GSA A-A-2518-1987 DRILL TWIST (CARBIDE TIP)《麻花钻(硬质合金刀头)》.pdf

《GSA A-A-2518-1987 DRILL TWIST (CARBIDE TIP)《麻花钻(硬质合金刀头)》.pdf》由会员分享，可在线阅读，更多相关《GSA A-A-2518-1987 DRILL TWIST (CARBIDE TIP)《麻花钻(硬质合金刀头)》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、A-A- 2 5 18 December 7, 1987 COMMERCIAL ITEM DESCRIPTION DRILL, TWIST (CARBIDE TIP) The General Services Administration has authorized the use of this commercial item description. This commercial item description covers twist drills with carbide tips intended for use in drilling cast iron and other

2、nonferrous materials. Salient characteristics: Design. Drills shall be of the straight shank, jobbers length type with two helical flutes for heavy duty use. in drilling cast iron and other nonferrous materials. Material. Industrial Grade C-2 Carbide tipped cutting edges brazed or welded on high spe

3、ed steel twist drills. Included angle of point. 118 - t5 degrees. Sizes and dimensions. Sizes and dimensions (in inches) shall be as required for jobbers length drills in accordance with ANSI B94.11M-1979 for the National Stock Number (NSN) specified. National Stock Number (NSN) 5133-00-222-9466 513

4、3-00-222-9467 5133-00-222-9468 5133-00-222-9469 5 13 3- 0- 2 2 2- 9 4 7 0 5133-00-222-9471 5133-00-894-5612 5133-00-894-5615 5133-00-948-8067 5133-00-948-806a 5133-01-050-9904 Drill Size (Di ame t er ) 1/2 (0.50001 3ja (0.3750j 7/16 (0.4375) 1/4 (0.2500) 5/16 (0.3125) 3/16 (0.1875) 7/32 (0.2188) 11/

5、32 (0.3438) NO. 10 (0.1935) NO. 21 (0.1590) 27/64 (0.4219) Flute Length 4-1/2 3-5ja 4-1/16 2-3/4 3-3/16 2-5/16 3-7/16 2-7/16 3-15/16 2-1/2 2- 118 Overa 11 Length 6 5 5- 1/2 4 4-1/2 3-1/2 3-3/4 4- 3/4 3-518 3-1/4 5-318 Marking. The shank of each drill shall be marked in a legible and permanent manner

6、 with the drill-size, manufacturers name or recognizable trademark, and country of origin. Workmanship. Drills shall be straight, and free of any defects which may adversely affect safety, serviceability, or durability. Quality assurance provisions. Sampling for inspection shall be in accordance wit

7、h MIL-STD-105, Sampling Procedures and Tables for Inspection by Attributes, except where otherwise indicated herein. The lot size shall consist of all drills with the same NSN offered for acceptance at one time. A sample unit shall be one drill. A. Examination for design, dimensions and workmanship.

8、 The inspection level shall be S-2 with an acceptable quality level (AQL) of 4.0 percent defective. B. Material. Material shall be verified by manufacturers certification. C. Packaging Inspection. An examination shall be made to determine compliance with all preservation, packaging, packing, labelin

9、g, and marking requirements as specified in the contract or purchase order. The inspection level shall be S-2 with an AQL of 2.5 defects per hundred units. THIS DOCUMENT CONTALNS 2. PAGES. FSC 5133 - JISTIBUTION STATEMENT A; Approved for -public release; distribution fs unlimited. /22dW24 -. Provide

10、d by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-2518 51 7777774 O042888 1-E A- A - 2 5 L.8 Regulatory Eequirements. In accordance with the section 23.403 of the Federal AquiSiit4on ReguIations, the Governments policy is to acquire items composed of the

11、highest p=ercentage of recovered materials practicable, consistent with maintaining a satis5actory level of competition without adversely affecting performance requirements or exposing suppliers employees to undue hazards from the recovered materials. Preservation, packaging, packing, labeling, and

12、marking. The preservation, packag- ing, packing, labeling, and marking shall be as specified in the contract or order. (For use by GSA; optional for other agencies) DoD may use Commercial Packaging, Standard ASTM D3951. Notes : Copies of ANSI Standards can be obtained from American National Standard

13、s Institute, Incorporated, 1430 Broadway, New York, NY 10018. ASTM standards are available from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, Pennsylvania 19103. Copies of Military Standards are available from the Naval Publicatios and Forms Center, 5801 Tabor Avenu

14、e;, Philadelphia, PA 19120. MILITARY INTERESTS Military Coordinating Activity: Army - GL Custodians: Army - GL Air Force - 99 Review Activities: Air Force - 84 User Activities: Army - .AR, ME Navy - MC 2 PREPARING ACTIVITY: GSA-FSS Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-