DLA MS51821 REV E-1987 TEE PIPE TO TUBE FEMALE PIPE ON BRANCH FLARELESS TYPE HYDRAULIC [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《液压非扩口式管子承头三岔管》.pdf

《DLA MS51821 REV E-1987 TEE PIPE TO TUBE FEMALE PIPE ON BRANCH FLARELESS TYPE HYDRAULIC [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《液压非扩口式管子承头三岔管》.pdf》由会员分享，可在线阅读，更多相关《DLA MS51821 REV E-1987 TEE PIPE TO TUBE FEMALE PIPE ON BRANCH FLARELESS TYPE HYDRAULIC [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《液压非扩口式管子承头三岔管》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、o Y LSLEEVE-MS51825 I 4730 TABLE I A B D DASH NUMBER TUBE , O.D. PIPE STRAIGHT THREAD DIA THREAD NPTF CLASS 2A DRILL ASSY *BODY NOH 21 1/8 1/8 5/16-24UNF 0.093 22 3/16 3/8 -24UNF 0.125 23 U4 1/8 7/16-20UNF 0.203 24 5/16 1/8 1/2 -2OUNF 0.234 25 3/8 1/4 9/16-18UNF O. 281 26 1/2 3/8 3/4 -1UNF 0.422 27

2、5/8 i/2 7/8 -14UW 0.500 28 3/4 3/4 1-1/16-12UN 0.656 0.718 0.875 1-1/4 1 .O93 1,344 13 2-1/2 -12UN FOR NOTES SEE SHEET 2. Denotes change T f.03 I ?.O3 7 2.020 0.83 0.66 0.562 0.83 0.66 0.562 0.89 0.66 0.562 0.95 0.66 0.562 1.05 0.88 0.750 gg 1.625 2.64 2.811. - MILITARY STANDA AR 1 TITLE A. r. Co cn

3、 O M Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS.51821 REV E 47 W 9999912 0011025 2 W FED. SUE CLASS 47 30 NOTES: 1. MATERIAL: Steel, carbon in accordance with procurement specification. Steel, corrosion-resisting in accordance with procuremen

4、t specification, i 2. PROTECTIVE COATING: Cadmium plated in accordance with procurement specification. si4 *U7 .3 .Co Zinc plated in accordance with procurement specification. Phosphate coating in accordance with procurement specification. Passivation treatment in accordance with procurement specifi

5、cation. UI I U2a B 3. DIMENSIONS AND TOLERANCES: Dimensions and tolerances not shown shall be in accordance with 4. the SAE Standard for Flareless Tube Fittings (SM 5514). Threads shall be in accordance with Screw-Thread Standards for Federal Services, THREADS: FED-STD-H28. 5. PART NMBER: The MS par

6、t number consists of the MS number, plus the dash number and (for complete assembly) the applicable MS51825 sleeve style designator. A. For complete assembly (with nuts and sleeves), cadmium plated, use the MS number, plus the assembly dash numberand the sleeve style designator. Example : For the bo

7、dy only, cadmium plated, use the MS number and the body dash number. Example: MS51821-21. MS5 182 1 - 1A or MS5 182 1 - 1 B a B. C. For zinc coating add “2“ and (for complete assembly) the sleeve style designator to the dash number. Example: MS51821-1ZA or MS51821-1ZB or MS5 182 1-2 12. D. For phosp

8、hate coating add llPl and (for complete assembly) the sleeve style designator to the dash number. Example: MS51821-1PA or MS51821-1PB or MS51821-21P. E. For corrosion-resisting steel add “SS“ and (for complete assembly) the sleeve style designator to the dash number. Example: MS51821-1SSA or MS51821

9、-1SSB or MS51821-21SS. 6. 7. 8. For design feature purposes, this standard takes precedence over procurement documents refer- enced herein. Reference documents shall be of the issue in effect on date of invitations for bid, The illustration is for identification and is not intended to restrict desig

10、ns or shapes not dimensioned, * 9, After22 NOW 1974 for maintenancc. , bodies will be used for production only and SHALL NOT be stocked Existing stock of bodies should be used until depleted. 10. CAUTIUN: tended to imply interchangeability. The following data ia furnished for the purpose of new desi

11、gn only and is not in- MS51821 will replace MS39208 for new design after approval date on this document. Table II below gives reference data for coordination of equivalent tube aizea, in both compression and hydraulic type tees. Assembly replacement is authorized. TABLE II (FOR INFORMATION ONLY) ASS

12、EMBLY EQUIVALENCY PART PART NUMBER !OMPRESSION HYDRAULIC COMPRESSION HYDRAULIC COMPRESSION HYDRAULIC MS39208-1 MS51821-1 MS39208-5 M651821-5 MS 3 9 2 O 8- 9 MS51821-9 -3 -3 -1 -1 -11 -1 1 -2 -2 -6 -6 -10 -10 1 I I -4 -4 -8 - I -12 -12 - - A- AR TITLE MI1 IT ARY ST AN DARD heiCwi 99 TEE, PIPE TO TUBE

13、, AIS51821 FEMALE PIPE ON BRANCH, FLARELESS TYPE, HYDRAULIC fOCUREMENT SPECIFICATION UIPERSEDE): CNHX10 in part and 10.1 in part SHEET 2 f 2 4730-0887 D I:!:, 672-1 (Coordinated) WIL-F-18866 muioum twviow or TWI romu AMI omIoLIvg, Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-