EN 60077-2-2002 en Railway Applications - Electric Equipment for Rolling Stock Part 2 Electrotechnical Components - General Rules《铁路设施 机车车辆用电气设备 第2部分 电工元件 总则 IEC 60077-2-1999 修改件》.pdf

《EN 60077-2-2002 en Railway Applications - Electric Equipment for Rolling Stock Part 2 Electrotechnical Components - General Rules《铁路设施 机车车辆用电气设备 第2部分 电工元件 总则 IEC 60077-2-1999 修改件》.pdf》由会员分享，可在线阅读，更多相关《EN 60077-2-2002 en Railway Applications - Electric Equipment for Rolling Stock Part 2 Electrotechnical Components - General Rules《铁路设施 机车车辆用电气设备 第2部分 电工元件 总则 IEC 60077-2-1999 修改件》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60077-2:2002 Railway applications Electric equipment for rolling stock Part 2: Electrotechnical components General rules The European Standard EN 60077-2:2002 has the status of a British Standard ICS 45.060 BS EN 60077-2:2002 This British Standard was published under the autho

2、rity of the Standards Policy and Strategy Committee on 17 January 2003 BSI 17 January 2003 ISBN 0 580 41118 4 National foreword This British Standard is the official English language version of EN 60077-2:2002. It was derived by CENELEC from IEC 60077-2:1999. The CENELEC common modifications have be

3、en implemented at the appropriate places in the text and are indicated by sidelining. The UK participation in its preparation was entrusted by Technical Committee GEL/9, Railway electrotechnical applications, to Subcommittee GEL/9/2, Rolling stock, which has the responsibility to: A list of organiza

4、tions represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Corresp

5、ondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of

6、 itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments

7、and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 33 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No.

8、 Date CommentsEUROPEAN STANDARD EN 60077-2 NORME EUROPENNE EUROPISCHE NORM May 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Bruss

9、els 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60077-2:2002 E ICS 45.060 English version Railway applications - Electric equipment for rolling stock Part 2: Electrotechnical components - General rules (IEC 60077-2:1999,

10、modified) Applications ferroviaires - Equipements lectriques du matriel roulant Partie 2: Composants lectrotechniques - Rgles gnrales (CEI 60077-2:1999, modifie) Bahnanwendungen - Elektrische Betriebsmittel auf Bahnfahrzeugen Teil 2: Elektrotechnische Bauteile - Allgemeine Regeln (IEC 60077-2:1999,

11、modifiziert) This European Standard was approved by CENELEC on 2002-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bib

12、liographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibil

13、ity of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Lu

14、xembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EN 00677-22:002 - 2 - Foreword The text of the International Standard IEC 60077-2:1999, prepared by IEC TC 9, Electric railway equipment, together with the common modifications prepared by SC 9XB, Electrome

15、chanical material on board of rolling stock, of Technical Committee CENELEC TC 9X, Electrical and electronic applications for railways, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 60077-2 on 2002-03-01. The following dates were fixed: - latest date by which the

16、 EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-03-01 - latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-03-01 This Part 2 shall be read in conjunction with EN 60077-1. In thi

17、s European Standard the common modifications to the International Standard are indicated by a vertical line in the left margin of the text. Subclauses, tables and figures which are additional to those in IEC 60077-2 are prefixed “Z“. Annexes designated “normative“ are part of the body of the standar

18、d. Annexes designated “informative“ are given for information only. In this standard, annexes A and ZA are normative and annex B is informative. Annex ZA has been added by CENELEC. _ Page2 EN600772:2002- 3 - EN 00677-22:002 Contents Introduction 6 1 Scope 6 2 Normative references.7 3 Definitions7 3.

19、1 Components .7 3.2 Component parts 8 3.3 Operational features .10 4 Classification .13 5 Characteristics.13 5.1 List of characteristics 13 5.2 Type of component.13 5.3 Rated and limiting values for the main circuit13 5.3.1 General.13 5.3.2 Rated voltages14 5.3.3 Rated currents 14 5.3.4 Rated time c

20、onstants (for d.c. switchgear) 14 5.3.5 Rated power factor (for a.c. switchgear)14 5.4 Operational frequency classes15 5.5 Component categories15 5.6 Electric control circuits15 5.7 Pneumatic control circuits.16 5.8 Manual control16 5.9 Electric auxiliary circuits16 5.10 Pneumatic auxiliary circuits

21、.16 5.11 Peak arc voltages .16 6 Product information17 6.1 Nature of information 17 6.1.1 Component documentation .17 6.1.2 Other information 18 6.2 Marking 18 6.3 Instructions for storage, installation, operation and maintenance18 7 Normal service conditions18 8 Constructional and performance requi

22、rements 18 8.1 Constructional requirements.18 8.1.1 Terminals and connecting capacity .18 8.1.2 Bonding terminal .19 Page3 EN600772:2002EN 00677-22:002 - 4 - 8.2 Performance requirements .19 8.2.1 Operating conditions .19 8.2.2 Temperature rise.20 8.2.3 Operation following inactivity.20 8.2.4 Electr

23、omagnetic compatibility (EMC).20 8.2.5 Acoustic noise emission20 8.2.6 Dielectric properties 20 8.2.7 Switching overvoltages .21 8.2.8 Operational performance capability.21 8.2.9 Ability to withstand vibration and shock.23 8.2.10 Ability to withstand short-time current23 9 Tests23 9.1 Kinds of tests

24、23 9.2 Verification of constructional requirements .24 9.3 Type tests.24 9.3.1 Test sequences.24 9.3.2 General test conditions .24 9.3.3 Test sequence I: general performance characteristics 25 9.3.4 Test sequence II: ability to withstand vibration and shock .26 9.3.5 Test sequence III: critical curr

25、ents.27 9.3.6 Test sequence IV: climatic conditions .27 9.3.7 Test sequence V: other tests.28 9.4 Routine tests.28 9.4.1 General.28 9.4.2 Mechanical operation28 9.4.3 Measurement of resistance or impedance.28 9.4.4 Air-tightness (for pneumatic components) .28 9.4.5 Dielectric withstand .28 9.4.6 Che

26、ck on the setting and operation of protective equipment and relays (calibration) .28 Annex A (normative) Correspondence between auxiliary contacts and steady states of switchgear29 Annex B (informative) Bibliography.31 Annex ZA (normative) Normative references to international publications with thei

27、r corresponding European publications 32 Page4 EN600772:2002- 5 - EN 00677-22:002 Figures Figure A.1 Relationship between auxiliary contacts and steady states of switchgear .30 Tables Table 1 Rated time constants.14 Table 2 Temperature rise limits and temperature limits 20 Table 3 Operational perfor

28、mance capability for category A1 component 22 Table 4 Operational performance capability for category A2 component 22 Table 5 Operational performance capability for category A3 component 23 Table 6 Operational performance capability for category A4 component 23 Table 7 List of test sequences24 Table

29、 8 Tolerances on test values25 Page5 EN600772:2002EN 00677-22:002 - 6 - Introduction This product standard is Part 2 of the EN 60077 series of product standards: Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules, - Part 2: Electrotechn

30、ical components - General rules, - Part 3: Electrotechnical components - Rules for d.c. circuit-breakers, - Part 4: Electrotechnical components - Rules for a.c. circuit-breakers, - Part 5: Electrotechnical components - Rules for HV fuses. This document has used IEC 60077-2 as its base and its form a

31、nd structure have been modified to take account of already existing European Standards covering related subjects. 1 Scope In addition to the rules given in EN 60077-1, this European standard provides general rules for all electrotechnical components installed in power circuits, auxiliary circuits an

32、d control circuits, etc., on rolling stock. NOTE Certain of these rules may, after agreement between user and manufacturer, be used for electrotechnical components installed on vehicles other than rail rolling stock such as mine locomotives, trolleybuses, etc. The purpose of this standard is to adap

33、t the general rules given in EN 60077-1 to all electrotechnical components for rolling stock, in order to obtain uniformity of requirements and tests for the corresponding range of components. Electrotechnical components are mainly switchgear and controlgear, irrespective of their control, including

34、 also relays, valves, resistors, fuses, etc. NOTE The incorporation of electronic components or electronic sub-assemblies into electrotechnical components is now common practice. Although this standard is not applicable to electronic equipment, the presence of electronic components does not provide

35、a reason to exclude such electrotechnical components from the scope. Electronic sub-assemblies should comply with the relevant standard. This standard states a) the characteristics of the components, b) the constructional and performance requirements with which components have to comply, c) the test

36、s intended to confirm compliance of the components with these characteristics under these service conditions, and the methods to be adopted for these tests, d) the information to be marked on, or given with the apparatus. This standard does not cover industrial electrotechnical components which comp

37、ly with their own product standard. In order to ensure satisfactory operation of these components for rolling stock, this standard should be used to specify only the particular requirements for railway application. In that case, a specific document should state the additional requirements with which

38、 the industrial components are to comply, e.g. - to be adapted (for example for control voltage, environmental conditions, etc.), or - to be installed and used such that they do not have to endure specific railway conditions, or - to be additionally tested to prove that these components can withstan

39、d satisfactorily the railway conditions. Page6 EN600772:2002- 7 - EN 00677-22:002 2 Normative references NOTE Normative references to international publications are listed in annex ZA (normative). 3 Definitions For the purposes of this part of EN 60077, the definitions given in clause 3 of EN 60077-

40、1, together with the following additional definitions, apply. NOTE The definitions are also given to be used as reference terminology for the other parts of this series of standards, as well as for other particular documents. 3.1 Components 3.1.1 active electrical component simple device or assembly

41、 of devices which, in response to a control signal, executes a function or various inseparable functions by changing their state, for which the control or the function is electrical (e.g. contactor, relay, etc.) 3.1.2 passive electrical component simple device or assembly of devices which are not in

42、cluded in the active electrical components group and have at least one electrical function (e.g. mounting insulator, permanent connection, resistor, capacitor, etc.) 3.1.3 switchgear and controlgear a general term covering switching devices and their combination with associated control, measuring, p

43、rotective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures IEV 441-11-01 3.1.4 switchgear a general term covering switching devices and their combination with associated control, measuring, pro

44、tective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures, intended in principle for use in connection with generation, transmission, distribution and conversion of electric energy IEV 441-11-02

45、 3.1.5 controlgear a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures, intended in p

46、rinciple for the control of electric energy consuming equipment IEV 441-11-03 3.1.6 switching device a device designed to make or break the current in one or more electric circuits IEV 441-14-01 NOTE A switching device may perform one or both of these operations. Page7 EN600772:2002EN 00677-22:002 -

47、 8 - 3.1.7 fuse a device that, by the fusing of one or more of its specifically designed and proportioned components, opens the circuit in which it is inserted by breaking the current when this exceeds a given value for a sufficient time. The fuse comprises all the parts that form the complete devic

48、e IEV 441-18-01 3.1.8 switch (mechanical) a mechanical switching device capable of making, carrying and breaking currents under normal circuit conditions which may include specified operating overload conditions and also carrying for a specified time currents under specified abnormal circuit conditi

49、ons such as those of short-circuit IEV 441-14-10 NOTE A switch may be capable of making but not breaking short-circuit currents. 3.1.9 circuit breaker a mechanical switching device, capable of making, carrying and breaking currents under normal circuit conditions and also making, carrying for a specified time and breaking currents under specified abnormal circuit conditions such as those of short-circuit IEV 441-14-20 3.1.10 contactor (mechanical) a mechan