ETSI EN 300 392-12-10-2004 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) Part 12 Supplementary services stage 3 Sub-part 10 Priority Call (PC) (V1 2 1)《陆地集群无线电(TETRA) 语音加_1.pdf

《ETSI EN 300 392-12-10-2004 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) Part 12 Supplementary services stage 3 Sub-part 10 Priority Call (PC) (V1 2 1)《陆地集群无线电(TETRA) 语音加_1.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 300 392-12-10-2004 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) Part 12 Supplementary services stage 3 Sub-part 10 Priority Call (PC) (V1 2 1)《陆地集群无线电(TETRA) 语音加_1.pdf（45页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 300 392-12-10 V1.2.1 (2004-02)European Standard (Telecommunications series) Terrestrial Trunked Radio (TETRA);Voice plus Data (V+D);Part 12: Supplementary services stage 3;Sub-part 10: Priority Call (PC)ETSI ETSI EN 300 392-12-10 V1.2.1 (2004-02) 2 Reference REN/TETRA-03122 Keywords radio,

2、TETRA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document

3、 can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute,

4、the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI d

5、ocuments is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to repr

6、oduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Me

7、mbers. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 300 392-12-10 V1.2.1 (2004-02) 3 Contents Intellectual Property Rights5 Foreword.5 1 Scope 7 2 References 7 3 Definitions and abbreviations.8 3.1 Definitions8 3.2 Abb

8、reviations .8 4 SS-PC stage 3 specification9 4.1 General .9 4.2 SS-PC services offered over the TNSS-SAP9 4.2.1 DEFINE request10 4.2.2 DEFINE indication .10 4.2.3 ASSIGN indication.11 4.2.4 ASSIGN response.11 4.2.5 INTERROGATE request11 4.2.6 INTERROGATE indication12 4.3 SS-PC services offered over

9、the TNCC-SAP.12 4.3.1 PRIORITY1 request - SS-PC invocation12 4.3.2 PRIORITY2 confirm/indication - SS-PC operation .12 4.4 Void13 4.5 Parameter descriptions .13 5 SS-PC protocol description 14 5.1 General .14 5.2 SS-PC protocol states .14 5.2.1 Protocol states of FE1.15 5.2.2 Protocol states of CCA t

10、o which FE1 is collocated 15 5.2.2.1 State IDLE.15 5.2.2.2 MO_CALL_SETUP15 5.2.3 Protocol states of FE21.15 5.2.3.1 State IDLE.15 5.2.4 Protocol states of CC to which FE21 is collocated.16 5.2.4.1 State ANY-STATE .16 5.2.4.2 State SETUP-STARTED 16 5.2.5 Protocol states of FE3.16 5.2.6 Protocol state

11、s of visited SwMI FE25.16 5.2.7 Protocol states of CC to which FE25 is collocated.17 5.2.7.1 State ANY-STATE .17 5.2.7.2 State SETUP-STARTED 17 5.2.8 Protocol states of CCA to which FE5 is collocated 17 5.2.8.1 ANY STATE.17 5.3 SS-PC Signalling Procedures .17 5.3.1 Procedures for FE1 .17 5.3.2 Proce

12、dures for FE21 .18 5.3.2.1 Definition in FE21 18 5.3.2.2 Distribution in FE2118 5.3.2.3 Interrogation in FE21 18 5.3.3 Procedures for CC to which FE21 is collocated .19 5.3.3.1 Verification of priority in CC to which FE21 is collocated 19 5.3.4 Procedures for FE3 .19 5.3.4.1 Verification in FE319 5.

13、3.5 Procedures for visited SwMI FE25.20 5.4 PDU Descriptions.20 5.4.1 ASSIGN PDU.20 ETSI ETSI EN 300 392-12-10 V1.2.1 (2004-02) 4 5.4.2 ASSIGN ACK PDU21 5.4.3 DEFINE 21 5.4.4 DEFINE-ACK 22 5.4.5 INTERROGATE 22 5.4.6 INTERROGATE-ACK.23 5.4.7 Priority 1 and Priority 2 23 5.4.7.1 D-CONNECT PDU.23 5.4.7

14、.2 D-SETUP 23 5.4.7.3 U-SETUP 23 5.4.8 Void 23 5.5 Information element coding .23 5.5.1 Basic Service 24 5.5.2 Call priority.24 5.5.3 High priority value24 5.5.4 Low priority value 25 5.5.5 Number of SS-PC definitions .25 5.5.6 Range type 25 5.5.7 Result for definition25 5.5.8 Result for interrogati

15、on.26 5.5.9 SS-PC assignment.26 5.5.10 SS-PC definition .26 5.5.11 SS-PC PDU type.27 5.5.12 Subscriber extension present.27 5.5.13 Subscriber identity 27 6 SS-PC FE behaviour.28 6.1 Behaviour of FE1 (SS entity of user A) .29 6.1.1 Service interaction for FE1 .29 6.1.2 Process description for FE1 30

16、6.2 Behaviour of CCA to which FE1 is collocated 31 6.2.1 Service interaction for CCA to which FE1 is collocated 31 6.2.2 Process description for CCA to which FE1 is collocated .32 6.3 Behaviour of FE21 .33 6.3.1 Service interaction for FE21 .33 6.3.2 Process description for FE21 33 6.4 Behaviour of

17、CC to which FE21 is collocated .36 6.4.1 Service interaction for CC to which FE21 is collocated .36 6.4.2 Process description for CC to which FE21 is collocated 37 6.5 Behaviour of FE3 (SS entity of authorized user)38 6.5.1 Service interaction for FE3 .38 6.5.2 Process description for FE3 39 6.6 Beh

18、aviour of visited SwMI FE25.40 6.6.1 Service interaction for FE25 .40 6.6.2 Process description for visited SwMI FE2541 6.7 Behaviour of CCA to which FE5 is collocated 42 6.7.1 Service interaction for CCA to which FE5 is collocated 42 6.7.2 Process description for CCA to which FE5 is collocated .43

19、6.8 Inter-working considerations43 Annex A (informative): Mapping of SS-PC priorities received from the user application to priorities in basic service PDUs (for MS/LS) 44 A.1 Mapping of SS-PC priorities for circuit mode speech and data .44 Annex B (informative): Change Requests 45 History 46 ETSI E

20、TSI EN 300 392-12-10 V1.2.1 (2004-02) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in

21、 ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ET

22、SI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Forewor

23、d This European Standard (Telecommunications series) has been produced by ETSI Project Terrestrial Trunked Radio (TETRA). The present document is part 12 sub-part 10 of a multi-part deliverable covering Voice plus Data (V+D), as identified below: EN 300 392-1: “General network design“; EN 300 392-2:

24、 “Air Interface (AI)“; EN 300 392-3: “Interworking at the Inter-System Interface (ISI)“; ETS 300 392-4: “Gateways basic operation“; EN 300 392-5: “Peripheral Equipment Interface (PEI)“; EN 300 392-7: “Security“; EN 300 392-9: “General requirements for supplementary services“; EN 300 392-10: “Supplem

25、entary services stage 1“; EN 300 392-11: “Supplementary services stage 2“; EN 300 392-12: “Supplementary services stage 3“; EN 300 392-12-1: “Call Identification (CI)“; ETS 300 392-12-2: “Call Report (CR)“; EN 300 392-12-3: “Talking Party Identification (TPI)“; EN 300 392-12-4: “Call Forwarding (CF)

26、“; ETS 300 392-12-5: “List Search Call (LSC)“; EN 300 392-12-6: “Call Authorized by Dispatcher (CAD)“; ETS 300 392-12-7: “Short Number Addressing (SNA)“; EN 300 392-12-8: “Area Selection (AS)“; ETS 300 392-12-9: “Access Priority (AP)“; EN 300 392-12-10: “Priority Call (PC)“; ETS 300 392-12-11: “Call

27、 Waiting (CW)“; EN 300 392-12-12: “Call Hold (HOLD)“; ETSI ETSI EN 300 392-12-10 V1.2.1 (2004-02) 6 ETS 300 392-12-13: “Call Completion to Busy Subscriber (CCBS)“; EN 300 392-12-14: “Late Entry (LE)“; ETS 300 392-12-16: “Pre-emptive Priority Call (PPC)“; EN 300 392-12-17: “Include Call (IC)“; EN 300

28、 392-12-18: “Barring of Outgoing Calls (BOC)“; EN 300 392-12-19: “Barring of Incoming Calls (BIC)“; ETS 300 392-12-20: “Discreet Listening (DL)“; EN 300 392-12-21: “Ambience Listening (AL)“; EN 300 392-12-22: “Dynamic Group Number Assignment (DGNA)“; ETS 300 392-12-23: “Call Completion on No Reply (

29、CCNR)“; ETS 300 392-12-24: “Call Retention (CRT)“; ETS 300 392-13: “SDL model of the Air Interface (AI)“; ETS 300 392-14: “Protocol Implementation Conformance Statement (PICS) proforma specification“; TS 100 392-15: “TETRA frequency bands, duplex spacings and channel numbering“; TS 100 392-16: “Netw

30、ork Performance Metrics“; TS 100 392-17: “TETRA V+D and DMO Release 1.1 specifications“. National transposition dates Date of adoption of this EN: 6 February 2004 Date of latest announcement of this EN (doa): 31 May 2004 Date of latest publication of new National Standard or endorsement of this EN (

31、dop/e): 30 November 2004 Date of withdrawal of any conflicting National Standard (dow): 30 November 2004 ETSI ETSI EN 300 392-12-10 V1.2.1 (2004-02) 7 1 Scope The present document defines the stage 3 specifications of the Supplementary Service Priority Call (SS-PC) for the Terrestrial Trunked RAdio

32、(TETRA). The SS-PC enables a user to have preferential access to the network resources in the TETRA system in times of congestion. The SS-PC applies for the basic services: circuit mode calls (speech or data). The SS-PC specifies the definition, activation, deactivation and interrogation for the usa

33、ge of low and high call priorities in the TETRA system. The operations are defined for the Switching and Management Infrastructure (SwMI), for the Mobile Station (MS) and for the Line Station (LS). SS-PC can be defined to subscribers of one TETRA system, but the subscribers can be located in several

34、 TETRA systems and the information flows can be delivered over the Inter System Interface (ISI). SS-PC can also be invoked for basic services within one TETRA system or for basic services that extend over ISI to several TETRA systems. The pre-emptive priorities are outside of the scope of the presen

35、t document. Man-Machine Interface (MMI) and Charging principles are outside the scope of the present document. Supplementary Service stage 3 specification is preceded by the stage 1 and the stage 2 specifications of the service. Stage 1 describes the functional capabilities from the users point of v

36、iew. Stage 2 defines the functional behaviour in terms of Functional Entities (FEs) and information flows. Stage 3 gives a precise description of the Supplementary Service from the implementation point of view. It defines the protocol for the service and the encoding rules for the information flows.

37、 It defines the processes for the functional entities and their behaviour. The described protocols and behaviour apply to the SwMI, for the MS and for the LS and can be applied over the ISI between TETRA systems. Aspects relating to all supplementary services are detailed in EN 300 392-9 2. 2 Refere

38、nces The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revis

39、ions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. 1 ETSI EN 300 392-2: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); P

40、art 2: Air Interface (AI)“. 2 ETSI EN 300 392-9: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 9: General requirements for supplementary services“. 3 ETSI EN 300 392-1: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 1: General network design“. 4 ITU-T Recommendatio

41、n Z.100: “Specification and Description Language (SDL)“. 5 ISO/IEC 11574 (2000): “Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Circuit-mode 64 kbit/s bearer services - Service description, functional capabilities and inf

42、ormation flows“. 6 ETSI EN 300 392-3-1: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 1: General design“. ETSI ETSI EN 300 392-12-10 V1.2.1 (2004-02) 8 3 Definitions and abbreviations 3.1 Definitions For the purposes of

43、the present document, the following terms and definitions apply: authorized user: user who is authorized to define, activate, deactivate and interrogate the SS-PC Functional Entity (FE): specifies the functional characteristics of the SS sub-entity within an MS, a LS or a SwMI related to an SS-PC ac

44、tion, e.g. management or operational functions of SS-PC home system: TETRA system to which the subscriber identity is permanently defined management functions: management functions for SS-PC are definition, activation, deactivation and interrogation priority level: pre-agreed value allocated to each

45、 mobile Individual TETRA Subscriber Identity (ITSI) or Group TETRA Subscriber Identity (GTSI) on a per call basis NOTE: It is used to determine priority access to network resources in the event of network congestion. Switching and Management Infrastructure (SwMI): all of the TETRA equipment for a Vo

46、ice plus Data (V+D) network except for subscriber terminals NOTE: The SwMI enables subscriber terminals to communicate with each other via the SwMI. system 1: TETRA system to which SS-PC is defined, activated, deactivated and interrogated and in which SS-PC can be invoked and operated system 2: TETR

47、A system through which SS-PC definition, activation, deactivation and interrogation can be delivered. SS-PC can also be invoked and operated in system 2 user A: calling party which invokes SS-PC user B: called party in a call in which SS-PC is operated 3.2 Abbreviations For the purposes of the prese

48、nt document, the following abbreviations apply: CC basic service Call Control functional entity CCA basic service Call Control functional entity Agent NOTE: CC and CCA are applied as defined in ISO/IEC 11574 5. GTSI Group TETRA Subscriber Identity ITSI Individual TETRA Subscriber Identity LS Line St

49、ation MS Mobile Station SDL Specification and Description Language SS Supplementary Service NOTE: The abbreviation SS is only used when referring to a specific supplementary service. SS-PC Priority Call SwMI Switching and Management Infrastructure TETRA Terrestrial Trunked Radio ETSI ETSI EN 300 392-12-10 V1.2.1 (2004-02) 9 4 SS-PC stage 3 specification 4.1 General This clause describes the SS-PC services offered by Supplementary Service (SS) and call control sub-entities of CMCE of the TETRA voice plus data layer 3 service boundary in the MS/LS. The SS-P