ETSI TR 102 736-2007 Universal Mobile Telecommunications System (UMTS) 2 6 GHz Frequency Division Duplex (FDD) downlink external (V7 0 0)《全球移动通信系统(UMTS) 2 6 GHz频率双分(FDD)下行链路外部(版本7 .pdf

《ETSI TR 102 736-2007 Universal Mobile Telecommunications System (UMTS) 2 6 GHz Frequency Division Duplex (FDD) downlink external (V7 0 0)《全球移动通信系统(UMTS) 2 6 GHz频率双分(FDD)下行链路外部(版本7 .pdf》由会员分享，可在线阅读，更多相关《ETSI TR 102 736-2007 Universal Mobile Telecommunications System (UMTS) 2 6 GHz Frequency Division Duplex (FDD) downlink external (V7 0 0)《全球移动通信系统(UMTS) 2 6 GHz频率双分(FDD)下行链路外部(版本7 .pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TR 102 736 V7.0.0 (2007-09)Technical Report Universal Mobile Telecommunications System (UMTS);2,6 GHz Frequency Division Duplex (FDD) downlink externalETSI ETSI TR 102 736 V7.0.0 (2007-09) 2 Reference DTR/MSG-002600FDDtr Keywords UMTS, FDD, radio ETSI 650 Route des Lucioles F-06921 Sophia Anti

2、polis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The prese

3、nt document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers

4、of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/sta

5、tus/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restricti

6、on extend to reproduction in all media. European Telecommunications Standards Institute 2007. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the

7、benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TR 102 736 V7.0.0 (2007-09) 3 Contents Intellectual Property Rights4 Foreword.4 1 Scope 5 2 References 5 2.1 Informative references5 3 Definitions, symb

8、ols and abbreviations .6 4 Task description .7 5 Frequency arrangements.7 5.1 Frequency bands.7 6 Deployment aspects8 6.1 Co-existence in the band 8 6.1.1 Co-existence with IMT-20008 6.1.2 Co-existence with GSM8 6.1.3 Co-existence with TDD 8 6.2 Co-existence with adjacent bands 8 6.2.1 Uplink bands

9、1 900 MHz - 1 920 MHz and 2 010 MHz - 2 025 MHz .8 6.2.2 Downlink band 2 570 - 2 620 MHz 9 6.2.3 Band gap at 2 570 - 2 585 MHz10 7 Study of RF requirements (Rel-7) 10 7.1 Channel raster and numbering10 7.1.1 Channel raster considerations .10 7.1.2 Definition of a UARFCN range for Band XV 10 7.1.3 De

10、finition of a UARFCN range for Band XVI.11 7.2 Commonality with other bands 12 7.2.1 Possibilities for multi-band operation.12 7.3 Specific UE requirements.13 7.3.1 Band XV and XVI Reference sensitivity level: 13 7.3.2 Band XVI out-of-band blocking requirements: 13 7.4 Specific BS requirements .14 8

11、 Required changes for specifications (Rel-7) 14 8.1 Required changes to TS 125 10114 8.2 Required changes to TS 125 10417 8.3 Required changes to TS 125 11318 8.4 Required changes to TS 125 13318 8.5 Required changes to TS 125 14119 8.6 Required changes to TS 125 30620 8.7 Required changes to TS 125

12、 30721 8.8 Required changes to TS 125 33121 8.9 Required changes to TS 125 42321 8.10 Required changes to TS 125 46121 8.11 Required changes to TS 125 46322 8.12 Required changes to TS 134 12422 Annex A: Change history 23 History 24 ETSI ETSI TR 102 736 V7.0.0 (2007-09) 4 Intellectual Property Right

13、s IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential,

14、or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been c

15、arried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI Technical Co

16、mmittee Mobile Standards Group (MSG). ETSI ETSI TR 102 736 V7.0.0 (2007-09) 5 1 Scope The present document is a technical report of the UMTS 2,6 GHz FDD Downlink External work item, which was approved to establish in ETSI MSG#12. The purpose of the work item is to provide UMTS specification support

17、for the following band allocation options: 2 010 - 2 025 MHz and 1 900 - 1 920 MHz: Up-link options (UE transmit, Node B receive). 2 570 - 2 620 MHz: Down-link (Node B transmit, UE receive). In addition to the schedule and status of the work item, the report includes a description of the motivation

18、of requirements and specification recommendations. This work item is intended only for ITU region 1 and is inline with ECC Decision (ECC/DEC/(05)05) 1 of 18 March 2005 on harmonized utilization of spectrum for IMT-2000/UMTS systems operating within the band 2 500 - 2 690 MHz, and ECC Decision (ECC/D

19、EC/(06)01) 2 of 24 March 2006 on the harmonized utilization of spectrum for terrestrial IMT-2000/UMTS systems operating within the bands 1 900 - 1 980 MHz, 2 010 - 2 025 MHz and 2 110 - 2 170 MHz. 2 References References are either specific (identified by date of publication and/or edition number or

20、 version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific reference may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced do

21、cument for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. For online referenced documents, information sufficient to identify and locat

22、e the source shall be provided. Preferably, the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the method of access to t

23、he referenced document and the full network address, with the same punctuation and use of upper case and lower case letters. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Informative references 1 ECC/DEC/(

24、05)05: Electronic Communications Committee, “ECC Decision of 18 March 2005 on harmonized utilization of spectrum for IMT-2000/UMTS systems operating within the band 2500 - 2690 MHz“. 2 ECC/DEC/(06)01: Electronic Communications Committee, “ECC Decision of 24 March 2006 on the harmonized utilization o

25、f spectrum for terrestrial IMT-2000/UMTS systems operating within the bands 1900 - 1980 MHz, 2010 - 2025 MHz and 2110 - 2170 MHz“. 3 3GPP TR 25.810 (V7.0.0): “UMTS 2.6 GHz (FDD) Work Item Technical Report; (Release 7)“. 4 3GPP TR 25.811 (V7.0.0): “UMTS 2.6 GHz TDD Work Item Technical Report (Release

26、 7)“. ETSI ETSI TR 102 736 V7.0.0 (2007-09) 6 5 ERC Report 65, Electronic Communications Committee: “Adjacent Band Compatibility between UMTS and Other Services in the 2 GHz Band“, Menton, May 1999; revised in Helsinki, November 1999. 6 ETSI TR 125 942 (V6.4.0): “Universal Mobile Telecommunications

27、System (UMTS); Radio Frequency (RF) system scenarios (3GPP TR 25.942 version 6.4.0 Release 6)“. 7 ETSI TS 125 101: “Universal Mobile Telecommunications System (UMTS); User Equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 7.8.0 Release 7)“. 8 ETSI TS 125 113: “Universal M

28、obile Telecommunications System (UMTS); Base station and repeater electromagnetic compatibility (EMC) (3GPP TS 25.113 version 7.6.0 Release 7)“. 9 ETSI TS 125 133: “Universal Mobile Telecommunications System (UMTS); Requirements for support of radio resource management (FDD) (3GPP TS 25.133 version

29、7.8.0 Release 7)“. 10 ETSI TS 125 141: “Universal Mobile Telecommunications System (UMTS); Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 7.8.0 Release 7)“. 11 ETSI TS 125 306: “Universal Mobile Telecommunications System (UMTS); UE Radio Access capabilities (3GPP TS 25.306 versi

30、on 7.4.0 Release 7)“. 12 ETSI TS 125 331: “Universal Mobile Telecommunications System (UMTS); Radio Resource Control (RRC); Protocol specification (3GPP TS 25.331 version 7.5.0 Release 7)“. 13 ETSI TS 125 423: “Universal Mobile Telecommunications System (UMTS); UTRAN Iur interface Radio Network Subs

31、ystem Application Part (RNSAP) signalling (3GPP TS 25.423 version 7.5.0 Release 7)“. 14 ETSI TS 125 461: “Universal Mobile Telecommunications System (UMTS); UTRAN Iuant interface: Layer 1 (3GPP TS 25.461 version 7.5.0 Release 7)“. 15 ETSI TS 125 463: “Universal Mobile Telecommunications System (UMTS

32、); UTRAN Iuant interface: Remote Electrical Tilting (RET) antennas Application Part (RETAP) signalling (3GPP TS 25.463 version 7.5.0 Release 7)“. 16 ETSI TS 134 124: “Universal Mobile Telecommunications System (UMTS); Electromagnetic compatibility (EMC) requirements for mobile terminals and ancillar

33、y equipment (3GPP TS 34.124 version 7.5.0 Release 7)“. 17 ETSI TS 125 307: “Universal Mobile Telecommunications System (UMTS); Requirements on User Equipments (UEs) supporting a release-independent frequency band (3GPP TS 25.307 version 7.1.0 Release 7)“. 18 ETSI TS 125 104: “Universal Mobile Teleco

34、mmunications System (UMTS); Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 7.7.0 Release 7)“. 19 ETSI TR 121 905 “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Vocabulary for 3GPP Specifications“. 3 Definit

35、ions, symbols and abbreviations For the purposes of the present document, the terms and definitions, symbols and abbreviations given in 1 to 19 apply. ETSI ETSI TR 102 736 V7.0.0 (2007-09) 7 4 Task description The work item task is to generate necessary information of 2,6 GHz FDD system detailed bel

36、ow: Generate a report summarizing a study of radio requirements UTRA FDD: - 2 010 - 2 025 MHz and 1 900 - 1 920 MHz: Up-link options (UE transmit, Node B receive). - 2 570 - 2 620 MHz: Down-link (Node B transmit, UE receive). The co-existence with IMT2000 technology within 2 500 - 2 690 MHz and with

37、 1 900 - 1 980, 2 010 - 2 025 and 2 110 - 2 170 MHz bands needs to be considered. Generate CRs to update the appropriate FDD documents. study any issues related to UMTS at 2,6 GHz FDD DL external band-signalling aspects. study any possible interface impacts to UMTS networks. This work item is intend

38、ed only for ITU region 1 and is inline with ECC Decision (ECC/DEC/(05)05) of 18 March 2005 on harmonized utilization of spectrum for IMT-2000/UMTS systems operating within the band 2 500 - 2 690 MHz, and ECC Decision (ECC/DEC/(06)01) of 24 March 2006 on the harmonized utilization of spectrum for ter

39、restrial IMT-2000/UMTS systems operating within the bands 1 900 - 1 980 MHz, 2 010 - 2 025 MHz and 2 110 - 2 170 MHz. 5 Frequency arrangements 5.1 Frequency bands UTRA FDD 2,6 GHz DL external is designed to operate in the following paired bands: Operating Band XV: - 1 900 - 1 920 MHz (UE transmit, N

40、ode B receive); - 2 600 - 2 620 MHz (UE receive, Node B transmit); - operating with a fixed TX-RX frequency separation of 700 MHz. Operating Band XVI: - 2 010 - 2 025 MHz (UE transmit, Node B receive); - 2 585 - 2 600 MHz (UE receive, Node B transmit); - operating with a fixed TX-RX frequency separa

41、tion of 575 MHz. The band gap between the downlink of Operating Band XVI and the uplink of Operating Band VII is 15 MHz. ETSI ETSI TR 102 736 V7.0.0 (2007-09) 8 6 Deployment aspects 6.1 Co-existence in the band 6.1.1 Co-existence with IMT-2000 There are extensive co-existence studies performed betwe

42、en UTRA systems for Band I, with the uplink at 1 920 MHz -1980 MHz and downlink at 2 110 MHz - 2 170 MHz 6. As is concluded for UMTS2600 in 3, such studies are “re-usable“ also for a system with a downlink at 2 600 MHz, in spite of the difference in propagation between bands. Co-existence studies be

43、tween UTRA and cdma2000 were also performed for Bands II and III. Also those studies are “re-usable“ for UMTS 2,6 GHz downlink (external). Since the existing co-existence studies in other bands can be re-used, the relevant adjacent channel receiver and transmitter parameters should be adopted from t

44、hose existing bands. 6.1.2 Co-existence with GSM Co-existence with GSM in the band has not been stated as a requirement for 2,6 GHz downlink external, although Single Carrier TDMA (UWC136) is an IMT-2000 technology. 6.1.3 Co-existence with TDD As already indicated in 1 and 2 and also established as

45、a working assumption in MSG, it is assumed that an administration would not implement mixed FDD/TDD in the bands for UMTS 2,6 GHz downlink (external). 6.2 Co-existence with adjacent bands 6.2.1 Uplink bands 1 900 MHz - 1 920 MHz and 2 010 MHz - 2 025 MHz The uplink bands for UMTS 2,6 GHz FDD downlin

46、k (external) are part of the bands assigned for IMT-2000 in ERC/DEC(97)07, now replaced by ECC/DEC/(06)01 2. Compatibility between UMTS and services in bands adjacent to these uplink bands was studied in ERC Report 65 5 as illustrated in figure 6.2.1. The relevant adjacent band services are (numbers

47、 in brackets refer to figure 6.2.1): DECT operating adjacent to 1 900 MHz (1). UMTS operating adjacent to 1 920 MHz. MSS (UMTS-S) operating adjacent to 2 010 MHz (3). Fixed Services it will be reduced to 3,0 MHz if only FDD uplink is considered. Space Services at 2 025 MHz (4): The table entries app

48、ly for FDD uplink. Fixed Services at 2 025 MHz (4): The table entries and statement on co-ordination apply to the downlink of TDD. They do therefore not apply for FDD uplink at 2 025 MHz. For adjacent band compatibility between UTRA FDD uplinks at 1 920 MHz, the existing compatibility studies betwee

49、n adjacent UTRA systems in Band I 6 apply also here. The overall conclusion for FDD uplink at 1 900 - 1 920 MHz and 2 010 -2 025 MHz is that since existing studies of adjacent band compatibility for UTRA FDD and TDD apply as outlined above, the relevant uplink adjacent band parameters should be adopted for the new uplink bands from those existing bands. Note that parameters such as ACLR and spectrum mask limits are fundamentally the same for UTRA FDD and TDD. 6.2.2 Downlink band 2 57