DLA A-A-50212 A-1988 PARALLEL RULERS FOLDING TYPE《折叠式平行规》.pdf

《DLA A-A-50212 A-1988 PARALLEL RULERS FOLDING TYPE《折叠式平行规》.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-50212 A-1988 PARALLEL RULERS FOLDING TYPE《折叠式平行规》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、Size 06, 12, 15, 18 or 24 Class 1 or 2 CID identification nmbr A-A-50212A 66 W 7739774 0010Lbll 9-21-13 I I A-A-50212A 18 Mav 1988 SUPELECEDING A-A-50212 July 28, 1983 me General services Administration has authorized the use of this cuxrmiercial item description h preference to Federal Specificatio

2、n GDP-118. This description wvers Stepping or folding parallel rulers used in general drafting and navigation to draw and lay out parallel lines. Salient characteristics: Desicm. The parallel rulers shall consist of two parallel blades linked together by two or three bars. spreading and friction pa

3、misture content 6-14 perCent. Plastic - Molded styrene-butaaiene. Class. 1 - Wood - The blade shall be one conthums piece of harotwood. 2 - Plastic - The blade shall be one conthums piece of plastic. Part number. The document part nunter for the parallel ruler shall be as follaws: AMSC N/A FSC 6675

4、DISTRION STATEMWT A. Approved for public release; distribution iS unlimited. r THIS DOCUMENT CONTAINS PAGES. - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-502- 6 12 15 18 24 - Size. !he ruiem shall be furnished in the follawing sizes: 1-1/4 3

5、/16 1-1/4 3/16 1-1/4 3/16 1-1/4 3/16 1-1/2 3/16 06 12 15 18 24 7 Bars. Metal or plastic. Ruler sized 6 thmucpl 18 shall have two bars. Rulerc size 24 shall have three bars. Friction mds. One pad attached to the underside of each blade near each en. -center of each blade. min true to their cueranon p

6、lane, an the ruling pdse of bath blades shall be parallel within 0.01 inch per foot of length at all positions. On ruler sizes 12 through 24, an additional pad attached mar the Acicuracy. whenthe- t is in Workirq pition, the blades shall lato inmenix. me offeror/contractor is encowaged to use recove

7、red I =iaiyh?mKdance with public Law 94-580 to the mximn extent prackicable. paka-inq an marw. Military pakging shall be specified wen shipwnts are shim to overseas Department of Defence (bD) consignees. conmiercial packaging my be specified for shipm3-k to DOD consignees within the continmtal Unite

8、d Stah and to mn-DOD consignees worldwide. will satisfy the requirements for mili- packaging, it may be uced. Militarv Da ckacring. Each parailel ruler shall be preserved and paw to protect against physical damage and deterioration h a logistic envhnment characterized by the follciwing: When a -lier

9、s mnnal packaging 1. Mutiple hanaihg during transportation and in-transit storage. 2. shock, vibration, and static loam forces during worldwide additional marking shall be as specified in the contract or order. Markings shall be amlied in a legible manner, in a contrasting color, of an appropriate s

10、ize, and of waterproof materials. -li* accurance. ach parallel ruler shall be examined for the foming defects. Exterior packs shall have in addition the ampiete consigneels adress. mesence of one or mre defects shall be cause for rejection. 1. 2. 3. 4. 5. 6. 7. a. mign not as specified. mterial not

11、as specified. Class not as specified. Size(s) not as specified. Bars not as specified. Friction pads not as specified. Accuracy not as specified. packaging an marking not as specified. Certification of cammercia item. menmient appmval that the prduct offered to the Govenmient meets the salient chrac

12、teristicc of this description and that the product confoms to the producerls awn drawings, specifications, standards, and quality accurance practices and is the came product as the nianufac;turerls carrent p-ct offered by the contractor in the ccnmnercial market place for at least one year preceding

13、 the solicitation. conformance prior to first delivery and thereafter as may be atherwise provided for under the provisions of the contract. Small business. ccsmmercial-item requirement of this damnent, may make an offer under this solicitation; and, if such small business is the apparent successful

14、 offeror, the Goverrmient may require the small business to sukanit a sample folding type parallel ruler. if time to contract award pemiitC. Such evaluation would be to detemhe conformance to all r-uirements of this ccsmmercial item description and to dekmhe equivalency to parallel rulers available

15、in the ccamnercial marketplace in the areas of aurability, hmm factors engineering, and safety. It should be nie contractor shall furnish certification for Tfie Gaverrmient resemes the right to require proof of such A small business that cannot meet the certification-of- Any such parallel ruler may

16、be evaluated for this solicitation 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-nutecl that bid qles are not required unlecc specifically requected by the mtmcting offim. Note. Te Goverment may elect not to evaluate a bid saple Em an apparent lu

17、w bidder for award for this solicitation if a detennhtion of myency is made by the contracthg officer. The bid sample would then be evaluated prior to future solicitation for canrparable items. Notres: 1, chderhg activity shall specis class and size. 2, when this ccamnercial item description is used

18、 for procurement, the cceranercial item certification clause must appear in the solicitation. 3, FiclUr: The figure shuws the basic design for a parailel niler which has been faund acceptable; hawever, the fim is for iilustration only and of other designs which conform is imt intended to preclude th

19、e furnishuig to the salient characteristics. e. custodians Air Fo - 99 wiew activity DIA - Gs Air Fo - 82 GSA-FOGC vA-Os!?l Pm-jeCt 6675-0813 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50212A bb m 7777774 OOLOLb 5 A-A-50212A O 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-