EN 60255-11-2010 en Measuring relays and protection equipment - Part 11 Voltage dips short interruptions variations and ripple on auxiliary power supply port《测量继电器和保护设备 第11部分 自备供电设.pdf

《EN 60255-11-2010 en Measuring relays and protection equipment - Part 11 Voltage dips short interruptions variations and ripple on auxiliary power supply port《测量继电器和保护设备 第11部分 自备供电设.pdf》由会员分享，可在线阅读，更多相关《EN 60255-11-2010 en Measuring relays and protection equipment - Part 11 Voltage dips short interruptions variations and ripple on auxiliary power supply port《测量继电器和保护设备 第11部分 自备供电设.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationMeasuring relays and protection equipment Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply portBS EN 60255-11:2010National forewordThis

2、 British Standard is the UK implementation of EN 60255-11:2010. It isidentical to IEC 60255-11:2008.The UK participation in its preparation was entrusted to Technical CommitteePEL/95, Measuring relays and protection systems.A list of organizations represented on this committee can be obtained onrequ

3、est to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 59016 0ICS 29.120.70Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Stan

4、dard was published under the authority of the StandardsPolicy and Strategy Committee on 28 February 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60255-11:2010EUROPEAN STANDARD EN 60255-11 NORME EUROPENNE EUROPISCHE NORM January 2010 CENELEC European Committ

5、ee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC memb

6、ers. Ref. No. EN 60255-11:2010 E ICS 29.120.70 English version Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port (IEC 60255-11:2008) Relais de mesure et dispositifs de protection - Partie 11: Creux de tension,

7、 coupures brves, variations et ondulation sur laccs alimentation auxiliaire (CEI 60255-11:2008) Messrelais und Schutzeinrichtungen - Teil 11: Spannungseinbrche, Kurzzeitunterbrechungen, Spannungsschwankungen und Wechselanteil im Anschluss fr die Hilfsstromversorgung (IEC 60255-11:2008) This European

8、 Standard was approved by CENELEC on 2009-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references co

9、ncerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member in

10、to its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icel

11、and, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60255-11:2010EN 60255-11:2010 - 2 - Foreword The text of document 95/239/FDIS, future edition 2 of IEC 60255-11,

12、 prepared by IEC TC 95, Measuring relays and protection equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60255-11 on 2009-12-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identic

13、al national standard or by endorsement (dop) 2010-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-12-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60255-11:2008 was approved by CENELEC

14、as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 61000-6-2 NOTE Harmonized as EN 61000-6-2. _ BS EN 60255-11:2010- 3 - EN 60255-11:2010 Annex ZA (normative) Normative references to internati

15、onal publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amend

16、ments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60255-6 - Electrical relays - Part 6: Measuring relays and protection equipment EN 60255-6 - IEC 61000-4-11 - Electr

17、omagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests EN 61000-4-11 - IEC 61000-4-17 - Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power po

18、rt immunity test EN 61000-4-17 - IEC 61000-4-29 - Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests EN 61000-4-29 - BS EN 60255-11:2010 2 60255-11 IEC:2008 CONTENTS 1

19、Scope and object5 2 Normative references .5 3 Terms and definitions .6 4 Requirements .6 4.1 Test levels.6 4.2 Test requirements .6 5 Test equipment.8 6 Test set-up .8 6.1 General .8 6.2 Voltage dips 8 6.3 Voltage interruptions .8 6.4 Alternating component in d.c. (ripple) 8 6.5 Gradual shut-down/st

20、art-up test 8 6.6 Polarity inversion.9 7 Test procedure .9 8 Criteria for acceptance .9 9 Test report10 Bibliography11 Figure 1 Gradual shut down/start up test8 Table 1 Type, levels and duration of tests7 Table 2 Criteria for acceptance 9 BS EN 60255-11:201060255-11 IEC:2008 5 MEASURING RELAYS AND P

21、ROTECTION EQUIPMENT Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port 1 Scope and object This part of the IEC 60255 series specifies the general requirements for a.c. and d.c. power supplies, for measuring relays and protection equipment for power syste

22、m protection, including the control, monitoring and process interface equipment used with those systems. This part is based on: IEC 61000-4-11 for a.c. voltage dips, short interruptions and variations; IEC 61000-4-17 for voltage ripple; IEC 61000-4-29 for d.c. voltage dips, short interruptions and v

23、ariations. The objective of the tests is to confirm that the equipment under test will operate correctly when energised and subjected to dips, interruptions and alternating components (ripple). The requirements specified in this standard are applicable to measuring relays and protection equipment in

24、 a new condition and all tests specified are type tests only. The object of this standard is to state: definitions of terms used; test severity levels; test equipment; test set-up; test procedure; criteria for acceptance; test report. 2 Normative references The following referenced documents are ind

25、ispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60255-6, Electrical relays Part 6: Measuring relays and protection equipment IEC 61000-

26、4-11, Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests IEC 61000-4-17, Electromagnetic compatibility (EMC) Part 4-17: Testing and measurement techniques Ripple on d.c. input power port immunity t

27、est IEC 61000-4-29, Electromagnetic compatibility (EMC) Part 4-29: Testing and measurement techniques Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests BS EN 60255-11:2010 6 60255-11 IEC:2008 3 Terms and definitions For the purposes of this document, th

28、e following terms and definitions apply. 3.1 type test conformity test made on one or more items representative of the production IEV 151-16-16 3.2 equipment under test EUT equipment which may be either a measuring relay or a protection equipment 3.3 auxiliary power supply port AC or d.c. auxiliary

29、energising input of the EUT NOTE Ports connected to voltage transformer (VT) or current transformer (CT) are not covered by this standard. 3.4 alternating component Acalternating component in d.c. is defined as: 0minmaxc100 UUU =A , in % where Umax= maximum instantaneous voltage; Umin= minimum insta

30、ntaneous voltage; U0= d.c. component. IEV 161-02-26, modified 4 Requirements 4.1 Test levels It is important that the effects of the tests should be assessed at the maximum and minimum values of the voltage according to the product technical documentation. The voltages in this standard use the rated

31、 voltage for the equipment (UT) as a basis for voltage test level specification. Where the equipment has a rated voltage range, the test procedure shall be applied for both the lowest and highest voltages declared in the voltage range. EXAMPLE A product with a rated voltage range of 100 V to 200 V 2

32、0 % should be tested at 80 V and 240 V. 4.2 Test requirements Products shall be tested as described in Table 1. For products intended to be powered by d.c. power supply, only the corresponding tests shall be done. For products intended to be powered by a.c. power supply, only the corresponding tests

33、 shall be done. For products intended to be powered either by a.c. power supply or by d.c. power supply, both tests shall be done. BS EN 60255-11:201060255-11 IEC:2008 7 Table1Type,levelsand duration of testsRowTypeof phenomena Test specificationsUnits Basic standards Criterion for acceptance 0 10 t

34、o 1000 b%residualvoltage msA 40 200 %residualvoltage msC 1a Voltage dips(for d.c.power supply) 70 500 %residualvoltage msIEC 61000-4-29 C 0 0,5 to 25 a%residualvoltage cycles A 40 10/12 at50/60 Hz%residualvoltage cycles C 1b Voltage dips(for a.c.power supply) 70 25/30 at50/60 Hz%residualvoltage cycl

35、es IEC 61000-4-11 C 2a Voltage interruptions(for d.c.power supply) 0 5 %residualvoltage s IEC 61000-4-29C 2b Voltage interruptions(for a.c.power supply) 0 250/300 at50/60 Hz%residualvoltage cycles IEC 61000-4-11C 3 Alternating componentin d.c.(ripple)(for d.c.power supply) 15 %ofrated d.c.value 100/

36、120 at50/60 HzcV Hz,sinusoidalwaveformIEC 61000-4-17A 4 Gradualshut-down/start-up (for d.c.power supply) 60 5 60 s,shut-down ramp min,power offs,start-up ramp -C 5 Reversalofd.c.power supplypolarity 1 min -C aManufacturershalldeclare the duration among the followingvalues:0,5 cycle,1 cycle,2,5 cycle

37、s,5 cycles,10 cycles,25 cycles. bManufacturershalldeclare the duration among the followingvalues:10 ms,20 ms,30 ms,50 ms,100 ms,200 ms,300 ms,500 msor 1 000 ms.cTestshallbe done ata frequency oftwice the specified power systemfrequency(ies).BS EN 60255-11:2010 8 60255-11 IEC:2008 5 Test equipment Fo

38、r a.c. tests, test equipment shall comply with IEC 61000-4-11. For alternating component in d.c., test equipment shall comply with IEC 61000-4-17. For other d.c. tests, test equipment shall comply with IEC 61000-4-29. 6 Test set-up 6.1 General IEC 60255-6 standard applies. The protection relay shall

39、 be in a quiescent state. Half of the binary inputs and half of the output relays shall be energised. Communication modules, if any, shall be activated. 6.2 Voltage dips See IEC 61000-4-11 for a.c. dips. See IEC 61000-4-29 for d.c. dips. 6.3 Voltage interruptions See IEC 61000-4-11 for a.c. interrup

40、tions. See IEC 61000-4-29 for d.c. interruptions. 6.4 Alternating component in d.c. (ripple) See IEC 61000-4-17. 6.5 Gradual shut-down/start-up test Figure 1 below shows how to test products. Figure 1 Gradual shut down/start up test IEC 1731/08 BS EN 60255-11:201060255-11 IEC:2008 9 6.6 Polarity inv

41、ersion Reverse polarity for power supply inputs shall be applied for 1 min. The results shall be stated and documented by the manufacturer. 7 Test procedure The tests shall be carried out at the reference conditions given in IEC 61000-4-11, IEC 61000-4-17, IEC 61000-4-29 and IEC 60255-6. 8 Criteria

42、for acceptance The criteria for acceptance are given in Table 2. Table 2 Criteria for acceptance Criterion Function Criterion for acceptance Protection Normal performance within the specification limits, during and after the test. Command and control Normal performance within the specification limit

43、s, during and after the test. Measurement Temporary degradation during test, with self-recovery at the end of the test. No loss of stored data. Integral human-machine interface and visual alarms Temporary degradation or loss of function during test, with self-recovery at the end of the test. No loss

44、 of stored data. A Data communication Possible bit error rate increase but no loss of transmitted data. Protection Normal performance within the specification limits, or a predefined behaviour, e.g. temporary loss of function or switch-off, which is clearly specified by the manufacturer until normal

45、 operation is automatically resumed. There shall be no unwanted operation. Command and control Normal performance within the specification limits, or a predefined behaviour, e.g. temporary loss of function or switch-off, which is clearly specified by the manufacturer until normal operation is automa

46、tically resumed. There shall be no unwanted operation. Measurement Temporary degradation during test, or a predefined behaviour, e.g. temporary loss of function, which is clearly specified by the manufacturer until normal operation is automatically resumed. Integral human-machine interface and visua

47、l alarms Temporary degradation during test, or a predefined behaviour, e.g. temporary loss of function or switch-off, which is clearly specified by the manufacturer until normal operation is automatically resumed. C Data communication Possible bit error rate increase, or a predefined behaviour, e.g.

48、 loss of data, which is clearly specified by the manufacturer until normal operation is automatically resumed. BS EN 60255-11:2010 10 60255-11 IEC:2008 9 Test report The test report shall include: the identification and configuration of the EUT; the test conditions; the documentation of the test set

49、-up; the operating conditions of the EUT, for example, relay settings and values of input energising quantities; the test severity values; the test conclusion (pass/fail). BS EN 60255-11:201060255-11 IEC:2008 11 Bibliography IEC 60050-151, International Electrotechnical Vocabulary Part 151: Electrical and magnetic devices IEC 60050-161, International Electrotechnical Vocabulary Chapter 161: Electromagne