SAE AMS 3906 2B-1992 Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated for Hand and Machine Layup GL-III-36 - 120 (248)《手工和机器铺叠用环氧树脂浸渍的玻璃非机织纤维带和平板GL-III-36-120(250).pdf
《SAE AMS 3906 2B-1992 Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated for Hand and Machine Layup GL-III-36 - 120 (248)《手工和机器铺叠用环氧树脂浸渍的玻璃非机织纤维带和平板GL-III-36-120(250).pdf》由会员分享,可在线阅读,更多相关《SAE AMS 3906 2B-1992 Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated for Hand and Machine Layup GL-III-36 - 120 (248)《手工和机器铺叠用环氧树脂浸渍的玻璃非机织纤维带和平板GL-III-36-120(250).pdf(7页珍藏版)》请在麦多课文档分享上搜索。
1、SAE-AMS3906/2ADOPTION NOTICESAE-AMS3906/2, “GLASS NON-WOVEN FIBER TAPE AND FLAT SHEET EPOXYRESIN IMPREGNATED, FOR HAND AND MACHINE LAYUP GL-III-36 -120(248)“, was adopted on 01-JUL-92 for use by the Department ofDefense (DoD). Proposed changes by DoD activities must besubmitted to the DoD Adopting A
2、ctivity: Commander, Naval AirWarfare Center, Aircraft Division, Code 414100B120-3, Highway547, Lakehurst, NJ 08733-5100. Copies of this document may bepurchased from the Society of Automotive Engineers 400Commonwealth Drive Warrendale, Pennsylvania, United States,15096-0001. http:/www.sae.org/_Custo
3、dians: Adopting Activity:Navy - ASArmy - MRNavy - ASReviewer Activities:DLA - GSAREA CMPSDISTRIBUTION STATEMENT A: Approved for public release; distributionis unlimited.Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without lic
4、ense from IHS-,-SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and enginee ring sciences. The use of this report is entirelyvoluntary, and its applicability and suitability for any particular use, including any patent infringement
5、 arising therefrom, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invit es your written comments and suggestions.Copyright 1997 Society of Automotive Engineers, Inc.All rights reserve
6、d. Printed in U.S.A.QUESTIONS REGARDING THIS DOCUMENT: (412) 772-7154 FAX: (412) 776-0243TO PLACE A DOCUMENT ORDER: (412) 776-4970 FAX: (412) 776-0790400 Commonwealth Drive, Warrendale, PA 15096-0001AEROS PACE MATERIAL SPECIFIC ATIONSubmitted for recognition as an American National StandardAMS 3906/
7、2BIssued JUN 1975Revised JUL 1992Reaffirmed OCT 1997Superseding AMS 3906/2AGlass Non-Woven Fiber T ape and Flat SheetEpoxy Resin Impregnated, For Hand and Machine LayupGL-III-36 - 120 (248)1. SCOPE:1.1 Form: This specification covers one type of epoxy-resin-impregnated, non-woven, glass fiber in the
8、 form of tape for hand or machine layup and of flat sheet.1.2 Application: These products have been used typically in structural composites requiring high strength up to 120 C (248 F), but usage is not limited to such applications.1.3 Classification: GL-III-36 - 120 (248), non-woven “S” glass fiber
9、impregnated with epoxy resin for service from -55 to +120 C (-67 to +248 F).2. APPLICABLE DOCUMENTS: See AMS 3906.3. TECHNICAL REQUIREMENTS: 3.1 Basic Specification: The complete requirements for procuring the product described herein shall consist of this document and the latest issue of the basic
10、specification, AMS 3906.Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-AMS 3906/2B SAE AMS 3906/2B- 2 -3.2 Product: Shall be a non-woven, high tensile strength, “S” glass fiber meeting the requirement
11、s of MIL-R-60346, Type III, impregnated with epoxy resin formulated to meet the requirements specified herein.3.3 Properties of Uncured Product: Shall be as shown in Table 1, 3.3.6, and 3.3.7. Tests shall be performed on the product as-received, after warming to above the dew point prior to sampling
12、.3.3.6 Total weight per unit area, determined in accordance with 4.5.3 of AMS 3906, shall be as ordered; available levels are shown below.259 grams/square yard 19 (310 g/m 2 23)282 grams/square yard 23 (337 g/m 2 28)386 grams/square yard 28 (462 g/m 2 33)3.3.7 Ply thickness, uncured, determined in a
13、ccordance with 4.5.4 of AMS 3906, shall be as ordered; available levels are shown below.0.006 inch 0.002 (0.15 mm 0.05)0.007 inch 0.002 (0.18 mm 0.05)0.011 inch 0.003 (0.28 mm 0.08)TABLE 1 - PropertiesParagraph Property Requirement Test Method3.3.1 Volatile Content byweight, maximum2% ASTM D 3530165
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- SAEAMS39062B1992GLASSNONWOVENFIBERTAPEANDFLATSHEETEPOXYRESINIMPREGNATEDFORHANDANDMACHINELAYUPGLIII36120248

链接地址:http://www.mydoc123.com/p-1021281.html