EN 61784-5-12-2012 en Industrial communication networks - Profiles - Part 5-12 Installation of fieldbuses - Installation profiles for CPF 12 (Incorporates Amendment A1 2015).pdf

《EN 61784-5-12-2012 en Industrial communication networks - Profiles - Part 5-12 Installation of fieldbuses - Installation profiles for CPF 12 (Incorporates Amendment A1 2015).pdf》由会员分享，可在线阅读，更多相关《EN 61784-5-12-2012 en Industrial communication networks - Profiles - Part 5-12 Installation of fieldbuses - Installation profiles for CPF 12 (Incorporates Amendment A1 2015).pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationIndustrial communication networks ProfilesPart 5-12: Installation of fieldbuses Installation profiles for CPF 12BS EN 61784-5-12:2012BS EN 61784-5-12:2012+A1:2015BS EN 61784-5-12:2012+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of

2、EN 61784-5-12:2012+A1:2015. It is identical to IEC 61784-5-12:2010, incorporating amendment 1:2015. It supersedes BS EN 61784-5-12:2012, which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the

3、 number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by .The UK participation in its preparation was entrusted to Technical Committee AMT/7, Industrial communications: process measurement and control, including fieldbus.A list of organizations represented on this c

4、ommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 90356 4ICS 25

5、.040.40; 35.100.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2012.Amendments/corrigenda issued since publicationDate Text affected31 October 2015 Imp

6、lementation of IEC amendment 1:2015 with CENELEC endorsement A1:2015. Annex ZA amendedEUROPEAN STANDARD EN 61784-5-12 NORME EUROPENNE EUROPISCHE NORM April 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elek

7、trotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61784-5-12:2012 E ICS 25.040.40; 35.100.40 English version Industrial communication networks - Profi

8、les - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 (IEC 61784-5-12:2010) Industrial communication networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 (CEI 61784-5-12:2010) Industrielle Kommunikationsnetze - Profile - Teil 5-12: F

9、eldbusinstallation - Installationsprofile fr die Kommunikationsprofilfamilie 12 (IEC 61784-5-12:2010) This European Standard was approved by CENELEC on 2011-10-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European St

10、andard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (

11、English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committee

12、s of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey

13、 and the United Kingdom. EN 61784-5-12:2012+A1September 2015EN 61784-5-12:2012 - 2 -Foreword The text of document 65C/602/FDIS, future edition 1 of IEC 61784-5-12, prepared by SC 65C, “Industrialnetworks“, of IEC/TC 65, “Industrial-process measurement, control and automation“ was submitted to the IE

14、C-CENELEC parallel vote and approved by CENELEC as EN 61784-5-12:2012.The following dates are fixed: latest date by which the document hasto be implemented at national level bypublication of an identical nationalstandard or by endorsement (dop) 2012-10-20 latest date by which the national standards

15、conflicting with the document have to be withdrawn(dow) 2014-10-19This standard is to be used in conjunction with IEC 61918, second edition (2010-07), together with theEuropean Common Modification published with EN 61918:2008.Attention is drawn to the possibility that some of the elements of this do

16、cument may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patentrights.Endorsement notice The text of the International Standard IEC 61784-5-12:2010 was approved by CENELEC as a European Standard without any modification. BS EN 61784

17、-5-12:2012EN 61784-5-12:2012 - 2 -Foreword The text of document 65C/602/FDIS, future edition 1 of IEC 61784-5-12, prepared by SC 65C, “Industrial networks“, of IEC/TC 65, “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC a

18、s EN 61784-5-12:2012. The following dates are fixed: latest date by which the document hasto be implemented at national level bypublication of an identical nationalstandard or by endorsement (dop) 2012-10-20 latest date by which the nationalstandards conflicting with the document have to be withdraw

19、n(dow) 2014-10-19 This standard is to be used in conjunction with IEC 61918, second edition (2010-07), together with the European Common Modification published with EN 61918:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CE

20、NELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement noticeThe text of the International Standard IEC 61784-5-12:2010 was approved by CENELEC as a European Standard without any modification.BS EN 61784-5-12:2012- 3 - EN 61784-5-12:2012Annex ZA(nor

21、mative)Normative references to international publicationswith their corresponding European publicationsThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the re

22、ferenceddocument (including any amendments) applies.NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HDapplies.Publication Year Title EN/HD YearIEC 61156-5 - Multicore and symmetrical pair/quad cablesfor digital communications -Par

23、t 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz -Horizontal floor wiring - Sectional specification- - IEC 61918 2010 Industrial communication networks -Installation of communication networks in industrial premises- - BS EN 61784-5-12:2012 2 BS EN 61784-5-12:2012+A

24、1:2015EN 61784-5-12:2012+A1:2015EN 61784-5-12:2012/A1:20152European forewordThe text of document 65C/768/CDV, future IEC 61784-5-12:2010/A1, prepared by SC 65C “Industrialnetworks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote an

25、d approved by CENELEC as EN 61784-5-12:2012/A1:2015.The following dates are fixed: latest date by which the document has to be implemented atnational level by publication of an identical nationalstandard or by endorsement(dop) 2016-04-22 latest date by which the national standards conflicting with t

26、he document have to be withdrawn(dow) 2018-07-22Attention is drawn to the possibility that some of the elements of this document may be the subject ofpatent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights.Endorsement noticeThe text of the Intern

27、ational Standard IEC 61784-5-12:2010/A1:2015 was approved by CENELEC as a European Standard without any modification. Foreword to amendment A1EN 61784-5-12:2012/A1:20152European forewordThe text of document 65C/768/CDV, future IEC 61784-5-12:2010/A1, prepared by SC 65C “Industrial networks“ of IEC/T

28、C 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-12:2012/A1:2015. The following dates are fixed: latest date by which the document has to be implemented atnational l vel by publication of an identical n

29、ational standard or by endorsement (dop) 2016-04-22 latest date by which the national standards conflicting withthe document have to be withdrawn(dow) 2018-07-22 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN s

30、hall not be held responsible for identifying any or all such patent rights. Endorsement noticeThe text of the International Standard IEC 61784-5-12:2010/A1:2015 was approved by CENELEC asa European Standard without any modification.EN 61784-5-12:2012/A1:20152European forewordThe text of document 65C

31、/768/CDV, future IEC 61784-5-12:2010/A1, prepared by SC 65C “Industrialnetworks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-12:2012/A1:2015.The following dates are fixed: latest date by wh

32、ich the document has to be implemented atnational level by publication of an identical nationalstandard or by endorsement(dop) 2016-04-22 latest date by which the national standards conflicting with the document have to be withdrawn(dow) 2018-07-22Attention is drawn to the possibility that some of t

33、he elements of this document may be the subject ofpatent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights.Endorsement notice The text of the International Standard IEC 61784-5-12:2010/A1:2015 was approved by CENELEC asa European Standard without

34、any modification.EN 61784-5-12:2012/A1:20153Annex ZA(normative)Normative references to international publicationswith their corresponding European publicationsThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For date

35、d references, only the edition cited applies. For undatedreferences, the latest edition of the referenced document (including any amendments) applies.NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),the relevant EN/HD applies.NOTE 2 Up-to-date in

36、formation on the latest versions of the European Standards listed in this annex isavailable here: www.cenelec.eu.Publication Year Title EN/HD YearReplacement in Annex ZA of EN 61784-5-12:2012:IEC 61918 (mod) 2013 Industrial communication networks -Installation of communication networks in industrial

37、 premisesEN 61918 2013- - + AC 2014Addition to Annex ZA of EN 61784-5-12:2012:IEC 60603-7-3 - Connectors for electronic equipment -Part 7-3: Detail specification for 8-way,shielded, free and fixed connectors, fordata transmission with frequencies up to 100 MHzEN 60603-7-3 -IEC 60793-2 series Optical

38、 fibres -Part 2: Product specificationsEN 60793-2 seriesEN 61784-5-12:2012/A1:20153Annex ZA(normative)Normative references to international publicationswith their corresponding European publicationsThe following documents, in whole or in part, are normatively referenced in this document and are indi

39、spensable for its application. For dated references, only the edition cited applies. For undatedreferences, the latest edition of the referenced document (including any amendments) applies.NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),the rele

40、vant EN/HD applies.NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex isavailable here: www.cenelec.eu.Publication Year Title EN/HD YearReplacement in Annex ZA of EN 61784-5-12:2012:IEC 61918 (mod) 2013 Industrial communication networks -Installation

41、of communication networks in industrial premisesEN 61918 2013- - + AC 2014Addition to Annex ZA of EN 61784-5-12:2012:IEC 60603-7-3 - Connectors for electronic equipment -Part 7-3: Detail specification for 8-way,shielded, free and fixed connectors, fordata transmission with frequencies up to 100 MHzE

42、N 60603-7-3 -IEC 60793-2 series Optical fibres -Part 2: Product specificationsEN 60793-2 series- 3 - EN 61784-5-12:2012Annex ZA(normative)Normative references to international publicationswith their corresponding European publicationsThe following referenced documents are indispensable for the appli

43、cation of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenceddocument (including any amendments) applies.NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN

44、/HDapplies.Publication Year Title EN/HD YearIEC 61156-5 - Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz -Horizontal floor wiring - Sectional specification- -IEC 61918 2010 Industrial comm

45、unication networks -Installation of communication networks in industrial premises- -BS EN 61784-5-12:2012- 3 - EN 61784-5-12:2012Annex ZA(normative)Normative references to international publicationswith their corresponding European publicationsThe following referenced documents are indispensable for

46、 the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenceddocument (including any amendments) applies.NOTE When an international publication has been modified by common modifications, indicated by (mod), the r

47、elevant EN/HDapplies.Publication Year Title EN/HD Year IEC 61156-5 - Multicore and symmetrical pair/quad cables for digital communications -Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz -Horizontal floor wiring - Sectional specification- - IEC 61918 2010 Indu

48、strial communication networks -Installation of communication networks in industrial premises- - BS EN 61784-5-12:2012- 3 - EN 61784-5-12:2012Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are i

49、ndispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenceddocument (including any amendments) applies.NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HDapplies.Publication Year Title EN/HD YearIEC 61156-5 - Multicore and symmetrical pair/quad cablesfor digital communications -Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz -Horizontal floor