 TEST SUITE: Deregistration.40 2.2.13.1 Description40 2.2.13.2 Expected Behavior 40 2.2.13.3 Initial Conditions40 2.2.13.4 Procedure40 2.2.13.4.1 Test case 1 - Deregistration.40 2.2.14 TES

41、T SUITE: System Call40 2.2.14.1 Description40 2.2.14.2 Expected Behavior 40 TIA 102.CABC-B v 2.2.14.3 Initial Conditions.40 2.2.14.4 Procedure.41 2.2.14.4.1 Test case 1 - System Call .41 2.2.15 TEST SUITE: Call Alert .42 2.2.15.1 Description42 2.2.15.2 Expected Behavior42 2.2.15.3 Initial Conditions

42、.42 2.2.15.4 Procedure.42 2.2.15.4.1 Test case 1 - Call Alert42 2.2.15.4.2 Test case 2 - Call Alert Denied43 2.2.16 TEST SUITE: Short Message43 2.2.16.1 Description43 2.2.16.2 Expected Behavior43 2.2.16.3 Initial Conditions.43 2.2.16.4 Procedure.43 2.2.16.4.1 Test case 1 - Short Message.43 2.2.16.4.

43、2 Test case 2 - Short Message Denied 44 2.2.16.4.3 Test case 3 - Short Message No Response44 2.2.17 TEST SUITE: Status Query.44 2.2.17.1 Description44 2.2.17.2 Expected Behavior44 2.2.17.3 Initial Conditions.44 2.2.17.4 Procedure.45 2.2.17.4.1 Test case 1 - Status Query45 2.2.18 TEST SUITE: Status U

44、pdate .45 2.2.18.1 Description45 2.2.18.2 Expected Behavior45 2.2.18.3 Initial Conditions.45 2.2.18.4 Procedure.45 2.2.18.4.1 Test case 1 - Status Update45 2.2.18.4.2 Test case 2 - Status Update Denied46 2.2.18.4.3 Test case 3 - Status Update No Response46 2.2.19 TEST SUITE: Radio Unit Monitoring46

45、2.2.19.1 Description46 2.2.19.2 Expected Behavior46 2.2.19.3 Initial Conditions.47 2.2.19.4 Procedure.47 2.2.19.4.1 Test case 1 - Radio Unit Monitor - Individual Non-Silent47 2.2.19.4.2 Test case 2 - Radio Unit Monitor - Individual Silent.47 2.2.19.4.3 Test case 3 - Radio Unit Monitor - Normal Group

46、 Non-Silent 48 2.2.19.4.4 Test case 4 - Radio Unit Monitor - Normal Group Silent48 2.2.19.4.5 Test case 5 - Radio Unit Monitor - Encrypted Group Silent48 2.2.19.4.6 Test case 5 - Radio Unit Monitor - Encrypted Group Non-Silent49 2.2.20 TEST SUITE: Radio Unit Disable/Re-enable.49 2.2.20.1 Description

47、49 TIA-102.CABC-B vi 2.2.20.2 Expected Behavior 49 2.2.20.3 Initial Conditions50 2.2.20.4 Procedure50 2.2.20.4.1 Test case 1 - Radio Unit Disable50 2.2.20.4.2 Test case 2 - Radio Unit Re-Enable.50 2.2.21 TEST SUITE: Radio Check51 2.2.21.1 Description51 2.2.21.2 Expected Behavior 51 2.2.21.3 Initial

48、Conditions51 2.2.21.4 Procedure51 2.2.21.4.1 Test case 1 - Radio Check Successful.51 2.2.21.4.2 Test case 2 - Radio Check Unsuccessful.51 2.2.22 TEST SUITE: Radio Detach.51 2.2.22.1 Description51 2.2.22.2 Expected Behavior 51 2.2.22.3 Initial Conditions52 2.2.22.4 Procedure52 2.2.22.4.1 Test case 1

49、- Radio Detach52 2.2.23 TEST SUITE: Unit-to-PSTN Telephone Interconnect Call.52 2.2.23.1 Description52 2.2.23.2 Expected Behavior 52 2.2.23.3 Initial Conditions52 2.2.23.4 Procedure52 2.2.23.4.1 Test case 1 - Unit-to-PSTN Telephone Interconnect52 2.2.23.4.2 Test case 2 - Unit-to-PSTN Telephone Interconnect Denied53 2.2.23.4.3 Test case 3 - Unit-to-PSTN Telephone Interconnect - Queued53 2.2.24 TEST SUITE: PSTN-to-Unit Telephone Interconnect Call.54 2.2.24.1 Description54 2.2.24.2 Expected Behavior 54 2.2.24.3 Initial Conditions54 2.2.24.4 Procedure54 2.2.24.4.1 Test case 1 - PSTN-to-Unit