SAE J 1113-1-2013 Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles Boats (up to 15 m) and Machines (Except Aircraft) (16 6 Hz to 18 GHz).pdf

《SAE J 1113-1-2013 Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles Boats (up to 15 m) and Machines (Except Aircraft) (16 6 Hz to 18 GHz).pdf》由会员分享，可在线阅读，更多相关《SAE J 1113-1-2013 Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles Boats (up to 15 m) and Machines (Except Aircraft) (16 6 Hz to 18 GHz).pdf（37页珍藏版）》请在麦多课文档分享上搜索。

1、 _ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising ther

2、efrom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2013 SAE International All rights reserved. No part of this

3、publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-49

4、70 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/J1113/1_201310 SURFACE VEHICLE STANDARD J1113-1 OCT2013 Issued 1995-07 Revised 2

5、013-10 Superseding J1113-1 MAR2012 Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (16.6 Hz to 18 GHz) RATIONALE This standard is being revised to adopt by reference ISO 11452-2, ISO 11452-3, ISO 11452-7,

6、ISO 11452-8, ISO 11452-10, ISO 11452-11, ISO 11452-2 and the emissions portion of ISO 7637-2 in place of SAE J1113-24, SAE J1113-3, SAE J1113-22, SAE J1113-2, SAE J1113-28, SAE J1113-21 and SAE J1113-42 respectively, which are cancelled; Appendix A was modified to be in line with the current SAE J18

7、12. Other technical and editorial changes were also made FOREWORD This SAE Standard brings together methodology for testing the electromagnetic emissions and immunity characteristics of vehicular modules and components. The writers of this series of documents have participated extensively in the dra

8、fting of ISO TC 22 Subcommittee 3 and CISPR Subcommittee D documents. By intent, the methods and limits of this document closely resemble the counterpart international standards. SAE J1113-1 General and Definitions SAE J1113-2 Withdrawn as a complete standard. Reserved for use as an exception docume

9、nt for SAE differences from ISO 11452-10. SAE J1113-3 Withdrawn as a complete standard. Reserved for use as an exception document for SAE differences from ISO 11452-7. SAE J1113-4 Conducted Immunity-Bulk Current Injection (BCI) Method Parts 5 through 10 reserved for future use SAE J1113-11 Immunity

10、to Conducted Transients on Power Leads SAE J1113-12 Electrical Interference by Conduction and Coupling - Coupling Clamp SAE J1113-13 Immunity to Electrostatic Discharge Parts 14 through 20 reserved for future use SAEJ1113-21 Road Vehicles - Electrical Disturbances by Narrowband Radiated Electromagne

11、tic Energy - Component Test Method - Absorber Lined Chamber Withdrawn as a complete standard. Reserved for use as an exception document for SAE differences from ISO 11452-2 SAE J1113-22 Withdrawn as a complete standard. Reserved for use as an exception document for SAE differences from ISO 11452-8.

12、SAE J1113-23 Withdrawn SAE J1113-24 Withdrawn as a complete standard. Reserved for use as an exception document for SAE differences from ISO 11452-3. SAE INTERNATIONAL J1113-1 Revised OCT2013 Page 2 of 37 SAE J1113-25 Withdrawn SAE J1113-26 Immunity to AC Power Line Electric Fields SAE J1113-27 Immu

13、nity to Radiated Electromagnetic Fields - Mode Stir Reverberation Method SAE J1113-28 Withdrawn as a complete standard. Reserved for use as an exception document for SAE differences from ISO 11452-11. Parts 29 through 40 reserved for future use SAE J1113-41 - Withdrawn as a complete standard. Reserv

14、ed for use as an exception document for SAE differences from IEC CISPR 25. SAE J1113-42 - Withdrawn as a complete standard. Reserved for use as an exception document for SAE differences from the emissions portion of ISO 7637-2. 1. SCOPE This SAE Standard covers the measurement of voltage transient i

15、mmunity and within the applicable frequency ranges, audio (AF) and radio frequency (RF) immunity, and conducted and radiated emissions. By reference, ISO 11452-3, ISO 11452-7, ISO 11452-8, ISO 11452-10, ISO 11452-11, ISO 11452-2 and the emissions portion of ISO 7637-2 are adopted in place of SAE J11

16、13-24, SAE J1113-3 , SAE J1113-22, SAE J1113-2, SAE J1113-28, SAE J1113-21 and SAE J1113-42, respectively. In the event that an amendment is made or a new edition is published, the new ISO document shall become part of this standard six months after the publication of the ISO document. SAE reserves

17、the right to identify exceptions to the published ISO document with the exceptions to be documented in SAE J1113-24, SAE J1113-3, SAE J1113-22, SAE J1113-2, SAE J1113-28, SAE J1113-21 and SAE J1113-42 respectively. By reference, IEC CISPR 25 is adopted as the standard for the measurement of componen

18、t emissions. In the event that an amendment is made or a new edition is published, the new IEC document shall become part of this standard six months after the publication of the IEC document. SAE reserves the right to identify exceptions to the published IEC document with the exceptions to be docum

19、ented in SAE J1113-41. Emissions from intentional radiators are not controlled by this document. (See applicable appropriate regulatory documents.) The immunity of commercial mains powered equipment to over voltages and line transients is not covered by this document. 2. REFERENCES The following pub

20、lications form a part of this specification to the extent specified herein. Unless otherwise indicated, the latest issue of SAE publications shall apply. 2.1 Applicable Documents 2.1.1 SAE Publications Available from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel: 877-606-

21、7323 (inside USA and Canada) or 724-776-4970 (outside USA), www.sae.org SAE J1113-2 Withdrawn as a complete standard. Reserved for use as an exception document for SAE differences from ISO 11452-10 SAE J1113-3 Withdrawn as a complete standard. Reserved for use as an exception document for SAE differ

22、ences from ISO 11452-4 SAE J1113-4 Immunity to Radiated Electromagnetic Fields - Bulk Current Injection (BCI) Method SAE J1113-11 Immunity to Conducted Transients on Power Leads SAE J1113-12 Electrical Interference by Conduction and Coupling - Capacitive and Inductive Coupling via Lines Other than S

23、upply Lines SAE INTERNATIONAL J1113-1 Revised OCT2013 Page 3 of 37 SAE J1113-13 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13: Immunity to Electrostatic Discharge SAE J1113-21 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 21:

24、 Immunity to Electromagnetic Fields, 30 MHz to 18 GHz, Absorber-Lined Chamber Withdrawn as a complete standard. Reserved for use as an exception document for SAE differences from ISO 11452-2 SAE J1113-22 Withdrawn as a complete standard. Reserved for use as an exception document for SAE differences

25、from ISO 11452-8 SAE J1113-24 Withdrawn as a complete standard. Reserved for use as an exception document for SAE differences from ISO 11452-3 SAE J1113-26 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to AC Power Line Electric Fields SAE J1113-27 Electromagne

26、tic Compatibility Measurements Procedure for Vehicle Components - Part 27 - Immunity to Radiated Electromagnetic Fields - Reverberation Method SAE J1113-28 Withdrawn as a complete standard. Reserved for use as an exception document for SAE differences from ISO 11452-11 SAE J1113-41 Withdrawn as a co

27、mplete standard. Reserved for use as an exception document for SAE differences from IEC CISPR 25. SAE J1113-42 Withdrawn as a complete standard. Reserved for use as an exception document for SAE differences from the emissions portion of ISO 7637-2. SAE J1812 Function Performance Status Classificatio

28、n for EMC Immunity Testing 2.1.2 IEEE Publications Available from IEEE, 445 Hoes Lane, Piscataway, NJ 08854-1331, Tel: 732-981-0060, www.ieee.org. ANSI/IEEE STD 100 Standard Dictionary of Electrical and Electronic Terms IEEE C63.2 Electromagnetic Noise and Field Strength Instrumentation, 10 kHz to 4

29、0 GHz Specifications IEEE C63.4 American National Standard for Methods of Measurement of Radio-Noise Emissions from LowVoltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz IEEE C95.1 IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagne

30、tic Fields, 3 kHz to 300 GHz - Description 2.1.3 IEC Publications Available from American National Standards Institute, 25 West 43rd Street, New York, NY 10036-8002, Tel: 212-642-4900, www.ansi.org. CISPR 25 Third Edition 2008-03, Vehicles, boats and internal combustion engines -Radio disturbance ch

31、aracteristics - Limits and methods of measurement for the protection of on-board receivers IEC Publication 60050-161 International Electrotechnical Vocabulary - Electromagnetic Compatibility IEC Publication 60050-726 International Electrotechnical Vocabulary - Transmission Lines and Waveguides SAE I

32、NTERNATIONAL J1113-1 Revised OCT2013 Page 4 of 37 2.1.4 ISO Publications Available from American National Standards Institute, 25 West 43rd Street, New York, NY 10036-8002, Tel: 212-642-4900, www.ansi.org. ISO 7637-1 Road vehicles - Electrical interference by conduction and coupling: Part 1 - Defini

33、tions and general ISO 7637-2 Road vehicles - Electrical interference by conduction and coupling: Part 2 - Vehicles with nominal 12 V or 24 V supply voltage - Electrical transient conduction along supply lines only ISO 7637-3 Road vehicles - Electrical disturbance by conduction and coupling: Part 3Ve

34、hicles with nominal 12 V or 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines. ISO 10605 Road vehicles - Electrical disturbances from electrostatic discharges ISO 11452-1 Road vehicles - Component test methods for electrica

35、l disturbances from narrowband radiated electromagnetic energy - Part 1: General and definitions ISO 11452-2 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined chamber ISO 11452-3 Road vehicles - Component test

36、methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: Transverse electromagnetic mode (TEM) cell ISO 11452-4 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BC

37、I) ISO 11452-5 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 5: Stripline ISO 11452-7 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7: Direct radio

38、frequency (RF) power injection ISO 11452-8 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields ISO 11452-10 Road vehicles - Component test methods for electrical disturbances from narrowband radiated

39、 electromagnetic energy - Part 10 Immunity to conducted disturbances in the extended audio frequency range ISO 11452-11 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 11 Reverberation chamber SAE INTERNATIONAL J1113-1 Revised

40、 OCT2013 Page 5 of 37 2.2 Related Publications The following publications are provided for information purposes only and are not a required part of this SAE Technical Report. 2.2.1 SAE Publication Available from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel: 877-606-7323

41、(inside USA and Canada) or 724-776-4970 (outside USA), www.sae.org. SAE HS-3600 Surface Vehicle Electromagnetic Compatibility (EMC) Standards Manual 2.2.2 ANSI Publications Available from American National Standards Institute, 25 West 43rd Street, New York, NY 10036-8002, Tel: 212-642-4900, www.ansi

42、.org. ANSI C63.5 American National Standard for Electromagnetic Compatibility - Radiated Emissions Measurements in Electromagnetic Interference (EMI) Control - Calibration of Antennas (9 kHz to 40 GHz) ANSI C63.14 American National Standard Dictionary for Technologies of Electromagnetic Compatibilit

43、y (EMC), Electromagnetic Pulse (EMP), and Electrostatic Discharge (ESD) (Dictionary of EMC/EMP/ESD Terms and Definitions) ANSI C63.16 Methodologies and Criteria for Electronic Equipment 2.2.3 CISPR Publication Available from American National Standards Institute, 25 West 43rd Street, New York, NY 10

44、036-8002, Tel: 212-642-4900, www.ansi.org. CISPR 22 Limits and methods of measurement of radio interference characteristics of information technology equipment 2.2.4 ISO Publication Available from American National Standards Institute, 25 West 43rd Street, New York, NY 10036-8002, Tel: 212-642-4900,

45、 www.ansi.org. ISO TR 10305 Generation of standard em fields for calibration of power density meters - 20 kHz to 1000 MHz DISISO 11452-9 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9 Portable transmitters 2.2.5 IEEE Public

46、ations Available from IEEE, 445 Hoes Lane, Piscataway, NJ 08854-1331, Tel: 732-981-0060, www.ieee.org. IEEE C63.5 American National Standard for Electromagnetic Compatibility - Radiated Emissions Measurements in Electromagnetic Interference (EMI) Control - Calibration of Antennas (9 kHz to 40 GHz) I

47、EEE C63.14 American National Standard Dictionary for Technologies of Electromagnetic Compatibility (EMC), Electromagnetic Pulse (EMP), and Electrostatic Discharge (ESD) (Dictionary of EMC/EMP/ESD Terms and Definitions) IEEE C63.16 Methodologies and Criteria for Electronic Equipment SAE INTERNATIONAL

48、 J1113-1 Revised OCT2013 Page 6 of 37 IEEE STD 211 IEEE Standard Definition of Terms for Radio Wave Propagation IEEE STD 291 IEEE Standard Methods for Measuring Electromagnetic Field Strength of Sinusoidal Continuous Waves, 30 Hz to 30 GHz 2.2.6 Other Publications SAE paper 810333, “Implementation o

49、f EMC Testing of Automotive Vehicles,” Kinderman, J.C., et al., February 1981 SAE paper 831011, “An Indoor 60 Hz to 40 GHz Facility for Total Vehicle EMC Testing,” Vrooman, June 1983 Adams, J. W., Taggart, H. E., Kanda, M., and Shafer, J., “Electromagnetic Interference (EMI) Radiative Measurements for Automotive Applications,” NBS Tech. Note 1014, June 1979 Tippet, J. C., Chang, D. C., and Crawford, M.