SANS 60335-2-55-2009 Household and similar electrical appliances - Safety Part 2-55 Particular requirements for electrical appliances for use with aquariums and garden ponds《家用及类似用.pdf

《SANS 60335-2-55-2009 Household and similar electrical appliances - Safety Part 2-55 Particular requirements for electrical appliances for use with aquariums and garden ponds《家用及类似用.pdf》由会员分享，可在线阅读，更多相关《SANS 60335-2-55-2009 Household and similar electrical appliances - Safety Part 2-55 Particular requirements for electrical appliances for use with aquariums and garden ponds《家用及类似用.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22274-1 SANS 60335-2-55:2009Edition 3.1IEC 60335-2-55:2008Edition 3.1SOUTH AFRICAN NATIONAL STANDARD Household and similar electrical appl

4、iances Safety Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds This national standard is the identical implementation of IEC 60335-2-55:2008 and is adopted with the permission of the International Electrotechnical Commission. WARNING Can only be us

5、ed in conjunction with SANS 60335-1. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS

6、.SANS 60335-2-55:2009 Edition 3.1 IEC 60335-2-55:2008 Edition 3.1 Table of changes Change No. Date Scope IEC amdt 1 2008 Amended to include the effect of electromagnetic phenomena on appliances, to amend the scope with regards to challenged persons and children, to add a requirement under mechanical

7、 strength, and to add a referenced standard to the bibliography.National foreword This South African standard was approved by National Committee SABS TC 72, Safety of electrical appliances and electronic equipment, in accordance with procedures of the SABS Standards Division, in compliance with anne

8、x 3 of the WTO/TBT agreement. This SANS document, by reference, forms part of the Compulsory specification for electrical and electronic apparatus, as published by Government Notice No. R. 1079 (Government Gazette 25245) of 1 August 2003. This SANS document was published in March 2009. This SANS doc

9、ument supersedes SANS 60335-2-55:2003 (edition 3). This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .IEC 60335-2-55Edition 3.1 2008-07INTERNATIONAL STANDARD NORME INTERNATIONALEHousehold and similar electrical appliances Safety Part 2-55: Parti

10、cular requirements for electrical appliances for use with aquariums and garden ponds Appareils lectrodomestiques et analogues Scurit Partie 2-55: Rgles particulires pour les appareils lectriques utiliser avec les aquariums et les bassins de jardin INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION

11、 ELECTROTECHNIQUE INTERNATIONALE CCICS 97.020 PRICE CODECODE PRIXISBN 2-8318-9758-0 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale SANS 60335-2-55:2009This s tandard may only be used and printed by approved subscrip

12、tion and freemailing clients of the SABS . 2 60335-2-55 IEC:2002+A1:2008 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Definitions 7 4 General requirement.7 5 General conditions for the tests 7 6 Classification7 7 Marking and instructions.8 8 Protection against access to l

13、ive parts8 9 Starting of motor-operated appliances 9 10 Power input and current .9 11 Heating 9 12 Void9 13 Leakage current and electric strength at operating temperature9 14 Transient overvoltages .9 15 Moisture resistance 9 16 Leakage current and electric strength.10 17 Overload protection of tran

14、sformers and associated circuits .10 18 Endurance10 19 Abnormal operation 10 20 Stability and mechanical hazards .10 21 Mechanical strength .10 22 Construction.11 23 Internal wiring.12 24 Components .12 25 Supply connection and external flexible cords 12 26 Terminals for external conductors.12 27 Pr

15、ovision for earthing .12 28 Screws and connections.12 29 Clearances, creepage distances and solid insulation 12 30 Resistance to heat and fire.13 31 Resistance to rusting13 32 Radiation, toxicity and similar hazards13 Annexes .14 Bibliography14 SANS 60335-2-55:2009This s tandard may only be used and

16、 printed by approved subscription and freemailing clients of the SABS .60335-2-55 IEC:2002+A1:2008 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds FOR

17、EWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the el

18、ectrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to t

19、echnical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Or

20、ganization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each techni

21、cal committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Public

22、ations is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their natio

23、nal and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be

24、 in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committe

25、es for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to th

26、e Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held

27、 responsible for identifying any or all such patent rights. This part of International Standard IEC 60335 has been prepared by IEC technical committee 61: Safety of household and similar electrical appliances. This consolidated version of IEC 60335-2-55 consists of the third edition (2002) documents

28、 61/2222/FDIS and 61/2297/RVD and its amendment 1 (2008) documents 61/3547/FDIS and 61/3601/RVD. The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. It bears the edition number 3.1. A vertical line in the margin shows where t

29、he base publication has been modified by amendment 1. SANS 60335-2-55:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 4 60335-2-55 IEC:2002+A1:2008 The French version of this standard has not been voted upon. This part 2 is to be used in

30、 conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of the fourth edition (2001) of that standard. NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1. This part 2 supplements or modifies the corresponding clauses in IEC 60

31、335-1, so as to convert that publication into the IEC standard: Safety requirements for electrical appliances for use with aquariums and garden ponds. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “add

32、ition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly. NOTE 2 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; unless notes are in a new subclause or involve notes

33、 in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc. NOTE 3 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in t

34、he text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. The following differences exist in the countries indicated below. 3.1.9: Normal operation is different (USA); 6.1: Class 0I appliances are allowed (Japan); 7.12.1: Additi

35、onal instructions are required (USA); Clause 21: The tests are different (USA); 25.7: Ordinary polyvinyl chloride sheathed cords are allowed (Australia and New Zealand). The committee has decided that the contents of the base publication and its amendments will remain unchanged until the maintenance

36、 result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. NOTE 4 The attention of National Committees is drawn to the fact that equ

37、ipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of

38、the committee that the content of the amendment 1 be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. SANS 60335-2-55:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60

39、335-2-55 IEC:2002+A1:2008 5 INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards

40、such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affec

41、t the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope

42、of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. When a part 2 standard does not include

43、additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general req

44、uirements. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration

45、 when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards.

46、 An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing ma

47、terials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. SANS 60335-2-55:2009This s ta

48、ndard may only be used and printed by approved subscription and freemailing clients of the SABS . 6 60335-2-55 IEC:2002+A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds 1 Scope This clause

49、of Part 1 is replaced by the following. This International Standard deals with the safety of electric appliances for use with aquariums and garden ponds for household and similar purposes, their rated voltage being not more than 250 V. NOTE 101 Examples of appliances within the scope of this standard are aerators; aquarium heaters; automatic food dispensers; sludge-suction appliances. Appliances not intended for normal household use but that nevertheless may be a source of dange