EN 60715-2017 en Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear controlgear and accessories.pdf

《EN 60715-2017 en Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear controlgear and accessories.pdf》由会员分享，可在线阅读，更多相关《EN 60715-2017 en Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear controlgear and accessories.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories (IEC 60715:2017)BS EN 60715:2017EUROPEAN STANDARD NORME EUROPENNE E

2、UROPISCHE NORM EN 60715 November 2017 ICS 29.130.20 Supersedes EN 60715:2001 English Version Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories (IEC 60715:2017) Dimensions de lappareillage basse tens

3、ion - Montage normalis sur profils-supports pour le support mcanique des appareillages et de leurs accessoires (IEC 60715:2017) Abmessungen von Niederspannungsschaltgerten - Genormte Tragschienen fr die mechanische Befestigung von elektrischen Gerten in Schaltanlagen (IEC 60715:2017) This European S

4、tandard was approved by CENELEC on 2017-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references conc

5、erning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC m

6、ember into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Repu

7、blic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Stand

8、ardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60715:

9、2017 E National forewordThis British Standard is the UK implementation of EN 60715:2017. It is identical to IEC 60715:2017. It supersedes BS EN 60715:2001, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PEL/121/1, Low voltage switchgear and controlgea

10、r.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Stan

11、dards Limited 2017ISBN 978 0 580 93039 3ICS 29.130.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2017.Amendments/corrigenda issued since publicat

12、ionDate Text affectedBRITISH STANDARDBS EN 60715:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60715 November 2017 ICS 29.130.20 Supersedes EN 60715:2001 English Version Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchg

13、ear, controlgear and accessories (IEC 60715:2017) Dimensions de lappareillage basse tension - Montage normalis sur profils-supports pour le support mcanique des appareillages et de leurs accessoires (IEC 60715:2017) Abmessungen von Niederspannungsschaltgerten - Genormte Tragschienen fr die mechanisc

14、he Befestigung von elektrischen Gerten in Schaltanlagen (IEC 60715:2017) This European Standard was approved by CENELEC on 2017-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nation

15、al standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A v

16、ersion in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgar

17、ia, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, S

18、witzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation

19、 in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60715:2017 E BS EN 60715:2017EN 60715:2017 2 European foreword The text of document 121A/153/FDIS, future edition 2 of IEC 60715, prepared by SC 121A “Low-voltage switchgear and controlgear“ of IEC/TC 121 “Switchgear a

20、nd controlgear and their assemblies for low voltage“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60715:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or b

21、y endorsement (dop) 2018-06-01 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-09-01 This document supersedes EN 60715:2001. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.

22、 CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60715:2017 was approved by CENELEC as a European Standard without any modification. BS EN 60715:2017EN 60715:2017 3 Annex ZA (normative) Normative refer

23、ences to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated referenc

24、es, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards lis

25、ted in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60947-7-2 - Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors EN 60947-7-2 2009 BS EN 60715:2017EN 60715:2017 4 Annex ZZ (infor

26、mative) Relationship between this European standard and the safety objectives of Directive 2014/35/EU 2014 OJ L96 aimed to be covered This European standard has been prepared under a Commissions standardisation request relating to harmonised standards in the field of the Low Voltage Directive, M/511

27、, to provide one voluntary means of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use

28、within certain voltage limits 2014 OJ L96. Once this standard is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of the scope of this standard, a presumption of conformity

29、with the corresponding safety objectives of that Directive, and associated EFTA regulations. Table ZZ.1 Correspondence between this European standard and Annex I of Directive 2014/35/EU 2014 OJ L96 Safety objectives of Directive 2014/35/EU Clause(s) / sub-clause(s) of this EN Remarks/note 1 a) 2, 3,

30、 5, Annex A 1 b) 5, Annex B 1 c) Refer to 2 a) to 2 d) and 3 a) to 3 c) of this table 2 a) - Not applicable 2 b) - Not applicable 2 c) 4, 5, Annex A, Annex B 2 d) - Not applicable 3 a) 4, 5, Annex A, Annex B 3 b) Annex B 3 c) Annex B WARNING 1: Presumption of conformity stays valid only as long as a

31、 reference to this European standard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the latest list published in the Official Journal of the European Union. WARNING 2: Other Union legislation may be applicable to th

32、e product(s) falling within the scope of this standard. BS EN 60715:2017 2 IEC 60715:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 8 4 Functional requirements 8 5 Standard dimensions . 8 5.1 General . 8 5.2 Top hat section . 9 5.3 “C“

33、 section 10 5.4 “G“ section 13 Annex A (normative) Specific steel mounting rails . 14 A.1 General . 14 A.2 Top hat section rail TH 15-5,5 14 A.2.1 Dimensions 14 A.2.2 Tolerances 15 A.3 Top hat section rail TH 35-7,5 and TH 35-15 . 15 A.3.1 Dimensions 15 A.3.2 Tolerances 16 A.4 Top hat section rail T

34、H 75-25 . 16 A.4.1 Dimensions 16 A.4.2 Tolerances 17 A.5 “C“ section rails: C 20, C 30, C 40 and C 50 . 17 A.5.1 Dimensions 17 A.5.2 Tolerance 18 A.6 “G“ section rail: G 32 18 A.6.1 Dimensions 18 A.6.2 Tolerances 19 Annex B (informative) Application guide . 20 B.1 General . 20 B.2 Guidance for use o

35、f top hat rails . 20 B.2.1 For steel rails in Annex A . 20 B.2.2 For rails other than steel rails 23 B.3 Guidance for use of “C“ section rails . 23 B.3.1 General . 23 B.3.2 For steel rails to Annex A 23 B.3.3 For rails other than steel rails 27 Bibliography 28 Figure 1 Mounting rail TH 15 9 Figure 2

36、 Mounting rail TH 35 9 Figure 3 Mounting rail TH 75 10 Figure 4 Mounting rail C 20 10 Figure 5 Mounting rail C 30 11 Figure 6 Mounting rail C 40 11 BS EN 60715:2017IEC 60715:2017 IEC 2017 3 Figure 7 Mounting rail C 50 12 Figure 8 Mounting rail G 32 13 Figure A.1 Top hat rails 15 mm wide for snap-on

37、mounting of equipment 15 Figure A.2 Tolerances (TH 15-5,5) . 15 Figure A.3 Top hat rails 35 mm wide for snap-on mounting of equipment 16 Figure A.4 Tolerances (TH 35-7,5 and TH 35-15) . 16 Figure A.5 Top hat rail 75 mm wide for snap-on mounting of equipment 17 Figure A.6 Tolerances (TH 75-25) 17 Fig

38、ure A.7 “C“ section rails 18 Figure A.8 Tolerances (C 20, C 30, C 40 and C 50) . 18 Figure A.9 Dimensions of “G“ section rails . 19 Figure A.10 Tolerances (G 32) . 19 Figure B.1 Assessment of rail deflection 21 Figure B.2 Permissible load capacity ME= f(L,h) . 22 Figure B.3 Permissible load capacity

39、 ME= f(L,h) . 23 Figure B.4 Assessment of rail deflection 24 Figure B.5 Permissible load capacity ME= f(L) 25 Figure B.6 Assembly of two identical “C“ section rails Assessment of the deflection 26 Figure B.7 Assembly of two identical “C“ section rails Permissible stress ME= f(L) for H = 100 mm . 27

40、Table A.1 Dimensions of “C” section rails . 18 Table B.1 Maximum torque Mmax24 BS EN 60715:2017 4 IEC 60715:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DIMENSIONS OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDIZED MOUNTING ON RAILS FOR MECHANICAL SUPPORT OF SWITCHGEAR, CONTROLGEAR

41、AND ACCESSORIES FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standa

42、rdization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparatio

43、n is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with t

44、he International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subject

45、s since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical co

46、ntent of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent poss

47、ible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conform

48、ity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directo

49、rs, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited