EN 60400-2017 en Lampholders for tubular fluorescent lamps and starterholders.pdf

《EN 60400-2017 en Lampholders for tubular fluorescent lamps and starterholders.pdf》由会员分享，可在线阅读，更多相关《EN 60400-2017 en Lampholders for tubular fluorescent lamps and starterholders.pdf（100页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Lampholders for tubular fluorescent lamps and starterholders (IEC 60400:2017)BS EN 60400:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60400 September 2017 ICS 29.140.10 Supersedes EN 60400:2008 English Versi

2、on Lampholders for tubular fluorescent lamps and starterholders (IEC 60400:2017) Douilles pour lampes tubulaires fluorescence et douilles pour starters (IEC 60400:2017) Lampenfassungen fr rhrenfrmige Leuchtstofflampen und Starterfassungen (IEC 60400:2017) This European Standard was approved by CENEL

3、EC on 2017-07-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standard

4、s may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language a

5、nd notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Ge

6、rmany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de N

7、ormalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60400:2017 E National forewordThis

8、British Standard is the UK implementation of EN 60400:2017. It is identical to IEC 60400:2017. It supersedes BS EN 60400:2008+A2:2014, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee CPL/34/2, Lamp caps and holders.A list of organizations represented o

9、n this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 89546

10、3ICS 29.140.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS

11、 EN 60400:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60400 September 2017 ICS 29.140.10 Supersedes EN 60400:2008 English Version Lampholders for tubular fluorescent lamps and starterholders (IEC 60400:2017) Douilles pour lampes tubulaires fluorescence et douilles pour starters (IEC 604

12、00:2017) Lampenfassungen fr rhrenfrmige Leuchtstofflampen und Starterfassungen (IEC 60400:2017) This European Standard was approved by CENELEC on 2017-07-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

13、 the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (Englis

14、h, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of A

15、ustria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slo

16、venia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All

17、 rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60400:2017 E BS EN 60400:2017EN 60400:2017 2 European foreword The text of document 34B/1900/FDIS, future edition 8 of IEC 60400, prepared by SC 34B “Lamp caps and holders” of IEC/TC 34 “Lamps an

18、d related equipment” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60400:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-04-20 l

19、atest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-07-20 This document supersedes EN 60400:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held respo

20、nsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative

21、 Annex ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC 60400:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards i

22、ndicated: IEC 60061-1 NOTE Harmonized as EN 60061-1. IEC 60061-4 NOTE Harmonized as EN 60061-4. IEC 60068-2-20:2008 NOTE Harmonized as EN 60068-2-20:2008. IEC 60238 NOTE Harmonized as EN 60238. IEC 60664-1:2007 NOTE Harmonized as EN 60664-1:2007. IEC 60664-4:2005 NOTE Harmonized as EN 60664-4:2005.

23、IEC 61199 NOTE Harmonized as EN 61199. IEC 60838-1:2016 NOTE Harmonized as EN 60838-1:2017. IEC 60838-1:2016/AMD1:2017 NOTE Harmonized as EN 60838-1:2017/A1:2017. BS EN 60400:2017EN 60400:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European

24、 publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) ap

25、plies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/

26、HD Year IEC 60061-2 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - - IEC 60061-3 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges EN 60061-3 - IEC 60068-2-75 2014 Envi

27、ronmental testing - Part 2-75: Tests - Test Eh: Hammer tests EN 60068-2-75 2014 IEC 60081 - Double-capped fluorescent lamps - Performance specifications EN 60081 - IEC 60112 2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials EN 60112 200

28、3 + A1 2009 + A1 2009 IEC 60155 - Glow-starters for fluorescent lamps EN 60155 - IEC 60352-1 1997 Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance EN 60352-1 1997 IEC 60399 - Barrel thread for lampholders with shade holder ring EN 60399

29、 - IEC 60529 1989 Degrees of protection provided by enclosures (IP Code) EN 60529 1991 - - + corrigendum May 1993 + A1 1999 + A1 2000 + A2 2013 + A2 2013 IEC 60598-1 - Luminaires - Part 1: General requirements and tests EN 60598-1 - IEC 60695-2-11 2000 Fire hazard testing - Part 2-11: Glowing/hot-wi

30、re based test methods - Glow-wire flammability test method for end-products - - IEC 60695-11-5 2016 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 2017 ISO 4046-4 2016 Paper, board, pulps and related terms

31、 - Vocabulary - Part 4: Paper and board grades and converted products - - BS EN 60400:2017EN 60400:2017 4 Annex ZZ (informative) Relationship between this European standard and the safety objectives of Directive 2014/35/EU 2014 OJ L96 aimed to be covered This European standard has been prepared unde

32、r a Commissions standardisation request relating to harmonised standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation

33、of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits 2014 OJ L96. Once this standard is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of

34、 this standard given in Table ZZ.1 confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding safety objectives of that Directive, and associated EFTA regulations. Table ZZ.1 Correspondence between this European standard and Annex I of Directive 2014

35、/35/EU 2014 OJ L96 Safety objectives of Directive 2014/35/EU Clause(s) / sub-clause(s) of this EN Remarks / Notes 1. General conditions a) the essential characteristics, the recognition and observance of which will ensure that electrical equipment will be used safely and in applications for which it

36、 was made, shall be marked on the electrical equipment, or, if this is not possible, on an accompanying document; Clause 8 b) the electrical equipment, together with its component parts, shall be made in such a way as to ensure that it can be safely and properly assembled and connected; All clauses

37、c) the electrical equipment shall be so designed and manufactured as to ensure that protection against the hazards set out in points 2 and 3 is assured, providing that the equipment is used in applications for which it was made and is adequately maintained. See item 2 and 3 of this table 2. Protecti

38、on against hazards arising from the electrical BS EN 60400:2017EN 60400:2017 5 equipment Measures of a technical nature shall be laid down in accordance with point 1, in order to ensure that: a) persons and domestic animals are adequately protected against the danger of physical injury or other harm

39、 which might be caused by direct or indirect contact; Clauses 4, 9, 10, 11, 12 and 16 b) temperatures, arcs or radiation which would cause a danger, are not produced; Clauses 11, 12, 14, 17 and 18 c) persons, domestic animals and property are adequately protected against non-electrical dangers cause

40、d by the electrical equipment which are revealed by experience; Clauses 4, 11, 14, 15 and 19 d) the insulation is suitable for foreseeable conditions. Clauses 9, 11, 15, 17 and 18 3. Protection against hazards which may be caused by external influences on the electrical equipment Technical measures

41、shall be laid down in accordance with point 1, in order to ensure that the electrical equipment: a) meets the expected mechanical requirements in such a way that persons, domestic animals and property are not endangered; Clauses 8, 11, 15 and 19 b) is resistant to non-mechanical influences in expect

42、ed environmental conditions, in such a way that persons, domestic animals and property are not endangered; Clauses 11, 13, 17 and 18 c) does not endanger persons, domestic animals and property in foreseeable conditions of overload. Clauses 11, 13 and 18 WARNING 1: Presumption of conformity stays val

43、id only as long as a reference to this European standard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the latest list published in the Official Journal of the European Union. BS EN 60400:2017EN 60400:2017 6 WARNIN

44、G 2: Other Union legislation may be applicable to the product(s) falling within the scope of this standard. BS EN 60400:2017 2 IEC 60400:2017 IEC 2017 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references 7 3 Terms and definitions 8 4 General requirement 12 5 General conditions for tests . 13 6 Ele

45、ctrical rating . 14 7 Classification . 14 8 Marking . 15 9 Protection against electric shock . 17 10 Terminals 19 11 Construction 21 12 Resistance to dust and moisture 26 13 Insulation resistance and electric strength . 27 14 Endurance . 28 15 Mechanical strength 29 16 Screws, current-carrying parts

46、 and connections . 31 17 Creepage distances and clearances 33 18 Resistance to heat, fire and tracking 35 19 Resistance to excessive residual stresses (season cracking) and to rusting 40 Annex A (normative) Examples of lampholders covered by IEC 60400 . 86 Annex B (normative) Season cracking/corrosi

47、on test . 87 B.1 General . 87 B.2 Test cabinet 87 B.3 Test solution . 87 B.4 Test procedure 88 Annex C (informative) Protection against electric shock Explanatory details for the installation of lampholders according to 9.2 89 Annex D (informative) Clauses containing new or more stringent requiremen

48、ts with respect to the previous edition 90 Bibliography 91 Figure 1 Mounting jig for the testing of lampholders . 41 Figure 2 Mounting sheet 42 Figure 3 Fixture for the testing of lampholder flexibility 43 Figure 4 Test caps G5, GX5 and G13 44 Figure 5 Impact test apparatus and mounting support 46 F

49、igure 6 Test cap for the test of Clause 14 for lampholders 2GX13 47 Figure 7 Ball-pressure apparatus . 48 Figure 8 Bracket for fixing lampholders for the impact test . 48 Figure 9 Test cap and test assembly for testing of resistance to heat of lampholders G13, G5 and GX5 with T marking 50 Figure 10 Dimensions of starterholder and holder 52 BS EN 60400:2017IEC 60400:2017 IEC 2017 3 Figure 11 “Go” plug gauges for starterholders 53 Figure 12 Plug gauge for starterholders for testing contac