EN 15330-1-2013 en Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1 Specification for synthetic turf surfaces for .pdf

《EN 15330-1-2013 en Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1 Specification for synthetic turf surfaces for .pdf》由会员分享，可在线阅读，更多相关《EN 15330-1-2013 en Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1 Specification for synthetic turf surfaces for .pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 15330-1:2013Surfaces for sports areas Synthetic turf and needle-punched surfaces primarilydesigned for outdoor usePart 1: Specification for synthetic turfsurfaces for football, hockey, rugby uniontraining, tennis and multi-sports useBS EN 15330-1:2013 BRITISH STANDARDN

2、ational forewordThis British Standard is the UK implementation of EN 15330-1:2013.It supersedes BS EN 15330-1:2007 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/57, Surfaces for sports areas.A list of organizations represented on this committee ca

3、n beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 78892 5ICS 97.220.10Complian

4、ce with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2013.Amendments issued since publicationDate Text affectedBS EN 15330-1:2013EUROPEAN STANDARD NORME EUROPENNE

5、EUROPISCHE NORM EN 15330-1 September 2013 ICS 97.220.10 Supersedes EN 15330-1:2007English Version Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf surfaces for football, hockey, rugby union training,

6、tennis and multi-sports use Sols sportifs - Surfaces en gazon synthtique et surfaces en textile aiguillet principalement destines lusage en extrieur - Partie 1: Spcifications relatives aux surfaces en gazon synthtique destines la pratique du football, du hockey ou du tennis, aux entranements de rugb

7、y, ou un usage multi-sports Sportbden - berwiegend fr den Auenbereich hergestellte Kunststoffrasenflchen und Nadelfilze - Teil 1: Festlegungen fr Kunststoffrasen fr Fuball, Hockey, Rugbytraining, Tennis und multifunktionale Kunststoffrasenflchen This European Standard was approved by CEN on 25 July

8、2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtaine

9、d on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-C

10、ENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, I

11、taly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: A

12、venue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15330-1:2013: EBS EN 15330-1:2013EN 15330-1:2013 (E) 2 Contents Page Foreword . 4 1 Scope 5 2 Normative references . 5 3 Terms and definitions 7

13、4 Laboratory type approval. 7 4.1 General . 7 4.2 Material tests 8 4.2.1 Tensile properties of synthetic turf carpet 8 4.2.2 Tensile strength of synthetic turf pile yarn(s) . 8 4.2.3 Resistance to artificial weathering of synthetic turf pile yarns 8 4.2.4 Synthetic turf carpet joint strength . 8 4.2

14、.5 Synthetic turf tuft bind . 8 4.2.6 Water permeability of synthetic turf surfacing system 9 4.2.7 Tensile strength of shockpads 9 4.2.8 Abrasion resistance of non-filled short pile synthetic turf surfaces . 9 4.3 Surfaces designed primarily for hockey . 9 4.3.1 General . 9 4.3.2 Vertical ball rebo

15、und 9 4.3.3 Ball roll . 9 4.3.4 Shock absorption . 9 4.3.5 Vertical deformation . 10 4.3.6 Rotational resistance . 10 4.4 Surfaces designed primarily for football . 10 4.4.1 General . 10 4.4.2 Vertical ball rebound 10 4.4.3 Ball roll . 10 4.4.4 Shock absorption . 10 4.4.5 Vertical deformation . 10 4

16、.4.6 Rotational resistance . 10 4.4.7 Resistance to simulated use 10 4.5 Surfaces designed primarily for rugby union training areas . 11 4.5.1 General . 11 4.5.2 Vertical ball rebound 11 4.5.3 Critical fall height . 11 4.5.4 Shock absorption . 11 4.5.5 Vertical deformation . 11 4.5.6 Rotational resi

17、stance . 11 4.5.7 Resistance to simulated use 11 4.6 Surfaces designed primarily for tennis . 12 4.6.1 General . 12 4.6.2 Vertical ball rebound 12 4.6.3 Angled ball behaviour 12 4.6.4 Shock absorption . 12 4.6.5 Rotational Resistance 13 4.7 Surfaces designed for multi-sports use 13 4.7.1 General . 1

18、3 4.7.2 Vertical ball rebound 13 4.7.3 Ball roll . 13 4.7.4 Shock absorption . 14 BS EN 15330-1:2013EN 15330-1:2013 (E) 3 4.7.5 Vertical deformation . 14 4.7.6 Rotational resistance . 14 4.7.7 Angled ball behaviour 15 4.7.8 Resistance to simulated use of surfaces designed to allow the use of studded

19、 footwear . 15 4.8 Product identification . 15 4.9 Test report 17 5 Site tests . 17 5.1 General . 17 5.2 Test Conditions 17 5.3 Performance requirements 18 5.3.1 Hockey pitches . 18 5.3.2 Football pitches 19 5.3.3 Rugby pitches 20 5.3.4 Tennis courts 21 5.3.5 Multi-sports fields. 22 5.4 Test report

20、26 Annex A (informative) Selection of the appropriate types of synthetic grass for various sports applications 27 Annex B (normative) Preparation of wet test pieces . 32 Annex C (informative) Information to be supplied by the manufacturer or supplier regarding maintenance . 33 Bibliography 34 BS EN

21、15330-1:2013EN 15330-1:2013 (E) 4 Foreword This document (EN 15330-1:2013) has been prepared by Technical Committee CEN/TC 217 “Surfaces for sports areas”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an

22、identical text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withdrawn at the latest by March 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held

23、 responsible for identifying any or all such patent rights. This document supersedes EN 15330-1:2007. Compared with EN 15330-1:2007, the text has been clarified and editorial errors have been corrected. EN 15330 consists of the following parts, under the general title Surfaces for sports areas Synth

24、etic turf and needle-punched surfaces primarily designed for outdoor use: Part 1: Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use; Part 2: Specification for needle-punched surfaces. According to the CEN-CENELEC Internal Regulations, t

25、he national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latv

26、ia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15330-1:2013EN 15330-1:2013 (E) 5 1 Scope This European Standard specifies performance, durability, product identification and facili

27、ty testing requirements for synthetic turf sports surfaces used primarily outdoors. Five categories of surface are covered, each based on the principal sporting use of the surface, as follows: surfaces designed primarily for hockey; surfaces designed primarily for association football; surfaces desi

28、gned primarily for rugby union for training purposes; surfaces designed primarily for tennis; surfaces designed for multi-sports use. The requirements are intended to apply to surfaces used for community, educational and recreational sport. For professional and elite levels of competition, many spor

29、ts governing bodies have published their own specifications; the requirements of the sports governing bodies might differ from those detailed in this European Standard and facility developers are advised to ensure that they select surfaces offering the correct level of performance for the level of c

30、ompetition played on the pitch or court. NOTE Under the Laws of the Game of Rugby Union, surfaces for rugby union matches need to comply with the International Rugby Boards IRB Regulation 22 and associated performance specification for synthetic turf surfaces. This European Standard has two parts. T

31、he first part describes the requirements for product testing of products in the laboratory to ensure they are capable of providing the required levels of sports performance and player/surface interaction required for their intended use and that they are manufactured from materials of acceptable qual

32、ity. The second section describes the requirements for installed surfaces to ensure that the sports performance and player/surface interaction of a facility is suitable for the intended use. Some of the surfaces covered by this European Standard are designed to allow users to wear footwear fitted wi

33、th studs. An example of a typical stud is given in EN 15306. For the purposes of this European Standard, multi-dimpled shoe profiles often found on footwear used on sand-filled or non-filled synthetic turfs are not considered to be studs. When independent third party testing of synthetic turf sports

34、 surfaces is required to assess compliance with this standard, it is recommended the laboratory is certified to EN ISO/IEC 17025 for the relevant test methods specified in this standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document

35、and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 933-1, Tests for geometrical properties of aggregates Part 1: Determination of particle size d

36、istribution Sieving method EN 1097-3, Tests for mechanical and physical properties of aggregates Part 3: Determination of loose bulk density and voids EN 1177, Impact attenuating playground surfacing Determination of critical fall height EN 1969, Surfaces for sports areas Determination of thickness

37、of synthetic sports surfaces EN 12228, Surfaces for sports areas Determination of joint strength of synthetic surfaces BS EN 15330-1:2013EN 15330-1:2013 (E) 6 EN 12229, Surfaces for sports areas Procedure for the preparation of synthetic turf and needle-punch test pieces EN 12230, Surfaces for sport

38、s areas Determination of tensile properties of synthetic sports surfaces EN 12234, Surfaces for sports areas Determination of ball roll behaviour EN 12235, Surfaces for sports areas Determination of vertical ball behaviour EN 12616, Surfaces for sports areas Determination of water infiltration rate

39、EN 13036-7, Road and airfield surface characteristics Test methods Part 7: Irregularity measurement of pavement courses : the straightedge test EN 13672, Surfaces for sports areas Determination of resistance to abrasion of non-filled synthetic turf EN 13744, Surfaces for sports areas Procedure for a

40、ccelerated ageing by immersion in hot water EN 13817, Surfaces for sports areas Procedure for accelerated ageing by exposure to hot air EN 13864, Surfaces for sports areas Determination of tensile strength of synthetic yarns EN 13865, Surfaces for sports areas Determination of angled ball behaviour

41、Tennis EN 14808, Surfaces for sports areas Determination of shock absorption EN 14809, Surfaces for sports areas Determination of vertical deformation EN 14836, Synthetic surfaces for outdoor sports areas Exposure to artificial weathering EN 14955, Surfaces for sports areas Determination of composit

42、ion and particle shape of unbound mineral surfaces for outdoor sports areas EN 15301-1, Surfaces for sports areas Part 1: Determination of rotational resistance EN 15306, Surfaces for outdoor sports areas Exposure of synthetic turf to simulated wear EN 20105-A02, Textiles Tests for colour fastness P

43、art A02: Grey scale for assessing change in colour (ISO 105-A02) EN ISO 13934-1, Textiles Tensile properties of fabrics Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1) ISO 1763, Carpets Determination of number of tufts and/or loops per unit

44、 length and per unit area ISO 2549, Textile floor coverings Hand-knotted carpets Determination of tuft leg length above the woven ground ISO 4919, Carpets Determination of tuft withdrawal force ISO 8543, Textile floor coverings Methods for determination of mass ISO 11357-3, Plastics Differential sca

45、nning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization BS EN 15330-1:2013EN 15330-1:2013 (E) 7 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 synthetic turf surface sports surface comprised o

46、f a carpet of tufted, knitted or woven construction whose pile is designed to replicate the appearance of natural grass Note 1 to entry: Not necessarily in colour. 3.2 non-filled synthetic turf synthetic turf surface that does not contain any form of unbound particulate fill within the pile of the c

47、arpet 3.3 filled synthetic turf synthetic turf surface whose pile is either totally filled or partly filled with an unbound particulate material, typically sand, rubber or sand and rubber mixes 3.4 short pile synthetic turf synthetic turf surface whose pile length is less than 30 mm when tested in a

48、ccordance with ISO 2549 3.5 long pile surfaces synthetic turf surface whose pile length is equal to or greater than 30 mm when tested in accordance with ISO 2549 3.6 surface for multi-sports synthetic turf surface designed to be used for more than one sport Note 1 to entry: For further information s

49、ee Annex A. 3.7 synthetic turf surfacing system all components of the surface that influence its sports performance or bio-mechanical characteristics including the synthetic turf carpet, infill and shockpad, together with any supporting layers designed to contribute to the performance of the surface 3.8 infill particulate materials used to infill the synthetic turf pile to provide support and aid the provision of the required performance characteristics 3.9 shockpads pre