ETSI EN 300 392-12-1-2007 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) Part 12 Supplementary services stage 3 Sub-part 1 Call Identification (CI) (V1 2 2)《陆地集群无线电(TETRA).pdf

《ETSI EN 300 392-12-1-2007 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) Part 12 Supplementary services stage 3 Sub-part 1 Call Identification (CI) (V1 2 2)《陆地集群无线电(TETRA).pdf》由会员分享，可在线阅读，更多相关《ETSI EN 300 392-12-1-2007 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) Part 12 Supplementary services stage 3 Sub-part 1 Call Identification (CI) (V1 2 2)《陆地集群无线电(TETRA).pdf（56页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 300 392-12-1 V1.2.2 (2007-08)European Standard (Telecommunications series) Terrestrial Trunked Radio (TETRA);Voice plus Data (V+D);Part 12: Supplementary services stage 3;Sub-part 1: Call Identification (CI)ETSI ETSI EN 300 392-12-1 V1.2.2 (2007-08) 2 Reference REN/TETRA-03185-12-1 Keywords

2、 CLIP, CLIR, COLP, COLR, TETRA, V+D ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual

3、copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Form

4、at (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current s

5、tatus of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced ex

6、cept as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2007. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPH

7、ONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 300 392-12-1 V1.2.2 (2007-08) 3 Contents Intellectual Property Rig

8、hts7 Foreword.7 Introduction 8 1 Scope 9 2 References 10 3 Definitions, symbols and abbreviations .11 3.1 Definitions11 3.2 Symbols11 3.3 Abbreviations .11 4 Signalling protocol for the support of SS-CLIP and SS-CLIR 12 4.1 SS-CLIP and SS-CLIR description 12 4.1.1 SS-CLIP service description.12 4.1.

9、1.1 General12 4.1.1.2 SS-CLIP services offered over the TNSS-SAP.12 4.1.1.3 INFORM1 indication 13 4.1.2 Parameter description .13 4.1.3 SS-CLIR description.13 4.1.3.1 General13 4.1.3.2 SS-CLIR services offered over the TNSS-SAP 14 4.1.3.2.1 INVOCATION request .14 4.1.3.2.2 INFORM2 indication.14 4.1.

10、3.2.3 INFORM3 indication.14 4.1.4 Parameter description .15 4.2 SS-CLIP and SS-CLIR operational requirements 15 4.2.1 SS-CLIP operational requirements .15 4.2.1.1 Served user MS/LS .15 4.2.1.2 Originating SwMI .15 4.2.1.3 Group controlling SwMI .15 4.2.1.4 Terminating SwMI15 4.2.2 SS-CLIR operationa

11、l requirements.16 4.2.2.1 Served user MS/LS .16 4.2.2.2 Originating SwMI .16 4.2.2.3 Group controlling SwMI .16 4.2.2.4 Terminating SwMI16 4.3 SS-CLIP and SS-CLIR coding requirements .16 4.3.1 General on coding.16 4.3.2 SS-CLIP and SS-CLIR PDUs.17 4.3.2.1 U-SETUP PDU .17 4.3.2.2 EXTERNAL NUMBER PDU.

12、17 4.3.3 TETRA PDU information element coding for SS-CLIP and SS-CLIR17 4.3.3.1 U-SETUP CLIR (RESTRICT)17 4.3.3.2 Notification indicator information element.17 4.3.3.3 Numbering plan identifier .17 4.3.3.4 Type of number.17 4.3.3.5 Screening indicator17 4.3.3.6 INFORM2 CLIR OVERRIDE PDU.17 4.3.3.7 I

13、NFORM3 CLIR OVERRIDE PDU.18 4.3.3.8 SS-CLIR PDU Type18 4.3.4 Messages.18 4.4 SS-CLIP and SS-CLIR state definitions.18 4.4.1 SS-CLIP state definitions18 4.4.1.1 States at the served user MS/LS18 4.4.1.2 States for SS-CLIP invocation and operation at the group controlling SwMI 19 ETSI ETSI EN 300 392-

14、12-1 V1.2.2 (2007-08) 4 4.4.1.3 States for SS-CLIP invocation and operation at the served user SwMI 19 4.4.2 SS-CLIR state definitions .19 4.4.2.1 States at the served user MS/LS19 4.4.2.2 States for SS-CLIR invocation and operation at the group controlling SwMI19 4.4.2.3 States for SS-CLIR invocati

15、on and operation at the served user SwMI19 4.5 SS-CLIP and SS-CLIR signalling procedures20 4.5.1 SS-CLIP signalling procedures.20 4.5.1.1 Actions at the originating SwMI for SS-CLIP 20 4.5.1.1.1 Normal procedures 20 4.5.1.1.2 Exceptional procedures20 4.5.1.2 Actions at the terminating for SS-CLIP 20

16、 4.5.1.3 Normal procedures20 4.5.1.4 Actions at the group controlling SwMI.21 4.5.1.5 Actions at the participating SwMI 21 4.5.1.6 Exceptional procedures .21 4.5.2 SS-CLIR signalling procedures 21 4.5.2.1 Actions at the originating SwMI for SS-CLIR21 4.5.2.1.1 Normal procedures 21 4.5.2.1.2 Exceptio

17、nal procedures21 4.5.2.2 Actions at the terminating SwMI 21 4.5.2.3 Exceptional procedures .22 4.5.3 SS-CLIP and SS-CLIR impact of interworking22 4.5.3.1 SS-CLIP 22 4.5.3.2 SS-CLIR23 4.6 Protocol interactions between SS-CLIP and SS-CLIR and other supplementary services and ANFs24 4.6.1 Interaction o

18、f SS-CLIR with SS-CLIP .24 4.6.2 Talking party identification.24 4.6.2.1 With SS-CLIP .24 4.6.2.2 With SS-CLIR.24 4.6.3 Interactions with ISI Mobility Management (ANF-ISIMM) of SS-CLIP.24 4.6.3.1 SS-CLIP profiles .25 4.6.3.1.1 SS-CLIP information.25 4.6.3.1.2 SS-CLIP migration original profile .25 4

19、.6.3.2 SS-CLIP migration original profile response information element.25 4.6.3.3 Operation of Interaction with ISI MM of SS-CLIP.26 4.6.4 Interactions of SS-CLIR with ISI Mobility Management (ANF-ISIMM) 26 4.6.4.1 SS-CLIR Profiles 26 4.6.4.1.1 SS-CLIR information 26 4.6.4.1.2 SS-CLIR migration orig

20、inal profile.26 4.6.4.2 SS-CLIR migration original profile response information element 27 4.6.4.3 Operation of Interaction of SS-CLIR with ISI MM. .27 4.7 SS-CLIP and SS-CLIR parameter values (timers) .27 5 Signalling protocol for the support of SS-COLP and SS-COLR .27 5.1 SS-COLP and SS-COLR descr

21、iption .27 5.1.1 SS-COLP description28 5.1.1.1 General28 5.1.1.2 SS-COLP services offered over the TNSS-SAP .28 5.1.1.3 INFORM4 indication 28 5.1.2 Parameter description .28 5.1.3 SS-COLR description .29 5.1.3.1 General29 5.1.3.2 SS-COLR services offered over the TNSS-SAP.29 5.1.3.2.1 INVOCATION req

22、uest .30 5.1.3.2.2 INFORM5 indication.30 5.1.3.2.3 INFORM6 indication.30 5.1.4 Parameter description .30 5.2 SS-COLP and SS-COLR operational requirements .31 5.2.1 SS-COLP operational requirements31 5.2.1.1 Served user MS/LS .31 5.2.1.2 Originating SwMI .31 5.2.1.3 Terminating SwMI31 ETSI ETSI EN 30

23、0 392-12-1 V1.2.2 (2007-08) 5 5.2.2 SS-COLR operational requirements .32 5.2.2.1 Served user MS/LS .32 5.2.2.2 Originating SwMI .32 5.2.2.3 Terminating SwMI32 5.3 SS-COLP and SS-COLR coding requirements 32 5.3.1 General on coding.32 5.3.2 SS-COLP coding requirements.32 5.3.2.1 SS-COLP PDU32 5.3.2.1.

24、1 EXTERNAL NUMBER PDU .32 5.3.2.1.2 INFORM4 COLP PRESENTATION PDU.32 5.3.2.2 TETRA PDU information element coding33 5.3.2.2.1 Connected line identification information elements 33 5.3.2.2.2 Numbering plan identifier information element 33 5.3.2.2.3 Screening Indicator information element 33 5.3.2.2.

25、4 Type of Number information element .33 5.3.2.3 Operations .33 5.3.3 SS-COLR coding requirements 34 5.3.3.1 SS-COLR PDUs34 5.3.3.1.1 INVOKE COLR 34 5.3.3.1.2 INFORM5 COLR OVERRIDE PDU34 5.3.3.1.3 INFORM6 COLR OVERRIDE PDU34 5.3.3.1.4 TETRA PDU information element coding 35 5.3.3.1.5 Connected user

26、identification information elements .35 5.3.3.1.6 SS-COLR requested by connected user information element .35 5.3.3.1.7 Screening indicator air interface information element.35 5.3.3.2 Operations .35 5.4 SS-COLP and SS-COLR state definitions35 5.5 SS-COLP and SS-COLR signalling procedures.36 5.5.1 S

27、S-COLP 36 5.5.1.1 Actions at the originating SwMI for SS-COLP.36 5.5.1.1.1 Normal procedures 36 5.5.1.1.2 Exceptional procedures36 5.5.1.2 Actions at the group controlling SwMI.36 5.5.1.3 Actions at the terminating SwMI for SS-COLP36 5.5.1.3.1 Normal procedures 36 5.5.1.3.2 Exceptional procedures37

28、5.5.2 SS-COLR37 5.5.2.1 Actions at the served/connected user for SS-COLR .37 5.5.2.2 Actions at the originating SwMI for SS-COLR 37 5.5.2.3 Actions at the group controlling SwMI for SS-COLR37 5.5.2.4 Actions at the terminating SwMI for SS-COLR .37 5.5.2.4.1 Normal procedures 37 5.5.2.4.2 Exceptional

29、 procedures38 5.5.3 SS-COLP and SS-COLR impact of interworking.38 5.5.3.1 SS-COLP.38 5.5.3.2 SS-COLR 38 5.6 Protocol interactions between SS-COLP and SS-COLR and other supplementary services and ANFs 39 5.6.1 Interaction of SS-COLP with SS-COLR 39 5.6.2 Talking party identification.39 5.6.2.1 With S

30、S-COLP39 5.6.2.2 With SS-COLR .39 5.6.3 Call forward unconditional .40 5.6.3.1 With SS-COLP40 5.6.3.2 With SS-COLR .40 5.6.4 Call authorized by dispatcher40 5.6.5 Discreet listening 40 5.6.6 Ambience listening .41 5.6.7 Interactions with ISI Mobility Management (ANF-ISIMM) of SS-COLP and SS-COLR.41

31、5.6.7.1 SS-COLP Profiles .41 5.6.7.1.1 SS-COLP information .41 5.6.7.1.2 SS-COLP migration original profile41 5.6.7.1.3 SS-COLP migration original profile response information element .42 ETSI ETSI EN 300 392-12-1 V1.2.2 (2007-08) 6 5.6.8 Operations of SS-COLP with ISI Mobility Management (ANF-ISIMM

32、) 42 5.6.8.1 Profile sending requirements.42 5.6.8.2 SS-COLR profiles .42 5.6.8.2.1 SS-COLR information.42 5.6.8.2.2 SS-COLR migration original profile .43 5.6.8.2.3 SS-COLR migration original profile response information element .43 5.6.8.3 Operations of SS-COLR with ISI Mobility Management (ANF-IS

33、IMM) 43 5.7 SS-COLP and SS-COLR parameter values (timers) 44 6 Common SS-CI Elements 44 6.1 General on common coding requirements44 6.2 PDU type information element contents 44 Annex A (normative): External subscriber numbers in support of Call Identification Supplementary Services 45 A.1 External n

34、umber PDU in support of SS-CLIP .45 A.2 External number parameters COLP PDU in support of SS-COLP 45 A.3 Information elements46 A.3.1 Numbering plan identifier information element .46 A.3.2 Type of number information element.46 A.3.3 Screening indicators information element46 Annex B (informative):

35、Specification and Description Language (SDL) representation of procedures 47 B.1 SDL representation of SS-CLIP at the terminating SwMI.47 B.2 SDL representation of SS-CLIR procedure49 B.3 SDL representation of SS-CLIR at the originating SwMI .50 B.4 SDL representation of SS-COLP at the originating S

36、wMI 51 B.5 SDL representation of SS-COLR procedure 52 B.6 SDL representation of SS-COLR process at the originating SwMI.53 Annex C (informative): Bibliography.54 Annex D (informative): Change Requests55 History 56 ETSI ETSI EN 300 392-12-1 V1.2.2 (2007-08) 7 Intellectual Property Rights IPRs essenti

37、al or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially

38、 Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by

39、ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Te

40、chnical Committee Terrestrial Trunked Radio (TETRA). The present document is part 12, sub-part 1 of a multi-part deliverable covering the Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D), as identified below: EN 300 392-1: “General network design“; EN 300 392-2: “Air Interface (AI)“; EN 300

41、392-3: “Interworking at the Inter-System Interface (ISI)“; ETS 300 392-4: “Gateways basic operation“; EN 300 392-5: “Peripheral Equipment Interface (PEI)“; EN 300 392-7: “Security“; EN 300 392-9: “General requirements for supplementary services“; EN 300 392-10: “Supplementary services stage 1“; EN 3

42、00 392-11: “Supplementary services stage 2“; EN 300 392-12: “Supplementary services stage 3“; EN 300 392-12-1: “Call Identification (CI)“; ETS 300 392-12-2: “Call Report (CR)“; EN 300 392-12-3: “Talking Party Identification (TPI)“; EN 300 392-12-4: “Call Forwarding (CF)“; ETS 300 392-12-5: “List Sea

43、rch Call (LSC)“; EN 300 392-12-6: “Call Authorized by Dispatcher (CAD)“; ETS 300 392-12-7: “Short Number Addressing (SNA)“; EN 300 392-12-8: “Area Selection (AS)“; ETS 300 392-12-9: “Access Priority (AP)“; EN 300 392-12-10: “Priority Call (PC)“; ETS 300 392-12-11: “Call Waiting (CW)“; EN 300 392-12-

44、12: “Call Hold (HOLD)“; ETSI ETSI EN 300 392-12-1 V1.2.2 (2007-08) 8 ETS 300 392-12-13: “Call Completion to Busy Subscriber (CCBS)“; EN 300 392-12-14: “Late Entry (LE)“; EN 300 392-12-16: “Pre-emptive Priority Call (PPC)“; EN 300 392-12-17: “Include Call (IC)“; EN 300 392-12-18: “Barring of Outgoing

45、 Calls (BOC)“; EN 300 392-12-19: “Barring of Incoming Calls (BIC)“; ETS 300 392-12-20: “Discreet Listening (DL)“; EN 300 392-12-21: “Ambience Listening (AL)“; EN 300 392-12-22: “Dynamic Group Number Assignment (DGNA)“; ETS 300 392-12-23: “Call Completion on No Reply (CCNR)“; ETS 300 392-12-24: “Call

46、 Retention (CRT)“; ETS 300 392-13: “SDL model of the Air Interface (AI)“; ETS 300 392-14: “Protocol Implementation Conformance Statement (PICS) proforma specification“; TS 100 392-15: “TETRA frequency bands, duplex spacing and channel numbering“; TS 100 392-16: “Network Performance Metrics“; TS 100

47、392-17: “TETRA V+D and DMO specifications“; TS 100 392-18: “Air interface optimized applications“. NOTE: Part 10, sub-part 15 (Transfer of control), part 13 (SDL) and part 14 (PICS) of this multi-part deliverable are in status “historical“ and are not maintained. National transposition dates Date of

48、 adoption of this EN: 17 August 2007 Date of latest announcement of this EN (doa): 30 November 2007 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 May 2008 Date of withdrawal of any conflicting National Standard (dow): 31 May 2008 Introduction The present d

49、ocument corrects editorial mistakes identified in V1.2.1. ETSI ETSI EN 300 392-12-1 V1.2.2 (2007-08) 9 1 Scope The present document specifies the stage 3 description of the Supplementary Services CLIP, CLIR and COLP all part of Call Identification for the Terrestrial Trunked Radio (TETRA). The term “Line“ is used in the present document to design either the line of a “LS“ Line Station or by extension the TETRA Air Interface. NOTE 1: In order to use the same name for supplementary services as ECMA. Calling Line Identification Presentation (SS-CLIP) is a supplementary service whic