JEDEC JEP133C-2010 Guide for the Production and Acquisition of Radiation-Hardness- Assured Multichip Modules and Hybrid Microcircuits.pdf

《JEDEC JEP133C-2010 Guide for the Production and Acquisition of Radiation-Hardness- Assured Multichip Modules and Hybrid Microcircuits.pdf》由会员分享，可在线阅读，更多相关《JEDEC JEP133C-2010 Guide for the Production and Acquisition of Radiation-Hardness- Assured Multichip Modules and Hybrid Microcircuits.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、 JEDEC PUBLICATION Guide for the Production and Acquisition of Radiation-Hardness- Assured Multichip Modules and Hybrid Microcircuits JEP133C (Revision of JEP133B, March 2005) JANUARY 2010 JEDEC SOLID STATE TECHNOLOGY ASSOCIATION NOTICE JEDEC standards and publications contain material that has been

2、 prepared, reviewed, and approved through the JEDEC Board of Directors level and subsequently reviewed and approved by the JEDEC legal counsel. JEDEC standards and publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facil

3、itating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for use by those other than JEDEC members, whether the standard is to be used either domestically or internationally. JEDEC standards and publications

4、are adopted without regard to whether or not their adoption may involve patents or articles, materials, or processes. By such action JEDEC does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the JEDEC standards or publications. The inform

5、ation included in JEDEC standards and publications represents a sound approach to product specification and application, principally from the solid state device manufacturer viewpoint. Within the JEDEC organization there are procedures whereby a JEDEC standard or publication may be further processed

6、 and ultimately become an ANSI standard. No claims to be in conformance with this standard may be made unless all requirements stated in the standard are met. Inquiries, comments, and suggestions relative to the content of this JEDEC standard or publication should be addressed to JEDEC at the addres

7、s below, or call (703) 907-7559 or www.jedec.org Published by JEDEC Solid State Technology Association 2009 3103 North 10th Street Suite 240 South Arlington, VA 22201-2107 This document may be downloaded free of charge; however JEDEC retains the copyright on this material. By downloading this file t

8、he individual agrees not to charge for or resell the resulting material. PRICE: Please refer to the current Catalog of JEDEC Engineering Standards and Publications online at http:/www.jedec.org/Catalog/catalog.cfm Printed in the U.S.A. All rights reserved PLEASE! DONT VIOLATE THE LAW! This document

9、is copyrighted by JEDEC and may not be reproduced without permission. Organizations may obtain permission to reproduce a limited number of copies through entering into a license agreement. For information, contact: JEDEC Solid State Technology Association 3103 North 10th Street Suite 240 South Arlin

10、gton, VA 22201-2107 or call (703) 907-7559 JEDEC Publication No. 133C -i- GUIDE FOR THE PRODUCTION AND ACQUISITION OF RADIATION-HARDNESS ASSURED MULTICHIP MODULES AND HYBRID MICROCIRCUITS Contents PageForeword iiiIntroduction iii1 Scope 12 Normative references 33 Terms and definitions 34 Requirement

11、s 64.1 General requirements 64.2 Detailed requirements 94.2.1 Certification requirements 94.2.2 Qualification requirements 214.2.3 Maintenance requirements 23Annex A Bibliography 24Annex B Differences between JEP133C and JEP133B 25Figures 1 Makeup and categories of MCM and hybrid devices 22 Typical

12、technology flow for RHA modules 7Table 1 MCM/RHA functional flow analysis 8JEDEC Publication No. 133C- -ii- JEDEC Publication No. 133C -iii- Foreword This document is intended for use by suppliers and users of radiation-hardness-assured (RHA) multichip modules (MCMs) and hybrid microcircuits. It pro

13、vides guidance as to how to achieve, maintain and ensure the required levels of radiation-hardness given the fact that the constituent dice can have different levels of hardness and hardness assurance. It has been prepared under the direction of JEDEC JC-13.5 (Hybrid, RF/Microwave, and MCM Technolog

14、y) Committee, and contributions of the JEDEC JC-13.4 (Radiation-Hardness Assurance) Committee and the members of the AF/NASA/DTRA Space Parts Working Group Hardness Assurance Committee and Users Group. Introduction The development of radiation-hardened multichip modules and hybrid microcircuits can

15、take place in one of three ways: Build-To-Print, where the buyer (also referred to as the original equipment manufacturer, OEM) assumes responsibility for all aspects of the performance of the finished module. Build-To-Spec, where the buyer provides the performance specifications, including radiatio

16、n, to the manufacturer, who then interprets them, and designs, acquires the component parts, assembles, and tests the module. A joint effort between the buyer and the manufacturer, with each one taking responsibility for different parts of the development. For example, the buyer could take responsib

17、ility for the calculation of the radiation specifications and for the radiation testing. The manufacturer would then be responsible for the design, piece-part procurement, and assembly. Because this document is primarily for use by the manufacturers, it will present the tasks as though the procureme

18、nt is a build-to-spec type, where the manufacturer has the responsibility for all of the tasks. We recognize that is not always the case, with the joint effort scheme probably used more often. The development process is a complex undertaking because: The dice used for the circuits can come from a wi

19、de variety of suppliers ranging from qualified sources of radiation hardened microcircuits or discretes, where the radiation response of their devices is specified, to high volume commercial suppliers that provide no guarantees concerning device hardness. The radiation response of an MCM/hybrid must

20、 be addressed as a subsystem rather than simply as a collection of dice. That is, it is possible that the within-specification radiation response of a die can result in the malfunctioning of an MCM/hybrid device due to the interaction of the interconnected die. In very high dose rate environments, t

21、he actual MCM/hybrid structure (lands, grooves, etc.) can become a source of radiation-induced current, further impacting individual die response. The actual hybrid/MCM construction methods (e.g., ground connections, die attach, etc.) can influence the overall package and individual die response. JE

22、DEC Publication No. 133C -iv- Introduction (contd) This Guide describes how to deal with the various situations that an MCM/hybrid developer, procuring activity or user will encounter. The guidance is intended to supplement that already provided in the two relevant performance specifications: MIL-PR

23、F-38534, General Requirements for Custom Hybrid Microcircuits and MIL-PRF-38535, General Specification for Integrated Circuits (Microcircuits) Manufacturing, as well as MIL-PRF-19500, General Specification for Semiconductor Devices. This Guide is designed to provide support to several potential user

24、 groups, including: 1) Government Program Office (PO) personnel, will be able to use the Guide as a metric to: a) quantify the rigor of the hardening effort for the MCM/hybrid devices used in their system or equipment; b) adopt the radiation test data obtained during the characterization of the MCM/

25、hybrid to support radiation hardening and survivability analysis. 2) Original Equipment and System Manufacturers (OEMs), who can use the Guide to: a) formulate the details of the acquisition/procurement document used to obtain MCM/hybrid devices concerning radiation response issues, e.g., testing an

26、d analysis; b) determine the level of effort required to obtain RHA MCM/hybrids as a function of radiation environment; c) establish a radiation response database to support any subsequent system radiation hardening and survivability analysis or determination. 3) MCM/Hybrid Suppliers (Manufacturers)

27、: This Guide should be especially useful to manufacturers that lack experience or expertise in radiation hardening and survivability and RHA since it outlines various issues that must be considered. In addition, for those manufacturers who will use third parties for radiation issues, the document ca

28、n be used as a guide to identify the relevant concerns and facilitate communications. It will serve to: a) formulate the details of any die acquisition/procurement documents with respect to radiation effects and RHA; b) assist in the identification of critical requirements and RHA issues; c) assist

29、in the implementation of an MCM/hybrid RHA system and identify the level of effort required to provide RHA devices; Many MCM/hybrid manufacturers do not possess an RHA capability. For them, the document will facilitate their interaction with either third party sources or others, e.g., the system or

30、equipment manufacturer, and will establish a baseline for the activities needed to provide radiation-hardness-assured MCMs and hybrids. This use of the Guide should be especially valuable. JEDEC Publication No. 133C Page 1 GUIDE FOR THE PRODUCTION AND ACQUISITION OF RADIATION-HARDNESS ASSURED MULTIC

31、HIP MODULES AND HYBRID MICROCIRCUITS (From JEDEC Board Ballot JCB-09-66, formulated under the cognizance of the JC-13.5 Subcommittee on Hybrid, RF/Microwave, and MCM Technology.) 1 Scope The information contained herein is intended for use with MIL-PRF-38534 for those multichip modules and hybrids t

32、hat are marked as radiation-hardness-assured parts and produced under the provisions of that document or that are built to a radiation specification. Guidance is provided concerning the design, development, fabrication, acquisition and test of multichip modules and hybrid circuits that have radiatio

33、n requirements. This document is not intended to provide detailed guidance about how to assure the hardness of the dice, since it is recognized that dice with a wide range of hardness will have to be used. If non-RHA dice are used, the user-developed RHA procedures found in MIL-PRF-38535 should be u

34、sed. Rather, this document provides guidance as to how to assure the hardness of the entire module, given the wide range of the radiation hardness and level of hardness assurance of the individual dice to be used in the module. Specifically, four types of dice are available (in order of decreasing l

35、evel of specification controls): Radiation hardness-assured QML controlled (or equivalent). Dice of this type can be used with no additional testing. Non-hardened QML (or equivalent) change-controlled dice. Such devices require radiation characterization. However once this is done, minimal lot testi

36、ng would be necessary. Inherently radiation hard or non-hard dice that are not under a formally recognized change control system, but supplier support (e.g., change control notice, etc.) is available. Commercial grade or other grade die that appear to have adequate radiation tolerance, but where no

37、supplier support is provided for the qualification or radiation-hardness assurance. This presents a worst-case situation and requires the most stringent RHA program to ensure that the radiation performance requirements of all of the modules produced are satisfied. The use of dice from any of the abo

38、ve noted categories, combined with the various types of MCM/hybrid suppliers, can then lead to the following categories of MCM/hybrid devices. Commercial module designs screened for RHA Commercial module designs upgraded with radiation-hardened dice Standard product RHA modules Custom product RHA mo

39、dules. The relationships between the various types of dice and finished modules are shown in figure 1. The objective of this Guide is to provide guidance to allow a supplier or user to establish and complement the RHA requirements for any of these MCM/hybrid combinations. JEDEC Publication No. 133C

40、Page 2 1 Scope (contd) Two acquisition strategies can be inferred from figure 1. The first is where significant knowledge concerning the constituent chips is available. This approach, as exemplified by the right branch of the figure, places emphasis on component acquisition (i.e., screening and char

41、acterization) and subsequent analysis (as required) to obtain MCM/hybrid certification and qualification. It would apply to module manufacturers and to users who have access to accurate component lists, design rules, fabrication methods, etc. It is discussed in detail in subsequent sections of this

42、Guide and should result in the most accurate and cost-effective course of action to obtain RHA qualification. The second approach is where little or nothing is known about the constituent chips. This approach, as exemplified by the left branch of the figure, represents a worst-case situation from bo

43、th a technical and cost a point-of-view. If only input/output information is available, one has no choice but to try to determine the failure or response distribution of the module for each of the applicable radiation environments. This method may be acceptable if a statistically significant sample

44、size can be tested and considerable margin exists with respect to the specified radiation levels. The key issues involved here are: an adequate sample size, the homogeneity of the sample, and the sample correlation to flight components. Thus significant effort must go into the development of the RHA

45、 test program for this technique. If some minimal knowledge of the component types is available (e.g., high speed bipolar, power MOSFET, etc.), it can be used to guide the development of the RHA test program. For example, if it is known that a power MOS circuit is used, emphasis on Single Event Effe

46、cts (SEE) testing would be appropriate. Conversely, if a module is known to contain only high speed CMOS digital circuits, then neutron testing and enhanced low rate dose sensitivity (ELDRS) testing can be eliminated. Thus, despite a lack of detailed knowledge about the module, some choices can be m

47、ade about the radiation testing to improve the test coverage and optimize the test effort. Figure 1 Makeup and categories of MCM and hybrid devices Commercial Module Designs Screened for RHA Commercial ModuleDesigns Upgraded with RHA Dice Standard Product RHA Module Custom Product RHA Module RHA Scr

48、eening Commercial Module RHA Screening RHA Die Commercial Die Die Under Change Control JEDEC Publication No. 133C Page 3 2 Normative references The following standards contain provisions that, through reference in this text, constitute provisions of this Guide. All standards are subject to revision,

49、 and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. MIL-STD-750, Test Methods for Semiconductor Devices. MIL-STD-883, Test Methods and Procedures for Microelectronics. MIL-PRF-38534, Performance Specification, Hybrid Microcircuits, General Requirements for. MIL-PRF-38535, Performance Specification, Integrated Circuits (Microcircuits) Manufacturing, General Specification for. MIL-PRF-19500, Performance Specification, Semiconductor Devices,