EN 61076-3-001-2008 en Connectors for electronic equipment - Product requirements - Part 3-001 Rectangular connectors - Blank detail specification《电子设备用连接器 产品要求 第3-001部分 矩形连接器 空白详细.pdf

《EN 61076-3-001-2008 en Connectors for electronic equipment - Product requirements - Part 3-001 Rectangular connectors - Blank detail specification《电子设备用连接器 产品要求 第3-001部分 矩形连接器 空白详细.pdf》由会员分享，可在线阅读，更多相关《EN 61076-3-001-2008 en Connectors for electronic equipment - Product requirements - Part 3-001 Rectangular connectors - Blank detail specification《电子设备用连接器 产品要求 第3-001部分 矩形连接器 空白详细.pdf（82页珍藏版）》请在麦多课文档分享上搜索。

1、Connectors forelectronic equipment Product requirements Part 3-001: Rectangular connectors Blank detail specificationBS EN 61076-3-001:2008raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsNational forewordThis British Standard is t

2、he UK implementation of EN 61076-3-001:2008.It is identical to IEC 61076-3-001:2008. It supersedes BS EN 61076-3-001:2000 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/48, Electromechanical components and mechanical struc-tures for electronic equi

3、pment.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. BSI 200ISBN 978 0 580 53940 4ICS 31.220.10Compliance with

4、a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61076-3-001:200892 2009February8EUROPEAN STANDA

5、RD EN 61076-3-001 NORME EUROPENNE EUROPISCHE NORM November 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - A

6、ll rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61076-3-001:2008 E ICS 31.220.10 Supersedes EN 61076-3-001:2000English version Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail spe

7、cification (IEC 61076-3-001:2008) Connecteurs pour quipements lectroniques - Exigences de produit - Partie 3-001: Connecteurs rectangulaires -Spcification particulire-cadre (CEI 61076-3-001:2008) Steckverbinder fr elektronische Einrichtungen - Produktanforderungen - Teil 3-001: Rechteckige Steckverb

8、inder - Vordruck fr Bauartspezifikation (IEC 61076-3-001:2008) This European Standard was approved by CENELEC on 2008-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standar

9、d without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other

10、language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic

11、, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61076-3-001:2008EN 61076-3-001:2008 2 Forewor

12、d The text of document 48B/1880/FDIS, future edition 2 of IEC 61076-3-001, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61076-3-001 on 20

13、08-10-01. This European Standard supersedes EN 61076-3-001:2000. EN 61076-3-001:2008 includes the following significant technical changes with respect to EN 61076-3-001:2000: this European Standard no longer includes the quality assessment procedures. As described in EN 61076-1 and EN 62197-1, a new

14、 document structure has been established. EN 61076-3-001 has been revised to match with this updated structure; Subclause 2.2 Systems of levels has been introduced; Subclause 2.5 IEC type designation has been removed following the decision according to 14.2 of the Berlin IEC/SC 48B Plenary meeting m

15、inutes (48B/1732/RM); Clauses 3 Dimensional Information and 4 Characteristics have been added; old Subclauses 4.2 to 4.4 have been moved to new Subclauses 5.3 to 5.5; Table 2 Number of test specimens and contacts has been inserted; test groups have been rearranged. Test group HP has been added. The

16、following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-10-01 Annex ZA has b

17、een added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61076-3-001:2008 was approved by CENELEC as a European Standard without any modification. _ BS EN 61076-3-001:2008 3 EN 61076-3-001:2008 Annex ZA (normative) Normative references to international publications with

18、their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Wh

19、en an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61076-1 2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification EN 61076-1 2006 IEC 61076-3 2008 Co

20、nnectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification EN 61076-3 2008 IEC 62197-1 2006 Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification EN 62197-1 2006 IEC Guide 109 - 1)Environmental a

21、spects - Inclusion in electrotechnical product standards - - IEC Guide 114 - 1)Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products - - 1)Undated reference. BS EN 61076-3-001:2008 2 61076-3-001 IEC:2008 CONTENTS INTRODUCTION.7

22、1 General information9 1.1 Scope9 1.2 Normative references 11 2 Technical information .13 2.1 Terms and definitions 13 2.2 Systems of levels 13 2.2.1 Performance levels13 2.2.2 Compatibility levels, according to IEC 61076-1:2006 .13 2.3 Classification into climatic categories 13 2.4 Clearance and cr

23、eepage distances15 2.5 Current-carrying capacity 15 2.6 Marking .15 3 Dimensional information .17 3.1 General .17 3.2 Isometric view and common features.17 3.2.1 Common features 19 3.2.2 Reference system19 3.3 Engagement (mating) information21 3.3.1 Engaging (mating) direction.21 3.3.2 Perpendicular

24、 to the engaging (mating) direction .21 3.3.3 Inclination21 3.4 Fixed connectors.21 3.4.1 Dimensions .21 3.4.2 Terminations .21 3.5 Free connectors 23 3.5.1 Dimensions .23 3.5.2 Terminations .23 3.6 Accessories.23 3.7 Mounting information for connectors23 3.7.1 Mounting on panels .25 3.8 Gauges .25

25、3.8.1 Sizing gauges and retention force gauges .25 3.8.2 Mechanical function, engaging/separating/insertion/withdrawal force gauges 27 3.8.3 Probes.27 3.8.4 Contact resistance gauge 27 3.8.5 Test panel (for voltage proof test)27 3.8.6 Test panel (for EMC/crosstalk, etc.).27 4 Characteristics .29 4.1

26、 General .29 4.2 Pin assignment and other definitions .29 4.3 Classification into climatic categories 29 4.4 Electrical characteristics29 4.4.1 Creepage and clearance distances29 BS EN 61076-3-001:200861076-3-001 IEC:2008 3 4.4.2 Voltage proof.31 4.4.3 Current-carrying capacity.31 4.4.4 Contact and

27、shield resistance31 4.4.5 Insulation resistance31 4.4.6 Impedance.33 4.4.7 Transmission characteristics33 4.5 Mechanical characteristics 37 4.5.1 Mechanical operation 37 4.5.2 Effectiveness of connector coupling devices37 4.5.3 Engaging and separating forces (or insertion and withdrawal forces).37 4

28、.5.4 Contact retention in insert37 4.5.5 Polarizing and coding method37 4.6 Other characteristics .39 4.6.1 Shock and vibration (method either random or sine) 39 4.6.2 Degree of protection provided by enclosures (IP-code)39 4.6.3 Screen and shielding properties 39 4.7 Environmental aspects 41 4.7.1

29、Marking of insulation material (plastics).41 4.7.2 Design/use of material.41 5 Test schedule.43 5.1 General .43 5.1.1 Climatic category.43 5.1.2 Creepage and clearance distances45 5.1.3 Arrangement for contact resistance measurement .45 5.1.4 Arrangement for dynamic stress tests45 5.1.5 Arrangement

30、for testing static load, axial .45 5.1.6 Wiring of specimens 45 5.2 Test schedules 47 5.2.1 Basic (minimum) test schedule 47 5.2.2 Full test schedule 53 5.3 Test procedures and measuring methods 77 5.4 Pre-conditioning 77 5.5 Wiring and mounting of specimens 77 5.5.1 Wiring77 5.5.2 Mounting .77 Anne

31、x A (normative) New tests and additional test phases 78 Table 1 Performance levels .13 Table 2 Isometric view and common features.17 Table 3 Performance levels, example 28 Table 3 Performance levels .29 Table 4 Creepage and clearance distances29 Table 5 Performance levels .43 Table 6 Creepage and cl

32、earance distances45 Table 7 Tests, example46 Table 8 Basic tests 47 Table 9 Number of test specimens and contacts 53 BS EN 61076-3-001:2008 4 61076-3-001 IEC:2008 Table 10 Test group P .53 Table 10 Test group P (continued) .55 Table 11 Test group AP .55 Table 11 Test group AP (continued).59 Table 12

33、 Test group BP .61 Table 12 Test group BP (continued).63 Table 13 Test group CP .65 Table 14 Test group DP .67 Table 15 Test group EP .69 Table 16 Test group FP .71 Table 17 Test group GP.73 Table 18 Test group HP .75 Table 19 Test group JP77 Table 20 Test group KP .77 BS EN 61076-3-001:200861076-3-

34、001 IEC:2008 7 INTRODUCTION This blank detail product specification is a supplementary document to the sectional product specification IEC 61076-3 and contains requirements for style, layout and content of detail product specifications for rectangular connectors. It is to be used in conjunction with

35、 the following publications: IEC 61076-1 and IEC 61076-3 for product requirements as well as IEC 62197-1 for quality requirements. The main content of this blank detail product specification is divided into two parts: on one page, the example for a blank detail product specification, on the other pa

36、ge, the guidance notes referring to the example. The guidance notes have the same numbering as the relevant paragraphs of the example pages. The sample pages can be used like a template when preparing a detail product specification within the scope of this document. This document is not intended to

37、replace the templates and guidance notes of IEC, but to assist in their application. All users are reminded to adhere to relevant directives and guidelines of the IEC when preparing a standard. NOTE 1 A detail quality specification IEC 62197-3-1xx should be prepared, based on the blank detail qualit

38、y specification for rectangular connectors future IEC 62197-3-001 and its references and should be used in conjunction with the detail product specification IEC 61076-3-1xx. NOTE 2 The quality assessment requirements for connectors according to the IEC 61076 series are detailed in IEC 62197-1. BS EN

39、 61076-3-001:2008 8 61076-3-001 IEC:2008 Guidance notes The following pages give a recommended layout of a detail product specification. The contents of this page give guidance on the information which should, wherever possible, be given on the front page of a detail product specification (see IEC G

40、uide 102). For the scope and definition of a detail product specification, see 1.2.3 of IEC 61076-1:2006. The numbers between brackets on the front page of the detail product specification correspond to the following information. Identification of the detail product specification 1 The International

41、 Electrotechnical Commission or the national standards organization under whose authority the detail product specification is drafted. It shall also be stated where the detail product specification may be obtained. 2 The IECQ/IEC number of the detail product specification and date of issue. 3 The IE

42、CQ/IEC number and issue number of the generic and the sectional specifications. 4 The national number of the detail product specification, if it differs from the IECQ/IEC number. Identification of the connector 5 A short description of the type of connector. 6 Information on the typical construction

43、 of the connector, for example, it should be stated whether the connector is suitable for mounting on printed boards. 7 Outline drawing, preferably of isometric or similar projection, from which the connector may be clearly identified. 8 Information on performance level(s) and assessment level(s) sp

44、ecified in the document, if applicable. 9 Reference data on the most important properties, to allow comparison between the various connector types. NOTE It may be convenient to give some of this information in tabular form. BS EN 61076-3-001:200861076-3-001 IEC:2008 9 1 IEC Detail product specificat

45、ion number 2 Generic specification number Electronic components of assessed quality in accordance with: 3 National number of detail product specification (it is not necessary to use this if the IEC number is identical) 4 Outline drawing 7 Product description 5 6 8Performance level(s): Assessment lev

46、el(s): Combination of performance levels and assessment levels: Reference data 9 1 General information 1.1 Scope BS EN 61076-3-001:2008 10 61076-3-001 IEC:2008 Guidance notes 1.2 Normative references It may be necessary to refer to other documents in addition to those stated, in which case the list

47、of related documents shall be extended beyond those referenced. If standards are referenced which are already listed in IEC 61076-1 and IEC 61076-3, their reference shall not be repeated in 1.2 of the detail product specification. BS EN 61076-3-001:200861076-3-001 IEC:2008 11 1.2 Normative reference

48、s The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61076-1:2006, Connectors for electronic equ

49、ipment Product requirements Part 1: Generic specification IEC 61076-3:2008, Connectors for electronic equipment Product requirements Part 3: Sectional specification for rectangular connectors IEC 62197-1:2006, Connectors for electronic equipment Quality assessment requirements Part 1: Generic specification IEC GUIDE 109, Environmental aspects Inclusion in electrotechnic