ETSI TR 103 309-2015 CYBER Secure by Default - platform security technology (V1 1 1)《网络 默认安全 平台安全技术 (V1 1 1)》.pdf

《ETSI TR 103 309-2015 CYBER Secure by Default - platform security technology (V1 1 1)《网络 默认安全 平台安全技术 (V1 1 1)》.pdf》由会员分享，可在线阅读，更多相关《ETSI TR 103 309-2015 CYBER Secure by Default - platform security technology (V1 1 1)《网络 默认安全 平台安全技术 (V1 1 1)》.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TR 103 309 V1.1.1 (2015-08) CYBER; Secure by Default - platform security technology TECHNICAL REPORT ETSI ETSI TR 103 309 V1.1.1 (2015-08) 2 Reference DTR/CYBER-0007 Keywords cybersecurity, platforms, secure by default ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +

2、33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made availabl

3、e in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only pre

4、vailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ET

5、SI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any f

6、orm or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction i

7、n all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Org

8、anizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TR 103 309 V1.1.1 (2015-08) 3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32

9、.2 Informative references 5g33 Abbreviations . 5g34 Secure by default approach 6g35 Annex structure 6g35.1 Approach 6g35.2 Introduction 6g35.3 Specific challenges . 6g35.4 Enabling technologies and good practice . 6g3Annex A: Personally owned IT . 7g3A.1 Introduction 7g3A.2 Specific Challenges 7g3A.

10、2.1 User ID - who wants access? How can their identity be verified? . 7g3A.2.2 Location - where is the access request coming from? Is that appropriate? . 7g3A.2.3 Device ID - which devices are connecting to the network? Can this device be trusted to access that resource?. 7g3A.2.4 Device state - how

11、 is the device configured? Is the system (including apps) up to date? 7g3A.2.5 On-Device isolation - is sensitive data protected from malicious or insecure applications on a device? . 8g3A.3 Enabling technologies and good practice . 8g3A.3.1 Introduction 8g3A.3.2 Trusted Platform Module . 8g3A.3.3 S

12、ecure Element . 8g3A.3.4 Trusted Execution Environment . 8g3A.3.5 FIDO alliance . 8g3History 9g3ETSI ETSI TR 103 309 V1.1.1 (2015-08) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these ess

13、ential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updat

14、es are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server)

15、 which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI Technical Committee Cyber Security (CYBER). Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“,

16、“will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction Often in order to make todays produ

17、cts and services secure, their usability has to be severely reduced. If an enterprise is to operate securely in a connected world, every product, system or service that is procured or deployed should be Secure by Default. It should actually be hard to make them insecure; technology should improve us

18、ability without compromising security. Standards have been developed which describe how to provide the required features and mechanisms, however adoption of these into real systems is often slow. A key reason for slow adoption is the lack of awareness outside the technical community of which securit

19、y features exist and how they should be used. Effort is needed to build demand as well as supply. ETSI ETSI TR 103 309 V1.1.1 (2015-08) 5 1 Scope The present document is intended to encourage development and adoption of secure by default platform security technologies by showing how they can be used

20、 to effectively solve real business problems, and improve the usability of secure services. The intended audience is decision makers rather than engineering teams where they are deciding which features to include in a new platform, or which are required as part of a procurement activity. The present

21、 document focuses on a structure for describing identified business needs/issues for a particular set of users; detailing the characteristics needed of possible solutions, and finally identifying existing or emerging standards which provide those characteristics. 2 References 2.1 Normative reference

22、s References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referen

23、ced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced do

24、cuments are necessary for the application of the present document. Not applicable. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-s

25、pecific references, the latest version of the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the

26、application of the present document but they assist the user with regard to a particular subject area. Not applicable. 3 Abbreviations For the purposes of the present document, the following abbreviations apply: FIDO Fast IDentity Online IT Information Technology ETSI ETSI TR 103 309 V1.1.1 (2015-08

27、) 6 4 Secure by default approach This clause describes the underlying philosophy behind secure by default. The aim is to identify real business problems and suggest ways of solving them at root cause, rather than by applying patches or stop-gap measures to address particular issues. The emphasis is

28、therefore on security mechanisms embedded in core device functions; supplied literally by default in products instead of being added afterwards via updates or complex configuration. New features of this nature require fundamental changes to devices, hence development can take time. Promoting adoptio

29、n may require that technical solutions be identified when they are still maturing; prototypes exist to verify the concept, however market support is required in order to justify investment in refining a product. Finally it is clear that simply developing technical components is almost never sufficie

30、nt to solve problems in the real world. Practical guidance is needed to ensure these components can be integrated appropriately into deployed systems. As well as identifying technologies, it is necessary to point out relevant good practice guidance where it exists. 5 Annex structure 5.1 Approach Thi

31、s clause describes the framework that each annex needs to follow in relating business issues to the enabling technologies that address them. 5.2 Introduction Describe a particular issue (problem or opportunity) at a high level. Aim to show why it is relevant to a particular market area. 5.3 Specific

32、 challenges Break down the high level scope into discrete challenges which can be described in non-technical terms, but which could be addressed using technology. 5.4 Enabling technologies and good practice Relate the above challenges to specific technologies which could provide solutions. While ack

33、nowledging that vendor proprietary solutions exist, it is not the aim of the present document to advertise them; rather to point out technical standards activities where they exist, and explain their relevance to the specific challenges. Where it exists, explain where to find practical guidance on g

34、ood practice for integrating the specified technologies into deployed systems. It is outside the scope of the present document to discuss the fine details of particular technical standards. The aim is to provide sufficient information to explain their relevance and direct further enquiries if they a

35、re needed. ETSI ETSI TR 103 309 V1.1.1 (2015-08) 7 Annex A: Personally owned IT A.1 Introduction It is inevitable that people will increasingly use personally owned IT in their jobs. Flexibility and ease of access to time-critical information are clear benefits, however the huge range of devices and

36、 user behaviours cause problems when it comes to managing risk. Security-conscious enterprises need to design systems with this in mind; allow useful connectivity to a very wide range of devices, while at the same time understanding how and when to manage access to more sensitive resources. Technolo

37、gy can help achieve this goal; the aim of this note is firstly to identify key challenges for risk owners in this area; secondly to encourage risk owners to investigate technical solutions. It is clearly not sufficient to rely on procedural controls and user education to manage risk. It is necessary

38、 to initially identify resources that are very low risk, and can easily be made available with minimal controls (e.g. via a web service, with basic user authentication). The network architecture should isolate these from the more sensitive components, such that the former can be accessed wherever it

39、 is needed. Extra checks can subsequently be implemented to enforce access controls for the more protected parts of the system. A.2 Specific Challenges A.2.1 User ID - who wants access? How can their identity be verified? Access should not be granted to an individual until the system is confident th

40、at they are the person they claim to be, and that they are appropriately authorized. The degree of confidence required is likely to be different for different types of access. The challenge is to establish confidence swiftly, with minimum inconvenience to the user. A.2.2 Location - where is the acce

41、ss request coming from? Is that appropriate? Some types of access may not be appropriate from certain locations (e.g. a public place, or outside certain areas of an office). Further, unexpected location information (e.g. from a country the requestor was known not to be visiting) might imply that an

42、access request is not genuine. The challenge is to understand what location information is useful, and how trustworthy the information is likely to be. A.2.3 Device ID - which devices are connecting to the network? Can this device be trusted to access that resource? Strong, reliable device identific

43、ation allows access control decisions to be made on a per-device basis, as well as per-user (e.g. some platforms may be able to access data not available to less protected hardware). Additionally such mechanisms can automate asset management processes and keep track of valuable devices. For example,

44、 log files would show when and where each device has been used, and by whom. A.2.4 Device state - how is the device configured? Is the system (including apps) up to date? In addition to knowing the identity of a device, one needs to be confident that it is appropriately configured; for example that

45、data stored on a device will be encrypted, or that an application will be appropriately isolated from other unknown software. One should not trust a device unless they have confidence that recent patches have been promptly applied. The challenge is to ensure that when a device reports its state, the

46、 information is useful and trustworthy. ETSI ETSI TR 103 309 V1.1.1 (2015-08) 8 A.2.5 On-Device isolation - is sensitive data protected from malicious or insecure applications on a device? The challenge is to achieve effective isolation without compromising usability. A.3 Enabling technologies and g

47、ood practice A.3.1 Introduction A number of vendors provide proprietary solutions to meet the above challenges. The goal of the present document is to encourage enterprises to seek out hardware-backed solutions built into commodity products, and to identify relevant standards where they exist. In ge

48、neral the standards bodies provide advice on good practice in addition to the component specifications. A.3.2 Trusted Platform Module https:/www.trustedcomputinggroup.org/developers/trusted_platform_module/faq. Key storage provides device ID. Key storage plus anti-hammering protection provides for s

49、trong user ID without a need for complex passwords. Measurement and attestation provides reliable information on device state. A.3.3 Secure Element https:/www.globalplatform.org/mediaguideSE.asp. Key storage provides device ID. A.3.4 Trusted Execution Environment https:/www.globalplatform.org/mediaguidetee.asp. Provides isolation of critical software components for a variety of use cases, including user authentication. A.3.5 FIDO alliance http:/fidoalliance.org/about. Collection of specifications aimed at reducing reliance on passwords, and pr