SANS 2374-2008 Lifting appliances - Range of maximum capacities for basic models《起重机械 基本模式的最大能力范围》.pdf
《SANS 2374-2008 Lifting appliances - Range of maximum capacities for basic models《起重机械 基本模式的最大能力范围》.pdf》由会员分享,可在线阅读,更多相关《SANS 2374-2008 Lifting appliances - Range of maximum capacities for basic models《起重机械 基本模式的最大能力范围》.pdf(6页珍藏版)》请在麦多课文档分享上搜索。
1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-20898-1 SANS 2374:2008Edition 1ISO 2374:1983Edition 1SOUTH AFRICAN NATIONAL STANDARD Lifting appliances Range of maximum capacities for ba
4、sic models This national standard is the identical implementation of ISO 2374:1983 and is adopted with the permission of the International Organization for Standardization. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344
5、1568 international code +27 12 www.stansa.co.za Standards South Africa SANS 2374:2008 Edition 1 ISO 2374:1983 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee StanSA TC 5120.59, Cranes, in accordance with procedures of
6、Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in January 2008. Gi - International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWMEIKAYHAPOL1HAR OPTAHM3AUHR fl0 CTAHAPTl43ALWlORGANISATION INTERNATIONALE DE NORMALISATION Lifting
7、 appliances - Range of maximum capacities for basic models Appareils de levage - Gamme des charges nominales pour les modeles de base First edition - 1983-11-15 UDC 621.873/.877 : 62-18 Ref. No. ISO 2374-1983 (EI Descriptors : Iifting equipment, cranes (hoists), ratings, nominal capacity. 0 E Price
8、based on 1 page SANS 2374:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bedies). The work of developing
9、 International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with I
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- SANS23742008LIFTINGAPPLIANCESRANGEOFMAXIMUMCAPACITIESFORBASICMODELS 起重机械 基本 模式 最大 能力 范围 PDF

链接地址:http://www.mydoc123.com/p-1030149.html