FORD WSE-M2C906-B-2009 OIL ENGINE API CG-4 SH SAE 15W-40 INITIAL FILL TO BE USED WITH FORD WSS-M99P1111-A 《初始注入的API CG-4 SH、SAE 15W-40发动机油 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD WSE-M2C906-B-2009 OIL ENGINE API CG-4 SH SAE 15W-40 INITIAL FILL TO BE USED WITH FORD WSS-M99P1111-A 《初始注入的API CG-4 SH、SAE 15W-40发动机油 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD WSE-M2C906-B-2009 OIL ENGINE API CG-4 SH SAE 15W-40 INITIAL FILL TO BE USED WITH FORD WSS-M99P1111-A 《初始注入的API CG-4 SH、SAE 15W-40发动机油 与标准FORD WSS-M99P1111-A一起使用 》.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 10 27 N-STATUS No known use. No Replacement Named D. DiGregorio, NA 2004 05 25 Revised Para 3.0 inserted; para 3.1, 3.6 “NiL“ or Trace“ are not permissible S _ _ _ _ _ P _ _ _ _ _ Zn _ _ _ _ _ Ba _ _ _ _ _ Ca _ _ _ _ _ Mg _ _ _ _ _ Na _ _

2、 _ _ _ N _ _ _ _ _ B _ _ _ _ _ Cu _ _ _ _ _ Cl _ _ _ _ _ Sulfated Ash _ _ _ _ _ V. Test Conducted _ _ _ _ _ Comments: _ _ _ _ _ ENGINEERING MATERIAL SPECIFICATIONWSE-M2C906-BPrinted copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 8 of 9 API CG-4/SH SAE 15W-40 Supplement A

3、Page 5 of 5 Oil Company_ Date_ Product Name_ Product Code_ Specification Test Mfg. Physical/Chemical Properties Requirements Results Limits Viscosity at 150 C (ASTM D 445), mm2/s _ _ Viscosity at 100 C (ASTM D 445), mm2/s 12.5 to .001%) _ _ _ Signature_ Title_ (2) STANDARD TEST METHOD. HIGH TEMPERAT

4、URE FOAMING CHARACTERISTICS OF LUBRICATING OILS. ENGINEERING MATERIAL SPECIFICATIONWSE-M2C906-BPrinted copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 9 of 9 API CG-4/SH SAE 15W-40 Supplement B Page 1 of 1 Oil Company_ Date_ Product Name_ Product Code_ Blend Plant Location

5、_ Quality Control Certification Approved Physical/Chemical Properties Limits Frequency Viscosity at 100 C (ASTM D 445), mm2/s _ _ Viscosity at 40 C (ASTM D 445), mm2/s _ _ Density (ASTM D 1298), kg/L _ _ Viscosity at -15 C (SAE J300 App. A), mPa.s _ _ Viscosity at -20 C (SAE J300 App. A), mPa.s _ _

6、Borderline Pumping Temp. (ASTM D 4684), C _ _ Pour Point (ASTM D 97), C _ _ Stable Pour Point (SAE J300 App. B), C _ _ Viscosity at -20 C (FLTM BJ 127-01), Pa.s _ _ Flash Point (ASTM D 93), C _ _ Volatility Evap. Loss, 1 h at 250 C (CEC L-40-T-87), % _ _ Dist. by GC at 371 C (ASTM D 2887), % _ _ She

7、ar Stability (ASTM D 445), mm2/s After ASTM D 3945 or CEC L-14A-78 _ _ After 10 h in “L-38“ test _ _ Viscosity at 150 C and 10E6/s (ASTM D 4683 or CEC L-36A-87), mPa.s New Oil _ _ After ASTM D 3945 or CEC L-14A-78 _ _ Copper Corrosion (ASTM D 130, 3 h at 100 C) _ _ Filterability (FLTM BJ 124-01), %

8、_ _ Foaming Sequence I, mL _ _ Sequence II, mL _ _ Sequence III, mL _ _ Sequence IV, mL _ _ Color Must contain no dyes Homogeneity Must be homogeneous Odor Must be free of objectionable odor Purity Must be clear, bright and free of foreign matter Water content (ASTM D 95), % 0.05 max Total Acid Numb

9、er (ASTM D 664), mg KOH/g _ _ Total Base Number (ASTM D 2896), mg KOH/g _ _ Sulfated Ash (ASTM D 874), % _ _ Barium, % _ _ Nitrogen, % _ _ Boron, % _ _ Phosphorus, % _ _ Calcium, % _ _ Potassium, % _ _ Chlorine, % _ _ Sodium, % _ _ Copper, % _ _ Sulfur, % _ _ Magnesium, % _ _ Zinc, % _ _ Other (.001%) _ _ _ Supplier Signature_ Title_ Materials Engineering Concurrence_