PIA-TS-120 2 01-1995 AAD Design and Testing Report Format《AAD设计及试验用报表格式》.pdf

《PIA-TS-120 2 01-1995 AAD Design and Testing Report Format《AAD设计及试验用报表格式》.pdf》由会员分享，可在线阅读，更多相关《PIA-TS-120 2 01-1995 AAD Design and Testing Report Format《AAD设计及试验用报表格式》.pdf（13页珍藏版）》请在麦多课文档分享上搜索。

1、Parachute Industry Association Publications PIA Technical Standard 120 2.01 AAD Design and Testing Report Format September 20,1995 TS-120 2.01 Table of Contents 1 . 2 . 3 . 3.1. 3.2. 3.3. 3.4. 3.5. 4 . 4.1. 4.2. 4.3. 4.4. 4.4.1. 4.4.2. 4.4.3. 4.5. 4.5.1. 4.5.2. 4.5.3. 4.5.4. 4.5.5. 4.5.6. 4.5.7. 4.5

2、.8 Objective 4 Reference documents 4 Design description . 5 Specific usage modes of the device . 5 Principle of operation . 5 Technical data . 5 Limitations 6 of system or sub system failures . 6 Preventive means of the device to minimize the affection Testing . 6 General overview of the testing pro

3、gram . 6 Altitude measurement subsystem . 7 Release subsystem . 7 Complete system test 7 Installation and function 7 Drop tests 8 Live jumps 8 Environmental testing 8 Shock . 8 Vibration . 9 Humidity . 9 Salt 9 Temperature . 10 Software 10 EM1 / EMS / ESD . 11 Aging test 11 4.5.9. Other . 11 PIA Tec

4、hnical Standard 120 2.01 . AAD Design and Testing Report Format September 20. 1995 5 . Human Interface . 11 5.1. Arm / Disarm 11 5.2. User calibration 11 5.3. Parameter changes 12 6 . Marking / Labeling 12 7 . Documentation . 12 8 . Maintenance 12 8.1. Field maintenance . 12 8.2. Manufacturer mainte

5、nance 12 8.3. Service stations . 13 9 . 9.1. Purchased parts / components 13 9.2. Production . 13 9.3. Final testing 13 9.4. In the field . 13 Quality Control Procedures/Systems and Methodology 13 10 . Additional remarks . 13 PIA Technical Standard 120 2.01 . AAD Design and Testing Report Format Sep

6、tember 20. 1995 1. Objective The PIA AAD Design & Testing Report Format is regarded as fulfilled when the manufacturer releases the following test report about his product. The test report will be published by the PIA in the “Para NewsBrief“, and on the PIA Internet Web Site so that the public has a

7、ccess to it. With the following report procedure, every manufacturer has their own choice to define the extent and kind of requirements concerning their particular unit. The requirement regarding quality of each product results from the self-defined test requirements. Each manufacturer is free to de

8、cide which of the actual tests and quality control parameters they want to use in the published test report. The self-chosen quality requirements should be documented. The form of the description should follow a general format. In each section, the manufacturer should describe: - the goal of the tes

9、t, e.g. recognizing of the correct activation altitude, checking of - how many units have been utilized to perform the test in question - the test arrangement correct function under elevated temperatures, etc. - what has been measuredtested? - how has it been measuredtested? - what test equipment ha

10、s been utilized? Each test report shall contain references to all sections, even if they are “not recommended”. All sections should be listed even when no data is presented. In this case a statement such as “not applicable”, “not recommended”, “not appropriate”, “not valid”, or “no statement on this

11、 point” should be included. In the event there is no reference to any particular section, the Para NewsBrief Editor will include the missing section with the notation “no statement supplied by the manufacturer” prior to publishing the report. 2. Reference documents MIL-STD- 8 1 OE MIL-STD-45662A Cal

12、ibration System Requirements RTCA/DO- 160C MIL-STD-331B RTCA/DO- 178B Environmental Test Methods Environmental Conditions and Test Procedures Procedure C1 for Temp. & Humidity Test Software considerations in Airborne Systems and Equipment Certifications Requirements of the Control of Electromagnetic

13、 Interference, Emissions and Susceptibility MIL-STD-46 1D PIA Technical Standard 120 2.01 - AAD Design and Testing Report Format September 20, 1995 3. 3.1. 3.2. 3.3. 3.4. Design description Specific usage modes of the device (recommended) a description for what purposes the device is suitable (or no

14、t suitable) e.g. is the unit designed for a particular usage, mode of operation, or user-type group (student, tandem, military, etc.) Principle of operation (recommended) a description of how the unit comes to the decision to activate and how the life saving device is activated (in the case of a mai

15、n or reserve parachute, by what means is the parachute activated?) Technical data (recommended) Complete technical description including (but not limited to): - list of components or subsystems - dimensions - weight - volume - storage conditions - operating conditions (temp / relative humidity) - li

16、fe time of consumptive components (batteries, sensors, filters, springs, antenna, - activation parameters - accuracy - reliability (statistical value) - service interval etc.) Limitations (recommended if appropriate) examples: - if the unit is not suitable for certain parachuting activities - if the

17、 unit is only suitable for specific operations - if unusual basic operating conditions are required Typical questions which may arise here: - Can the unit be used when take-ofSand landing sites are at difSerent locations or PIA Technical Standard 120 2.01 - AAD Design and Testing Report Format Septe

18、mber 20, 1995 altitudes? - Can it be used for high altitude jumps? - Can it be used for water jumps (salt / fresh water)? - Can it be used when flying in pressurized aircraft? - Can it be used at extreme speeds? 3.5. Preventive means of the device to minimize the affection of system or sub system fa

19、ilures (optional) - means taken to recognize the failure of the whole system - means taken to recognize the failure of a sub-systems - is there an indicator for a failure? - how are these precautions adequate to prevent a misfiring? 4. Testing 4.1. General overview of the testing program (recommende

20、d) Clear description of the testing system, goals, results, and after action. Note: this section is very important. From the information given here conclusions can be derived concerning the probability of various problem areas in - design - development - test - production - usage It should be made c

21、lear that problems are recognized and that solutions lead to results. The exact details of specijic solutions need not necessarily be explained, as often this is the proprietary knowledge of the particular manufacturer. PIA Technical Standard 120 2.01 - AAD Design and Testing Report Format September

22、 20, 1995 4.2. Altitude measurement subsystem (recommended) which procedure is utilized to establish altitude: - freefall time - air pressure (barometric) - air pressure (dynamic) - gyroscopic navigation - radio altimetric - other which physical tests have been performed to check the function of thi

23、s subsystem? what is the functional principle of the measurement apparatus? which data basis has been used for the functional testing and/or simulation? 4.3. Release subsystem (if appropriate) This section needs to be completed if a main or reserve parachute is used for the life saving action and th

24、erefore have to be released. The principle of operation of the subsystem should be described here with the specific requirements of the tests. If a completely independent system for the saving action is used, “not applicable ” should be used here. Include if applicable: Required force of the activat

25、ion sub system? (i.e. spring pull: what force has to be achieved?) Are any special materials necessary such as loops, special closing pins, etc. ? 4.4. Complete system test 4.4.1. Installation and function (recommended) Description of how the basic installation in /on a parachute container is perfor

26、med. What has been checked to verify proper integration and interaction of the parachute system and the AAD system? What has been done to avoid interference with the other portions and material of the parachute system? What particular instructions to users and riggers have resulted from this? Are an

27、y specific materials or tools required, or is there a special “installation service station“? PIA Technical Standard 120 2.01 - AAD Design and Testing Report Format September 20, 1995 4.4.2. Drop tests (optional) How many jumps with how many diflerent units, under which conditions, with which goals

28、have been performed? Results could be presented in a simple form (judgment of good, satisfactory, etc.) or in a more extensive form (tables with measurement results, etc.). Questions which could be answered by a reasonable number of drop tests are: - how does the system cope with unstable freefall?

29、- how does the system react to a cutaway? - how does the system react to diflerent freefall velocities? - how does this system react to various stable freefall positions? 4.4.3. Live jumps (optional) How many live jumps with how many diflerent units, under which conditions, with which goals have bee

30、n performed? Results could be presented in a simple format (judgment of good, satisfactory, etc.) or in a more extensive form (tables with measurement results, etc.). Questions which could arise here are: - is the tests series comprehensive enough? - were extreme climatic conditions considered? e.g.

31、 how does the system react - to strong thunderstorms? - to high humidity? - to high / low temperatures? 4.5. Environmental testing 4.5.1. Shock (recommended) Refer to the comprehensive procedures in: MIL-STD-81 OE RTCMDO-16OC It is highly desirable that the tests are performed in accordance with the

32、se or similar procedures The report should include a description of the procedures and the results. Environmental Test Methods, Method 516.4 Environmental Conditions and Test Procedures, Section 7 PIA Technical Standard 120 2.01 - AAD Design and Testing Report Format September 20, 1995 4.5.2. Vibrat

33、ion (recommended) Refer to the comprehensive procedures in: MIL-STD-81 OE RTCMDO-160C It is highly desirable that the tests are performed in accordance with these or similar procedures The report should include a description of the procedures and the results. Environmental Test Methods, Method 514.4

34、 Environmental Conditions and Test Procedures, Section 8 4.5.3. Humidity (recommended if appropriate) Note: if in section 3.3 specific humidity rangers are not excluded, some consideration should be given here in regard to condensing /not condensing, rain, submersion, etc. Refer to the comprehensive

35、 procedures in: MIL-STD-81 OE Environmental Test Methods, Method 507.3, 508.4, 506.3, 520.1 Environmental Conditions and Test Procedures, Section 6, 1 O, 24 Procedure CI for Temp. & Humidity Test RTCMDO-160C MIL-STD-331 B It is highly desirable that the tests are performed in accordance with these o

36、r similar procedures The report should include a description of the procedures and the results. 4.5.4. Salt (recommended if appropriate) Refer to the comprehensive procedures in: MIL-STD-81 OE RTCMDO-160C MIL-STD-331 B Environmental Test Methods, Method 509.3 Environmental Conditions and Test Proced

37、ures, Section 14, 24 Procedure CI for Temp. & Humidity Test It is highly desirable that the tests are performed in accordance with these or similar procedures The report should include a description of the procedures and the results. PIA Technical Standard 120 2.01 - AAD Design and Testing Report Fo

38、rmat September 20, 1995 4.5.5. Temperature (recommended) Testing should be performed at least in the range which is defined in section 3.3. as allowed Refer to the comprehensive procedures in: MIL-STD-81 OE RTCMDO-160C It is highly desirable that the tests are performed in accordance with these or s

39、imilar procedures It is important to know ifa classification according RTCMDO-16OC had been made The report should include a description of the procedures and the results Environmental Test Methods, Method 501.3 . 503.3, 520.1 Environmental Conditions and Test Procedures, Section 4, 5, 24 4.5.6. Sof

40、tware (recommended if appropriate) Corresponding portions of RTCMDO 178B In which sojhvare level (A . E) has the software been classified Description of the quality control methodology used in - software design (RTCMDO 178B, chapter 4.1 . 4.6) - software programming (RTCMDO 178B, chapter 5.1 . 5.5)

41、- software testing (RTCMDO 178B, chapter 6.1 . 6.4) - software documentation - software validation (RTCMDO 178B, chapter 9.1 . 9.4) - software controls during production phase (RTCADO 178B, chapter 7.1 . 7.3) - software design change testing and validation (RTCMDO 178B, chapter 11.1 . 11.20) to achi

42、eve the desired quality level 4.5.7. EM1 I EMS I ESD (recommended if appropriate) corresponding portions of MIL-STD-461D and RTCMDO-16OC, section 15 and 19 . 22) With electronic units it should be assumed that the electromagnetic environment is extremely aggressive. At the same time consideration sh

43、ould be made to possible interference with airborne avionics. In particular, the points to be considered are: - passive susceptibility (radiated, conducted, electrostatic) PIA Technical Standard 120 2.01 - AAD Design and Testing Report Format September 20, 1995 4.5.8 4.5.9. 5. 5.1. 5.2. 5.3. - activ

44、e radiation Which portions of the spectrum at what power levels have been tested? Which frequencies in particular have been tested separately? - magnetic - electro magnetic What electrostatic discharge levels is the unit compatible with at various entry points? Aging test (optional) What tests have

45、been conducted with which results in order to formulate a statement about the expected life time of the unit? Refer to the procedures in MIL-STD-331B, Procedure CI Other (optional) e.g. environmental test for sand and dust, see RTCMDO-lOC, Section 12 Human Interface Arm I Disarm (recommended if appr

46、opriate) How, when, where is the unit to be armed / disarmed? (An excerpt from the Operation Instructions could be useful here.) User calibration (recommended if appropriate) Description of when and how the unit needs to be calibrated? (An excerpt from the Operation Instructions could be useful here

47、.) Parameter changes (recommended if appropriate) Description of how particular functioning parameters can be changed, ifpossible. For instance: Setting / changing of: - activation altitude - activation velocity - freefall time - activation delay - (other) PIA Technical Standard 120 2.01 - AAD Desig

48、n and Testing Report Format September 20, 1995 6. Marking / Labeling (recommended) Description of the unit marking and labeling. At minimum, samples should be presented along with a description of the various portions. (Serial number, part number, date of manufacture, etc.) 7. Documentation (recomme

49、nded) - copy of Operators manual / user documentation - copy of any installation / rigging instructions or documentation - (optional), copy of any servicing documentation - complete list of available documentation - list of languages in which these documents are available 8. Maintenance 8.1. Field maintenance (recommended if appropriate) description of periodic inspection or testing which can or must be made “in the field ”. (at every repack, after contact with water, etc.) 8.2. Manufacturer maintenance (recommended if appropriate) - periodic maintenance cycle - other times factory mainten