DIN EN ISO 105-X18-2007 Textiles - Tests for colour fastness - nPart X18 Assessment of the potential to phenolic yellowing of materials (ISO 105-X18 2007) English version of DIN EN.pdf

《DIN EN ISO 105-X18-2007 Textiles - Tests for colour fastness - nPart X18 Assessment of the potential to phenolic yellowing of materials (ISO 105-X18 2007) English version of DIN EN.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 105-X18-2007 Textiles - Tests for colour fastness - nPart X18 Assessment of the potential to phenolic yellowing of materials (ISO 105-X18 2007) English version of DIN EN.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、December 2007DEUTSCHE NORM English price group 7No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 59.080.01!$J=“1398826w

2、ww.din.deDDIN EN ISO 105-X18Textiles Tests for colour fastness Part X18: Assessment of the potential to phenolic yellowing of materials(ISO 105-X18:2007)English version of DIN EN ISO 105-X18:2007-12Textilien Farbechtheitsprfungen Teil X18: Bestimmung der Mglichkeit der Vergilbung durch Phenole (ISO

3、105-X18:2007)Englische Fassung DIN EN ISO 105-X18:2007-12www.beuth.deDocument comprises 8 pagesDIN EN ISO 105-X18:2007-12 2 National foreword This standard has been prepared by Technical Committee ISO/TC 38 “Textiles” in collaboration with Technical Committee CEN/TC 248 “Textiles and textile product

4、s” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Materialprfung (Materials Testing Standards Committee), Technical Committee NA 062-05-11 AA Farbechtheit von Textilien Deutsche Echtheitskommission DEK. The DIN Standards correspond

5、ing to the International Standards referred to in clause 2 of the EN are as follows: ISO 105-A01 DIN EN ISO 105-A01 ISO 105-A03 DIN EN 20105-A03 ISO 105-A04 DIN EN ISO 105-A04 National Annex NA (informative) Bibliography DIN EN ISO 105-A01, Textiles Tests for colour fastness Part A01: General princi

6、ples of testing DIN EN 20105-A03, Textiles Tests for colour fastness Part A03: Grey scale for assessing staining DIN EN ISO 105-A04, Textiles Tests for colour fastness Part A04: Method for the instrumental assess-ment of the degree of staining of adjacent fabrics EUROPEAN STANDARD NORME EUROPENNE EU

7、ROPISCHE NORM EN ISO 105-X18 September 2007 ICS 59.080.01 English Version Textiles - Tests for colour fastness - Part X18: Assessment of the potential to phenolic yellowing of materials (ISO 105-X18:2007) Textiles - Essais de solidit des teintures - Partie X18: valuation de la sensibilit au jaunisse

8、ment phnolique des matriaux (ISO 105-X18:2007) Textilien - Farbechtheitsprfungen - Teil X18: Bestimmung der Mglichkeit der Vergilbung durch Phenole (ISO 105-X18:2007) This European Standard was approved by CEN on 27 August 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulatio

9、ns which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This Euro

10、pean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the na

11、tional standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and

12、 United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1

13、05-X18:2007: EForeword This document (EN ISO 105-X18:2007) has been prepared by Technical Committee ISO/TC 38 “Textiles“ in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products“, the secretariat of which is held by BSI. This European Standard shall be given the status of

14、a national standard, either by publication of an identical text or by endorsement, at the latest by March 2008, and conflicting national standards shall be withdrawn at the latest by March 2008. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

15、countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

16、 Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 105-X18:2007 has been approved by CEN as a EN ISO 105-X18:2007 without any modification. 2 EN ISO 105-X18:2007 (E) 1 Scope This part of ISO 105 specifies a method intended for assessment of the potential to phenol

17、ic yellowing of textile materials. The method is specific to phenolic yellowing and does not cover the many other possible causes of yellow discolouration found on textile materials. NOTE Use of the method does not guarantee that the materials tested will not exhibit yellowing in some form. It is in

18、tended as a screening test which, in practice, has been found to significantly reduce the number of complaints of phenolic yellowing by enabling corrective action to be taken with materials which, after testing, exhibit yellowing. 2 Normative references The following referenced documents are indispe

19、nsable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 105-A01, Textiles Tests for colour fastness Part A01: General principles of testing ISO 105

20、-A03, Textiles Tests for colour fastness Part A03: Grey scale for assessing staining ISO 105-A04, Textiles Tests for colour fastness Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics 3 Terms and definitions For the purposes of this document, the following

21、 terms and definitions apply. 3.1 phenolic yellowing discolouration of textile materials caused by the action of oxides of nitrogen and phenolic compounds, which lead to the production of a yellow colour 3.2 potential to phenolic yellowing possibility or capability of phenolic yellowing 3 EN ISO 105

22、-X18:2007 (E) 4 Principle A test package is prepared, consisting of test papers, test specimens and one control fabric. Each specimen and the control fabric are individually placed between a folded test paper placed between two glass plates in a horizontal formation. The stack of plates, test papers

23、, specimens and control fabric is then wrapped firmly in BHT (butyl hydroxytoluene) free polyethylene film to create an airtight package. The package is loaded in a test device, which is placed in an incubator/oven, for a specified time at a specific temperature. On removal of the package from the i

24、ncubator/oven and test device, it is allowed to cool. The package is opened, and the control fabric and specimens are assessed immediately by comparison with the grey scale for assessing staining. 5 Test specimens 5.1 Select the specimens to represent the sample, or as agreed between the interested

25、parties. 5.2 If yarn or fibre is to be tested, then take a mass of the yarn or loose fibre that is sufficient to form by hand a mat of material approximately 100 mm 30 mm. 6 Apparatus 6.1 Glass plates, each (100 1) mm (40 1) mm (3 0,5) mm. Clean the glass plates thoroughly between each test, using a

26、 cleaner that does not leave a residue (e.g. alcohol). 6.2 Incubator or oven, to maintain (50 3) C. 6.3 Test device, consisting of a stainless-steel frame into which a weight of mass (5 0,1) kg and base of minimum (60 115) mm is closely fitted. The test device shall be constructed so that, if the we

27、ight is removed during the test, the pressure applied to the specimens remains unchanged. 7 Materials 7.1 Test papers1), (100 2) mm (75 2) mm, density (88 7) g/m2at 20 C, of 98 % pure cellulose treated with 0,1 % 2,6-di-tert-butyl-4-nitrophenol to give a Grey Scale for Staining Grade 3 or worse (i.e

28、. 2/3, 2, etc.) on the control fabric. Use new test papers for each test. Store the test papers in resealable aluminium foil packaging in a cool dry environment or conditioned laboratory. Use within 6 months of opening. NOTE It is advisable to wear protective gloves when handling. 1) Test papers and control fabrics may be purchased from the following sources: James H Heal b) identification of the test sample and sampling procedure, if required; c) the numerical grey scale rating for staining to express the potential of phenolic yellowness of materials. 6 EN ISO 105-X18:2007 (E)