书签分享收藏举报版权申诉 / 12

立即下载加入VIP,交流精品资源

当前位置：首页 > 标准规范 > 国际标准 > 其他 > DLA MS8005 REV D (1)-2005 HOSE ASSEMBLY POLYTETRAFLUOROETHYLENE PERMANENTLY ATTACHED FITTINGS HIGH TEMPERATURE MEDIUM PRESSURE FLARE-TO-FLARE《耀斑对耀斑中压高温可重复使用永久配件聚四氟乙烯软管组件》.pdf

DLA MS8005 REV D (1)-2005 HOSE ASSEMBLY POLYTETRAFLUOROETHYLENE PERMANENTLY ATTACHED FITTINGS HIGH TEMPERATURE MEDIUM PRESSURE FLARE-TO-FLARE《耀斑对耀斑中压高温可重复使用永久配件聚四氟乙烯软管组件》.pdf

上传人：inwarn120

文档编号：693861

上传时间：2018-12-30

格式：PDF

页数：12

大小：374.66KB

《DLA MS8005 REV D (1)-2005 HOSE ASSEMBLY POLYTETRAFLUOROETHYLENE PERMANENTLY ATTACHED FITTINGS HIGH TEMPERATURE MEDIUM PRESSURE FLARE-TO-FLARE《耀斑对耀斑中压高温可重复使用永久配件聚四氟乙烯软管组件》.pdf》由会员分享，可在线阅读，更多相关《DLA MS8005 REV D (1)-2005 HOSE ASSEMBLY POLYTETRAFLUOROETHYLENE PERMANENTLY ATTACHED FITTINGS HIGH TEMPERATURE MEDIUM PRESSURE FLARE-TO-FLARE《耀斑对耀斑中压高温可重复使用永久配件聚四氟乙烯软管组件》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、 MS8005D w/AMENDMENT 1 09 September 2005 SUPERSEDING MS8005D 24 September 2003 DETAIL SPECIFICATION SHEET HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLARE This specification is approved for use by all Departments and Agencies of

2、 the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-25579. Hose assembly dimensions for style A: See table l. TABLE I. Hose assembly dimensions for style A. 1/ 1/ Style A uses class 1 fittings which are made fr

3、om corrosion resistant steel (CRES). Fitting ends Dimensions 2/ 1 2 Hose size A (nom) B ( max) C (max) F (max) 3/4 0.372 1.049 0.620 0.580 4 0.375 1.049 0.620 0.6545 0.380 1.194 0.680 0.726 6 0.380 1.303 0.750 0.798Straight Straight 8 0.438 1.465 0.880 1.014 10 0.515 1.680 0.967 1.15812 0.570 1.727

4、1.122 1.447 16Z 0.620 2.101 1.480 1.73620Z 0.640 2.255 1.750 2.328 24Z 0.765 2.400 2.150 2.621INCH-POUND2/ Dimensions are shown on figure 1. FIGURE 1. Style A hose assembly. AMSC N/A FSC 4720 Source: http:/assist.daps.dla.mil - Downloaded: 2005-09-30T07:33ZCheck the source to verify that this is the

5、 current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8005D w/AMENDMENT 1 2 Hose assembly dimensions for style B: See table II. TABLE II. Hose assembly dimensions for style B. 1/ 1/ Style B uses class 1 fittings which are made

6、 from CRES. 2/ Dimensions are shown on figure 2. FIGURE 2. Style B hose assembly. Hose assembly dimensions for style C: See table III. TABLE III. Hose assembly dimensions for style C. 1/ 1/ Style C uses class 1 fittings which are made from CRES. Fitting ends Dimensions 2/ 1 2 Hose size A (nom) B (ma

7、x) C (max) D (max) E (max) F (max) G (min) G (max)3/4 0.372 1.049 0.620 1.240 0.921 0.580 0.263 0.388 4 0.375 1.049 0.620 1.490 0.979 0.654 0.302 0.427 5 0.380 1.194 0.680 1.495 1.009 0.726 0.320 0.445 6 0.380 1.303 0.750 1.610 1.079 0.798 0.369 0.494 Straight 45 8 0.438 1.465 0.880 1.722 1.332 1.01

8、4 0.445 0.632 10 0.515 1.680 0.967 2.037 1.488 1.158 0.501 0.688 12 0.570 1.727 1.122 2.368 1.667 1.447 0.588 0.775 16Z 0.620 2.101 1.480 2.583 1.879 1.736 0.609 0.857 20Z 0.640 2.255 1.750 2.946 2.058 2.328 0.697 1.017 24Z 0.765 2.400 2.150 3.210 2.400 2.621 0.785 1.127 Fitting ends Dimensions 2/ 1

9、 2 Hose size A (nom) B (max) C (max) F (max) H (max) J (max) K (min) K (max)3/4 0.372 1.049 0.620 0.580 1.845 1.320 0.510 0.635 4 0.375 1.049 0.620 0.654 1.885 1.370 0.560 0.685 5 0.380 1.194 0.680 0.726 1.980 1.542 0.635 0.822 6 0.380 1.303 0.750 0.798 2.205 1.640 0.700 0.885 Straight 90 8 0.438 1.

10、465 0.880 1.014 2.495 1.938 0.810 1.060 10 0.515 1.680 0.967 1.158 2.955 2.340 1.091 1.341 12 0.570 1.727 1.122 1.447 3.705 2.722 1.341 1.591 16Z 0.620 2.101 1.480 1.736 4.100 3.075 1.465 1.715 20Z 0.640 2.255 1.750 2.328 4.835 3.637 1.747 2.122 24Z 0.765 2.400 2.150 2.621 5.480 4.212 1.997 2.372 2/

11、 Dimensions are shown on figure 3. Source: http:/assist.daps.dla.mil - Downloaded: 2005-09-30T07:33ZCheck the source to verify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8005D w/AMENDMENT 1 3 FIGURE

12、3. Style C hose assembly. Hose assembly dimensions for style D: See table IV. TABLE IV. Hose assembly dimensions for style D. 1/ 1/ Style D uses class 1 fittings which are made from CRES. Fitting ends Dimensions 2/ 1 2 Hose size A (nom) C (max) D (max) E (max) F (max) G (min) G (max) 3/4 0.372 0.620

13、 1.240 0.921 0.580 0.263 0.388 4 0.375 0.620 1.490 0.979 0.654 0.302 0.427 5 0.380 0.680 1.495 1.009 0.726 0.320 0.445 6 0.380 0.750 1.610 1.079 0.798 0.369 0.494 45 45 8 0.438 0.880 1.722 1.332 1.014 0.445 0.632 10 0.515 0.967 2.037 1.488 1.158 0.501 0.688 12 0.570 1.122 2.368 1.667 1.447 0.588 0.7

14、75 16Z 0.620 1.480 2.583 1.879 1.736 0.609 0.857 20Z 0.640 1.750 2.946 2.058 2.328 0.697 1.017 24Z 0.765 2.150 3.210 2.400 2.621 0.785 1.127 2/ Dimensions are shown on figure 4. FIGURE 4. Style D hose assembly. Source: http:/assist.daps.dla.mil - Downloaded: 2005-09-30T07:33ZCheck the source to veri

15、fy that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8005D w/AMENDMENT 1 4 Hose assembly dimensions for style E: See table V. TABLE V. Hose assembly dimensions for style E. 1/ 1/ Style E uses class 1 fittin

16、gs which are made from CRES. 2/ Dimensions are shown on figure 5. FIGURE 5. Style E hose assembly. Hose assembly dimensions for style F: See table VI. TABLE VI. Hose assembly dimensions for style F. 1/ 1/ Style F uses class 1 fittings which are made from CRES. Dimensions 2/ Fitting ends 1 2 Hose siz

17、e A (nom) C (max) D (max)E (max)F (max)G (min) G (max)H (max) J (max) K (min) K (max)3/4 0.372 0.620 1.240 0.921 0.580 0.263 0.388 1.845 1.320 0.510 0.6354 0.375 0.620 1.490 0.979 0.654 0.302 0.427 1.885 1.370 0.560 0.6855 0.380 0.680 1.495 1.009 0.726 0.320 0.445 1.980 1.542 0.635 0.8226 0.380 0.75

18、0 1.610 1.079 0.798 0.369 0.494 2.205 1.640 0.700 0.88545 90 8 0.438 0.880 1.722 1.332 1.014 0.445 0.632 2.495 1.938 0.810 1.06010 0.515 0.967 2.037 1.488 1.158 0.501 0.688 2.955 2.340 1.091 1.34112 0.570 1.122 2.368 1.667 1.447 0.588 0.775 3.705 2.722 1.341 1.59116Z 0.620 1.480 2.583 1.879 1.736 0.

19、609 0.857 4.100 3.075 1.465 1.71520Z 0.640 1.750 2.946 2.058 2.328 0.697 1.017 4.835 3.637 1.747 2.12224Z 0.765 2.150 3.210 2.400 2.621 0.785 1.127 5.480 4.212 1.997 2.372Fitting ends Dimensions 2/ 1 2 Hose size A (nom) C (max) F (max) H (max) J (max) K (min) K (max) 3/4 0.372 0.620 0.580 1.845 1.32

20、0 0.510 0.635 4 0.375 0.620 0.654 1.885 1.370 0.560 0.685 5 0.380 0.680 0.726 1.980 1.542 0.635 0.822 6 0.380 0.750 0.798 2.205 1.640 0.700 0.885 90 90 8 0.438 0.880 1.014 2.495 1.938 0.810 1.060 10 0.515 0.967 1.158 2.955 2.340 1.091 1.341 12 0.570 1.122 1.447 3.705 2.722 1.341 1.591 16Z 0.620 1.48

21、0 1.736 4.100 3.075 1.465 1.715 20Z 0.640 1.750 2.328 4.835 3.637 1.747 2.122 24Z 0.765 2.150 2.621 5.480 4.212 1.997 2.372 2/ Dimensions are shown on figure 6. Source: http:/assist.daps.dla.mil - Downloaded: 2005-09-30T07:33ZCheck the source to verify that this is the current version before use.Pro

22、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8005D w/AMENDMENT 1 5 FIGURE 6. Style F hose assembly. Hose assembly dimensions for style G: See table VII. TABLE VII. Hose assembly dimensions for style G. 1/ 1/ Style G uses class 2 fittings which are

23、made from a combination of aluminum and CRES. Fitting ends Dimensions 2/ 1 2 Hose size A (nom) B ( max) C (max) F (max) 8 0.438 1.465 0.880 1.014 10 0.515 1.680 0.967 1.158Straight Straight 12 0.570 1.727 1.122 1.447 16Z 0.620 2.101 1.480 1.73620Z 0.640 2.255 1.750 2.328 24Z 0.765 2.400 2.150 2.6212

24、/ Dimensions are shown on figure 7. FIGURE 7. Style G hose assembly. Source: http:/assist.daps.dla.mil - Downloaded: 2005-09-30T07:33ZCheck the source to verify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,

25、-,-MS8005D w/AMENDMENT 1 6 Hose assembly dimensions for style H: See table VIII. TABLE VIII. Hose assembly dimensions for style H. 1/ 1/ Style H uses class 2 fittings which are made from a combination of aluminum and CRES. 2/ Dimensions are shown on figure 8. FIGURE 8. Style H hose assembly. Hose as

26、sembly dimensions for style J: See table IX. TABLE IX. Hose assembly dimensions for style J. 1/ 1/ Style J uses class 2 fittings which are made from a combination of aluminum and CRES. Fitting ends Dimensions 2/ 1 2 Hose size A (nom) B (max) C (max) D (max) E (max) F (max) G (min) G (max)8 0.438 1.4

27、65 0.880 1.722 1.332 1.014 0.445 0.632 10 0.515 1.680 0.967 2.037 1.488 1.158 0.501 0.688 Straight 45 12 0.570 1.727 1.122 2.368 1.667 1.447 0.588 0.775 16Z 0.620 2.101 1.480 2.583 1.879 1.736 0.609 0.857 20Z 0.640 2.255 1.750 2.946 2.058 2.328 0.697 1.017 24Z 0.765 2.400 2.150 3.210 2.400 2.621 0.7

28、85 1.127 Fitting ends Dimensions 2/ 1 2 Hose size A (nom) B (max) C (max) F (max) H (max) J (max) K (min) K (max)8 0.438 1.465 0.880 1.014 2.495 1.938 0.810 1.060 10 0.515 1.680 0.967 1.158 2.955 2.340 1.091 1.341 Straight 90 12 0.570 1.727 1.122 1.447 3.705 2.722 1.341 1.591 16Z 0.620 2.101 1.480 1

29、.736 4.100 3.075 1.465 1.715 20Z 0.640 2.255 1.750 2.328 4.835 3.637 1.747 2.122 24Z 0.765 2.400 2.150 2.621 5.480 4.212 1.997 2.372 2/ Dimensions are shown on figure 9. Source: http:/assist.daps.dla.mil - Downloaded: 2005-09-30T07:33ZCheck the source to verify that this is the current version befor

30、e use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8005D w/AMENDMENT 1 7 FIGURE 9. Style J hose assembly. Hose assembly dimensions for style K: See table X. TABLE X. Hose assembly dimensions for style K. 1/ 1/ Style K uses class 2 fittings which

31、 are made from a combination of aluminum and CRES. Fitting ends Dimensions 2/ 1 2 Hose size A (nom) C (max) D (max) E (max) F (max) G (min) G (max) 8 0.438 0.880 1.722 1.332 1.014 0.445 0.632 10 0.515 0.967 2.037 1.488 1.158 0.501 0.688 45 45 12 0.570 1.122 2.368 1.667 1.447 0.588 0.775 16Z 0.620 1.

32、480 2.583 1.879 1.736 0.609 0.857 20Z 0.640 1.750 2.946 2.058 2.328 0.697 1.017 24Z 0.765 2.150 3.210 2.400 2.621 0.785 1.127 2/ Dimensions are shown on figure 10. FIGURE 10. Style K hose assembly. Source: http:/assist.daps.dla.mil - Downloaded: 2005-09-30T07:33ZCheck the source to verify that this

33、is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8005D w/AMENDMENT 1 8 Hose assembly dimensions for style M: See table XI. TABLE XI. Hose assembly dimensions for style M. 1/ 1/ Style M uses class 2 fittings which ar

34、e made from a combination of aluminum and CRES. 2/ Dimensions are shown on figure 11. FIGURE 11. Style M hose assembly. Hose assembly dimensions for style N: See table XII. TABLE XII. Hose assembly dimensions for style N. 1/ 1/ Style N uses class 2 fittings which are made from a combination of alumi

35、num and CRES. Dimensions 2/ Fitting ends 1 2 Hose size A (nom)C (max) D (max)E (max)F (max)G (min) G (max)H (max) J (max) K (min)K (max)8 0.438 0.880 1.722 1.332 1.014 0.445 0.632 2.495 1.938 0.810 1.06010 0.515 0.967 2.037 1.488 1.158 0.501 0.688 2.955 2.340 1.091 1.34145 90 12 0.570 1.122 2.368 1.

36、667 1.447 0.588 0.775 3.705 2.722 1.341 1.59116Z 0.620 1.480 2.583 1.879 1.736 0.609 0.857 4.100 3.075 1.465 1.71520Z 0.640 1.750 2.946 2.058 2.328 0.697 1.017 4.835 3.637 1.747 2.12224Z 0.765 2.150 3.210 2.400 2.621 0.785 1.127 5.480 4.212 1.997 2.372Fitting ends Dimensions 2/ 1 2 Hose size A (nom)

37、 C (max) F (max) H (max) J (max) K (min) K (max) 8 0.438 0.880 1.014 2.495 1.938 0.810 1.060 10 0.515 0.967 1.158 2.955 2.340 1.091 1.341 90 90 12 0.570 1.122 1.447 3.705 2.722 1.341 1.591 16Z 0.620 1.480 1.736 4.100 3.075 1.465 1.715 20Z 0.640 1.750 2.328 4.835 3.637 1.747 2.122 24Z 0.765 2.150 2.6

38、21 5.480 4.212 1.997 2.372 2/ Dimensions are shown on figure 12. Source: http:/assist.daps.dla.mil - Downloaded: 2005-09-30T07:33ZCheck the source to verify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-M

39、S8005D w/AMENDMENT 1 9 FIGURE 12. Style N hose assembly. Protective sleeve code: See table XIII. TABLE XIII. Protective sleeve code. Code Type A SAE AS1072 sleeve, fire protection, silicone covered, temperature ranging from -65F to 450F and intermittently to 500F, secured with CRES bands as required

40、. 1/ B SAE AS1073 - code B sleeve, abrasion protection, heat shrinkable, black polyolefin, temperature ranging from -65F to 250F. C SAE AS1291 - code A sleeve, chafe guard, extruded seamless white PTFE, temperature ranging from -65F to 450F, secured with CRES bands as required. D SAE AS1291 - code C

41、 sleeve, chafe guard, extruded seamless transparent FEP, temperature ranging from -65F to 350F, secured with CRES bands as required. E SAE AS1298 sleeve, heavy wall chafe guard, extruded seamless black PTFE, temperature ranging from -65F to 450F, secured with CRES bands as required. L Lock-wire hole

42、 F Code A + L G Code B + L H Code C + L J Code D + L K Code E + L 1/ To prevent wicking of fluids, the cut end of the fire protective sleeve (code A) shall be coated with Room Temperature Vulcanized (RTV) silicone rubber prior to installation. After installation, cracks and voids in the fire protect

43、ive sleeve shall be coated with RTV rubber to prevent exposure of fiberglass. Source: http:/assist.daps.dla.mil - Downloaded: 2005-09-30T07:33ZCheck the source to verify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license f

44、rom IHS-,-,-MS8005D w/AMENDMENT 1 10 Hose assembly size code: See table XIV. TABLE XIV. Hose assembly size code. Size Reference tube OD Size code 3/4 1/ B 4 0.250 E5 0.313 F6 0.375 G 8 0.500 H10 0.625 J12 0.750 K 16Z 1.000 M20Z 1.250 N24Z 1.500 P 1/ Size 3/4 hose assembly consists of a size 4 tube O

45、D hose assembled with size 3 tube OD fittings. REQUIREMENTS Dimensions: Unless otherwise specified, all dimensions are in inches. Dimensions “E (max)” and “J (max)” are installation dimensions and not design dimensions. Fittings: The swivel nut and cone seat shall mate with SAE AS4395 fitting. The s

46、wivel nut threads shall be in accordance with SAE AS8879. Assembly classification: Class 1 and class 2 hose assemblies, as specified in MIL-DTL-25579, have been incorporated into the Part or Identifying Number (PIN) as a part of styles. Angular alignment: Hose assemblies with elbow fittings on each

47、end shall have the angular orientation between the elbows measured counter-clockwise from the centerline of the nearest fitting, positioned at six-oclock, to the centerline of the other fitting (see figure 13). When applicable, the angular alignment shall be expressed in three digits and specified i

48、n the PIN. Protective sleeve: If required, the hose assembly shall include a protective sleeve (see table XIII) and its code shall be included in the PIN. Fire protective sleeve shall be subjected to testing in accordance with MIL-DTL-25579. Assembly length: Hose assembly shall be furnished in lengths as specified in the contract or purchase order (see MIL-DTL-25579); however, tolerances on the length of each hose assembly shall be as follows: a. 1/8 inch for lengths under 18 inches. b. 1/4 inch for lengths from 18 inches to 36 inches. c. 1/2 inch for lengths from 36 inches to 50

下载提示：本站仅提供存储空间/不修改/不编辑

1.请仔细阅读文档，确保文档完整性，对于不预览、不比对内容而直接下载带来的问题本站不予受理。
2.下载的文档，不会出现我们的网址水印。
3、该文档所得收入（下载+内容+预览）归上传者、原创作者；如果您是本文档原作者，请点此认领！既往收益都归您。

同意并开始全文预览

文档包含非法信息？点此举报后获取现金奖励！

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

10000 积分 0人已下载

下载	加入VIP,交流精品资源

版权申诉 word格式文档无特别注明外均可编辑修改；预览文档经过压缩，下载后原文更清晰！ 立即下载

配套讲稿：: 如PPT文件的首页显示word图标，表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
特殊限制：: 部分文档作品中含有的国旗、国徽等图片，仅作为作品整体效果示例展示，禁止商用。设计者仅对作品中独创性部分享有著作权。
关键词：: DLAMS8005REVD12005HOSEASSEMBLYPOLYTETRAFLUOROETHYLENEPERMANENTLYATTACHEDFITTINGSHIGHTEMPERATUREMEDIUMPRESSUREFLARETOFLARE

麦多课文档分享所有资源均是用户自行上传分享，仅供网友学习交流，未经上传用户书面授权，请勿作他用。

关于本文

本文标题：DLA MS8005 REV D (1)-2005 HOSE ASSEMBLY POLYTETRAFLUOROETHYLENE PERMANENTLY ATTACHED FITTINGS HIGH TEMPERATURE MEDIUM PRESSURE FLARE-TO-FLARE《耀斑对耀斑中压高温可重复使用永久配件聚四氟乙烯软管组件》.pdf
链接地址：http://www.mydoc123.com/p-693861.html