NAVY MIL-L-24478 C (1)-2001 LUBRICANT MOLYBDENUM DISULFIDE IN ISOPROPANOL《异丙醇中钼二硫化物润滑剂》.pdf

《NAVY MIL-L-24478 C (1)-2001 LUBRICANT MOLYBDENUM DISULFIDE IN ISOPROPANOL《异丙醇中钼二硫化物润滑剂》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-L-24478 C (1)-2001 LUBRICANT MOLYBDENUM DISULFIDE IN ISOPROPANOL《异丙醇中钼二硫化物润滑剂》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-L-24478C(SH) AMENDMENT 1 23 January 2001 Page 1 of 2 MILITARY SPECIFICATION LUBRICANT, MOLYBDENUM DISULFIDE IN ISOPROPANOL This amendment forms a part of MIL-L-24478C(SH), dated 12 December 1990, and is approved for use by the Naval Sea Systems Command, Department of Navy, and is available for u

2、se by all Departments and Agencies of the Department of Defense. PAGE 2 2.1 Government documents. Add: “STANDARDS” “PUBLICATIONS NAVAL SEA SYSTEMS COMMAND (NAVSEA) S9510-AB-ATM-010/(U) Nuclear Powered Submarine Atmosphere Control Manual NAVSEA S9510-AB-ATM-010/(U) is available from the Naval Sea Sys

3、tems Command, SEA 05L23, 2531 Jefferson Davis Highway, Arlington, VA 22242-5160”. 3.1.1 Materials. Add after the first sentence: “In addition, the material shall have been certified and assigned a “Limited” or “Permitted” usage category in accordance with the Nuclear Powered Submarine Atmosphere Con

4、trol Manual (NAVSEA S9510-AB-ATM-010/(U)”. PAGE 5 4.1.3 Certification of quality conformance. Add after the last sentence: “In addition, prior to supplying material to this specification, the supplier shall provide objective evidence of successful completion of preproduction testing, consisting of m

5、eeting the requirements of paragraph 3.1.1. Products previously tested and certified to NAVSEA S9510-AB-ATM-010 as “Limited” and “Permitted” satisfy the preproduction requirements of this specification unless processing or formulation changes are made.” Beneficial comments, (recommendations, additio

6、ns, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Naval Sea Systems Command, SEA 05Q, 2531 Jefferson Davis Highway, Arlington VA 22242-5160. AMSC N/A FSC 91508030 DISTRIBUTION STATEMENT A. Approved for public release; distribution

7、 is unlimited Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-L-24478C(SH) AMENDMENT 1 23 January 2001 Page 2 of 2 PAGE 8 6.3 Certification of quality conformance format (see 4.1.3). Add after the last sentence: “Requests for preproduction certif

8、ication of lubricants not listed in Appendix A of NAVSEA S9510-AB-ATM-010/(U) can be made in writing to the Naval Sea Systems Command, SEA 05L23, 2531 Jefferson Davis Highway, Arlington, VA 22242-5160. Contingent upon successful completion of an evaluation, NAVSEA 05L23 will certify the material and include the product in Appendix A. The supplier of the material will cover the cost of any needed tests”. Preparing Activity Navy SH (Project 9150-N002) N:CLRME-1958ENC2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-