EN 15664-1-2008 en Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1 Design and operation (Incorpo.pdf

《EN 15664-1-2008 en Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1 Design and operation (Incorpo.pdf》由会员分享，可在线阅读，更多相关《EN 15664-1-2008 en Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1 Design and operation (Incorpo.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 15664-1:2008Influence of metallic materials on water intended for human consumption Dynamic rig test for assessment of metal release Part 1: Design and operationICS 13.060.20; 67.250nullnull nullnullnullnullnullnullnull nullnullnullnullnullnullnull nullnullnull nullnullnullnul

2、lnullnullnullnullnullnull nullnullnullnullnullnull nullnull nullnullnullnullnullnullnullnullnull nullnull nullnullnullnullnullnullnullnullnull nullnullnull+A1:2013National forewordThis British Standard is the UK implementation of EN 15664-1:2008+A1:2013. It supersedes BS EN 15664-1:2008, which is wi

3、thdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted

4、to Technical Committee EH/6, Effects of materials on water quality.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applicat

5、ion.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 15664-1:2008+A1:2013This British Standard waspublished under the authorityof the Standards Policy andStrategy Committeeon 29 February 2008 The British Standards Institution 2014. Published by BSI Standards Lim

6、ited2014Amendments/corrigenda issued since publicationDate Comments 31 January 2014 Implementation of CEN amendment A1:2013ISBN 978 0 580 75968 0EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15664-1:2008+A1 November 2013 ICS 67.250 English Version Influence of metallic materials on water inte

7、nded for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation Influence des matriaux mtalliques sur leau destine la consommation humaine - Banc dessai dynamique pour lvaluation du relargage de mtaux - Partie 1 : Conception et fonctionnement Einfluss met

8、allischer Werkstoffe auf Wasser fr den menschlichen Gebrauch - Dynamischer Prfstandversuch fr die Beurteilung der Abgabe von Metallen - Teil 1: Auslegung und Betrieb This European Standard was approved by CEN on 28 October 2007 and includes Amendment 1 approved by CEN on 12 October 2013. CEN members

9、 are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application

10、to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

11、 Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lit

12、huania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17,

13、B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15664-1:2008+A1:2013 E2 Foreword This document (EN 15664-1:2008+A1:2013) has been prepared by Technical Committee CEN/TC 164 “Water supply”, the secretariat of wh

14、ich is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2014, and conflicting national standards shall be withdrawn at the latest by May 2014. Attention is drawn to the possibili

15、ty that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1 approved by CEN on 12 October 2013. This document supersedes EN 15664-1:2008. The star

16、t and finish of text introduced or altered by amendment is indicated in the text by tags . This European Standard is one of a series of test methods that supports associated product standards. The standard has been prepared under the mandate given to CEN by the Commission of the European Communities

17、 and the European Free Trade Area deleted text. With respect to potential adverse effects on the quality of water intended for human consumption caused by metallic materials, attention is drawn to the fact that the relevant national regulations remain in force until the adoption of verifiable Europe

18、an acceptance criteria. Water intended for human consumption is hereafter referred to as “drinking water” and means the same as the definition given at Article 2(1) of the Council Directive 98/83/EC on the quality of water intended for human consumption. This European Standard has been drafted in ac

19、cordance with the CEN Internal Regulations, Part 3. This European Standard is Part 1 of a series dealing with the test method to determine the release of metals from metallic products into drinking water comprising: Part 1: Design and operation; ! Part 2: Test waters.“ Part 1 describes a test method

20、 to produce contact waters for the assessment of metal release from metallic materials. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

21、 Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

22、 BS EN 15664-1:2008+A1:2013 EN 15664-1:2008+A1:2013 (E)3 Contents Page Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .7 4 Principle 9 5 Test rig 9 5.1 General 9 5.2 Test rig arrangement .9 5.3 Control line 10 5.4 Test lines . 10 5.4.1 General . 10 5.4.2 Materials in the

23、form of pipes 10 5.4.3 Materials in the form of test pieces. 10 5.5 Reference lines for comparative testing 10 6 Operating conditions 10 6.1 General . 10 6.2 Conditioning 11 6.3 Fractional Sampling . 11 6.3.1 General . 11 6.3.2 Calculation and expression of results for fractional sampling 11 6.3.3 R

24、equirements for the hydraulic function of the test rig . 13 6.3.4 Determination of sampling volumes . 13 6.4 Normal operation of the test rig 14 7 Test water 14 7.1 Composition 14 7.2 Check of test water . 14 8 Sampling 15 8.1 General . 15 8.2 Test water sampling . 15 8.3 Sampling to determine metal

25、 release . 15 8.4 Sampling volumes 16 8.4.1 General . 16 8.4.2 Test lines with test pieces . 16 8.4.3 Test pipes 16 9 Analysis . 16 10 Expression of results . 16 10.1 Metal concentrations after fixed stagnation time 16 10.2 Equivalent pipe concentration 16 10.3 Mean concentration after a given opera

26、ting time 17 10.4 Presentation of the test results . 17 11 Test report . 17 Annex A (normative) Test rig components and assembly. 19 A.1 Test rig . 19 A.2 Test piece 20 BS EN 15664-1:2008+A1:2013 EN 15664-1:2008+A1:2013 (E)4 A.3 Connecting piece . 21 Annex B (normative) Test rig flow regime 23 B.1 T

27、est rig flow regime and sampling plan (24 h cycle) . 23 B.2 Test rig flow regime and sampling plan for 16 h stagnation time 24 Annex C(normative) Test water monitoring and analysis Data on test water composition 25 Annex D (informative) Example of graphs for expression of results 27 Bibliography 30

28、BS EN 15664-1:2008+A1:2013 EN 15664-1:2008+A1:2013 (E)5 Introduction The main application of metallic materials in water supply is within the domestic installation. The test method given in this standard is designed to provide information on metal release over time from metallic materials into drink

29、ing water. The test is based on a programme of alternating periods of once-through flow and stagnation in a rig, simulating the conditions in a domestic distribution system. The test conditions are more relevant than conditions of continuous through-flow or sit and soak tests and are applicable to a

30、ll metallic materials in distribution systems. Internal corrosion of metallic products in water conveying systems generally leads to the build-up of layers, which might or might not be protective. The factors influencing corrosion are described in EN 12502-1. Type and rate of the production of corro

31、sion products and the rate of metal release can depend on: characteristics of the metallic material; characteristics of the water; design and construction; pressure testing and commissioning; operating conditions and duration of operation. Corrosion product layers begin to form as soon as a metallic

32、 material comes into contact with water. Their properties depend on the factors noted above and for a given water/material combination especially on the operating conditions. It is not possible to reproduce the conditions of an actual installation in tests by constant once-through flow or circulatio

33、n of water. The flow regime (3.16) used in this test simulates the operating conditions in domestic drinking water installations where stagnation times of water considerably exceed the times of through-flow. An assessment by testing is possible only if the influence of the flow regime (3.16) and the

34、 operation period (3.19) is taken into consideration. A compilation of data are needed, which has been determined under defined conditions over a prolonged period of time. In most cases, metal release decreases with operation time. For some alloying elements and impurities, however, an increase in t

35、heir release can be observed. BS EN 15664-1:2008+A1:2013 EN 15664-1:2008+A1:2013 (E)6 1 Scope This European Standard specifies a procedure to determine the release of metals from metallic materials used in construction products intended to come into contact with drinking water1). The test can be use

36、d for three purposes: a) assess a material as a reference material for a category of materials using the results of several investigations in different waters covering a broad range of water compositions; b) assess a material for approval by way of comparative testing; c) obtain data on the interact

37、ion of local water with a material. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the refe

38、renced document (including any amendments) applies. EN 1484, Water analysis Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) EN 10088-1, Stainless steels Part 1: List of stainless steels EN 12502-1:2004, Protection of metallic materials against corros

39、ion Guidance on the assessment of corrosion likelihood in water distribution and storage systems Part 1: General EN 25813, Water quality - Determination of dissolved oxygen Iodometric method (ISO 5813:1983) EN 25814, Water quality Determination of dissolved oxygen Electrotechnical probe method (ISO

40、5814:1990) EN 27888, Water quality Determination of electrical conductivity (ISO 7888:1985) EN ISO 6878, Water quality Determination of phosphorus Ammonium molybdate spectrometric method (ISO 6878:2004) EN ISO 8044:1999, Corrosion of metals and alloys Basic terms and definitions (ISO 8044:1999) EN I

41、SO 9963 (all parts), Water quality Determination of alkalinity (ISO 9963, all parts) EN ISO 10304-1, Water quality Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulphate ions, using liquid chromatography of ions Part 1: Method for water with low contami

42、nation (ISO 10304-1:1992) EN ISO 11885, Water quality Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy (ISO 11885:1996) 1) Water intended for human consumption is referred to as “drinking water“ and means the same as the definition given at Article 2(1) of the

43、Council Directive 98/83/EC on the quality of water intended for human consumption. Luxembourg, Office for Official Publications of the European Communities. 3 November 1998. BS EN 15664-1:2008+A1:2013 EN 15664-1:2008+A1:2013 (E)7 EN ISO 14911, Water quality Determination of dissolved Li+, Na+, NH4+,

44、 K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography Method for water and waste water (ISO 14911:1998) EN ISO 15586, Water quality Determination of trace elements using atomic absorption spectrometry with graphite furnace (ISO 15586:2003) EN ISO 17294 (all parts), Water quality Application

45、of inductively coupled plasma mass spectrometry (ICP-MS) (ISO 17294, all parts) ISO 6058, Water quality Determination of calcium content EDTA titrimetric method ISO 6059, Water quality Determination of the sum of calcium and magnesium EDTA titrimetric method ISO 9297, Water quality Determination of

46、chloride Silver nitrate titration with chromate indicator (Mohrs method) ISO 9964-3, Water quality Determination of sodium and potassium Part 3: Determination of sodium and potassium by flame emission spectrometry ISO 10523, Water quality Determination of pH 3 Terms and definitions For the purposes

47、of this document, the terms and definitions given in EN ISO 8044:1999, EN 12502-1:2004 and the following apply. 3.1 test rig assembly of test lines, control lines and where necessary reference lines together with test water inlet and discharge arrangements, see Annex A, Figure A.1 3.2 line continuou

48、s part between a check valve and the corresponding flow regulator 3.3 control line line containing a single length of pipe made of an inert material for the purposes of the test 3.4 test line line containing test pieces or a test pipe 3.5 reference line line containing test pieces each made of the s

49、ame reference material or line containing a single length of pipe made of a reference material 3.6 dummy lines pipes made of an inert material for the purposes of the test used for the conditioning run of a newly built test rig 3.7 test pipe specimen that is representative of a construction product in the form of a pipe for use with drinking water in terms of material composition and surface characteristics BS EN 15664-1:2008+A1:2013 EN 15664-1:2008+A1:2013 (E)8 3.8 test piece spe