DIN EN 54-24-2008 Fire detection and fire alarm systems - Part 24 Components of voice alarm systems - Loudspeakers English version of DIN EN 54-24 2008-06《火灾检测和报警系统 第24部分 声音报警系统的组件.pdf

《DIN EN 54-24-2008 Fire detection and fire alarm systems - Part 24 Components of voice alarm systems - Loudspeakers English version of DIN EN 54-24 2008-06《火灾检测和报警系统 第24部分 声音报警系统的组件.pdf》由会员分享，可在线阅读，更多相关《DIN EN 54-24-2008 Fire detection and fire alarm systems - Part 24 Components of voice alarm systems - Loudspeakers English version of DIN EN 54-24 2008-06《火灾检测和报警系统 第24部分 声音报警系统的组件.pdf（60页珍藏版）》请在麦多课文档分享上搜索。

1、June 2008DEUTSCHE NORM English price group 21No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.220.20!$PBA“1453130www

2、.din.deDDIN EN 54-24Fire detection and fire alarm systems Part 24: Components of voice alarm systems LoudspeakersEnglish version of DIN EN 54-24:2008-06Brandmeldeanlagen Teil 24: Komponenten fr Sprachalarmierungssysteme LautsprecherEnglische Fassung DIN EN 54-24:2008-06www.beuth.deDocument comprises

3、 60 pagesDIN EN 54-24:2008-06 2 Start of validity It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Bundesanzeiger (German Federal Law Gazette) and from the date given therein. National foreword This standa

4、rd has been prepared by Technical Committee CEN/TC 72 “Fire detection and fire alarm systems” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Feuerwehrwesen (Firefighting and Fire Protection Standards Committee), Technical Committee

5、 NA 031-02-01 AA Brandmelde- und Feueralarmanlagen. This standard specifies requirements, test methods and performance criteria for loudspeakers as a component of a voice alarm system for use in fire detection and alarm systems permanently installed in buildings (referred to in German as “BMS” and “

6、BMA” equipment) intended to broadcast a warning of fire between a fire detection and fire alarm system and the occupants of a building. The system requirements and technical application rules for fire detection and fire alarm systems complying with this standard are specified in national Standards D

7、IN 14675, DIN VDE 0833-2 (VDE 0833-2) and DIN VDE 0833-4 (VDE 0833-4). Certification of conformity of such products with the requirements specified in this standard is based on conformity evaluation of the products carried out by “Notified Bodies” in accordance with the EU Construction Products Dire

8、ctive (see Annex ZA of this standard) and the relevant provisions of the Bauproduktengesetz (BauPG) (Construction Products Act). National Annex NA (informative) Bibliography DIN 14675, Fire alarm systems Design and operation DIN VDE 0833-2 (VDE 0833-2), Alarm systems for fire, intrusion and hold up

9、Part 2: Requirements for fire alarm systems DIN VDE 0833-4 (VDE 0833-4), Alarm systems for fire, intrusion and hold up Part 4: Requirements for voice alarm systems in case of fire relating to construction products Bauproduktengesetz BauPG, Gesetz ber das Inverkehrbringen von und den freien Warenverk

10、ehr mit Bauprodukten zur Umsetzung der Richtlinie 89/106/EWG des Rates vom 21. Dezember 1988 zur Anglei-chung der Rechts- und Verwaltungsvorschriften der Mitgliedsstaaten ber Bauprodukte und andere Rechts-akte der Europischen Gemeinschaften (Construction Products Act German Law implementing Council

11、Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products) 89/106/EEC, Council Directive of 21 December 1988 on the approximation of the laws of the Member States This standard is valid from

12、 1 June 2008. EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 54-24April 2008ICS 13.310English VersionFire detection and fire alarm systems - Part 24: Components ofvoice alarm systems - LoudspeakersSystmes de dtection et dalarme incendie - Composants Brandmeldeanlagen - Teil 24: Komponenten frSpra

13、chalarmierungssysteme - LautsprecherThis European Standard was approved by CEN on 23 February 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to

14、-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder t

15、he responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungar

16、y, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue

17、de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 54-24:2008: Edes systmes dalarme vocale - Partie 24: Haut-parleursEN 54-24:2008 (E) 2 Contents Page Foreword4 Introduction .6 1 Scope 7 2 Normative

18、references 7 3 Terms, definitions and abbreviations8 3.1 Terms and definitions .8 3.2 Abbreviations.11 4 Requirements.11 4.1 Compliance.11 4.2 Frequency response limits .11 4.3 Durability 12 4.4 Construction.12 4.4.1 Provision for external conductors .12 4.4.2 Materials .12 4.4.3 Enclosure protectio

19、n.12 4.4.4 Access 12 4.5 Marking and data .12 4.5.1 Marking .12 4.5.2 Information in the product data sheet .13 5 Tests14 5.1 General14 5.1.1 Atmospheric conditions for tests 14 5.1.2 Operating conditions for tests .14 5.1.3 Mounting arrangements14 5.1.4 Tolerances 14 5.1.5 Frequency response measur

20、ement and sensitivity calculation .14 5.1.6 Frequency response measurement and sensitivity calculation for loudspeakers requiring dedicated system equalization.16 5.1.7 Provision for tests .16 5.1.8 Test schedule.16 5.2 Reproducibility.18 5.2.1 Object of the test18 5.2.2 Test procedure.18 5.2.3 Test

21、 requirements18 5.3 Rated impedance .18 5.3.1 Object of the test18 5.3.2 Test procedure.18 5.3.3 Test requirements19 5.4 Horizontal and vertical coverage angles.19 5.4.1 Object of the test19 5.4.2 Test procedure.19 5.4.3 Test requirement20 5.5 Maximum sound pressure level .20 5.5.1 Object of the tes

22、t20 5.5.2 Test procedure.20 5.5.3 Test requirements20 5.6 Rated noise power (durability) .21 5.6.1 Object of the test21 5.6.2 Test procedure.21 DIN EN 54-24:2008-06 EN 54-24:2008 (E) 3 5.6.3 Test requirement: 21 5.7 Dry heat (operational) .21 5.7.1 Object of the test .21 5.7.2 Test procedure.22 5.7.

23、3 Test requirements .22 5.8 Dry heat (endurance).22 5.8.1 Object of the test .22 5.8.2 Test procedure.23 5.8.3 Test requirements .23 5.9 Cold (operational)23 5.9.1 Object of the test .23 5.9.2 Test procedure.24 5.9.3 Test requirements .24 5.10 Damp heat, cyclic (operational) .25 5.10.1 Object of the

24、 test .25 5.10.2 Test procedure.25 5.10.3 Test requirements .25 5.11 Damp heat, steady state (endurance)26 5.11.1 Object of the test .26 5.11.2 Test procedure.26 5.11.3 Test requirements .26 5.12 Damp heat, cyclic (endurance) 27 5.12.1 Object of the test .27 5.12.2 Test procedure.27 5.12.3 Test requ

25、irements .27 5.13 Sulfur dioxide (SO2) corrosion (endurance) .28 5.13.1 Object of the test .28 5.13.2 Test procedure.28 5.13.3 Test requirements .28 5.14 Shock (operational) .29 5.14.1 Object of the test .29 5.14.2 Test procedure.29 5.14.3 Test requirements .29 5.15 Impact (operational) 30 5.15.1 Ob

26、ject of the test .30 5.15.2 Test procedure.30 5.15.3 Test requirements .30 5.16 Vibration, sinusoidal (operational) 31 5.16.1 Object of the test .31 5.16.2 Test procedure.31 5.16.3 Test requirements .32 5.17 Vibration, sinusoidal (endurance) .32 5.17.1 Object of the test .32 5.17.2 Test procedure.32

27、 5.17.3 Test requirements .33 5.18 Enclosure protection.33 5.18.1 Object of the tests .33 5.18.2 Enclosure of the loudspeaker 33 5.18.3 Test procedures.33 5.18.4 Test requirements .34 Annex A (normative) Acoustical measurements.35 Annex B (normative) Measuring rated noise power (durability)41 Annex

28、C (informative) Loudspeaker references.48 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive (89/106/EEC) 50 DIN EN 54-24:2008-06 EN 54-24:2008 (E) 4 Foreword This document (EN 54-24:2008) has been prepared by Technical Commit

29、tee CEN/TC 72 “Fire detection and fire alarm systems”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2008, and conflicting national standards sha

30、ll be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a m

31、andate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 54 Fire detection and fire alarm systems con

32、sists of the following parts: Part 1: Introduction Part 2: Control and indicating equipment Part 3: Fire alarm devices Sounders Part 4: Power supply equipment Part 5: Heat detectors Point detectors Part 7: Smoke detectors Point detectors using scattered light, transmitted light or ionization Part 10

33、: Flame detectors Point detectors Part 11: Manual call points Part 12: Smoke detectors Line detectors using an optical light beam Part 13: Compatibility assessment of system components Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance Part 15: Point detectors

34、 using a combination of detected phenomena Part 16: Voice alarm control and indicating equipment Part 17: Short-circuit isolators Part 18: Input/output devices Part 20: Aspirating smoke detectors Part 21: Alarm transmission and fault warning routine equipment DIN EN 54-24:2008-06 EN 54-24:2008 (E) 5

35、 Part 22: Resettable line-type heat detectors Part 23: Fire alarm devices Visual alarms Part 24: Components of voice alarm systems Loudspeakers Part 25: Components using radio links Part 26: Point fire detectors using carbon monoxide sensors1) Part 27: Duct smoke detectors1)According to the CEN/CENE

36、LEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxemb

37、ourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. 1) Under preparation. DIN EN 54-24:2008-06 EN 54-24:2008 (E) 6 Introduction The purpose of a voice alarm loudspeaker as a component of a voice alarm system is to provid

38、e intelligible warning to person(s) within, or in the vicinity of, a building in which a fire emergency has occurred and to enable such person(s) to take appropriate measures against a pre-determined evacuation plan. The primary reason for using a voice alarm system instead of the coded warnings giv

39、en by sounders is to reduce the time taken for those at risk to recognize that an emergency exists, and to give clear instructions on what to do next. This means that voice alarm loudspeakers need to achieve a minimum acoustical performance, as well as constructional and environmental requirements,

40、to be suitable for use in fire detection and fire alarm systems. This standard recognizes that the exact nature of the acoustical requirements for voice alarm loudspeakers will vary according to the nature of the space into which there are installed. It therefore specifies the minimum requirements t

41、hat apply to voice alarm loudspeakers and a common method for testing their operational performance against parameters specified by the manufacturers. This European Standard gives common requirements for the construction and robustness of voice alarm loudspeakers as well as their performance under c

42、limatic and mechanical conditions which are likely to occur in the service environment. As the types of loudspeaker considered in this European Standard are passive electromechanical devices not involving sensitive electronic circuits, electromagnetic compatibility (EMC) tests have not been included

43、. The loudspeakers have been classified in either an indoor or an outdoor application environment category. This European Standard requires that manufacturers specify certain characteristics in a consistent manner so that designers can make objective decisions about which loudspeaker to use in speci

44、fic applications. DIN EN 54-24:2008-06 EN 54-24:2008 (E) 7 1 Scope This European Standard specifies requirements, test methods and performance criteria for loudspeakers intended to broadcast a warning of fire between a fire detection and fire alarm system and the occupants of a building. This Europe

45、an Standard specifies loudspeakers for two types of application environment: type A, generally for indoor use and type B, generally for outdoor use. This European Standard does not cover loudspeakers for special applications, for example loudspeaker for use in hazardous applications, if such applica

46、tions require additional or other requirements or tests than those given in this European Standard. This European Standard is not intended to cover addressable loudspeakers, loudspeakers with active components. Voice alarm sounders are covered in EN 54-3:2001. 2 Normative references The following re

47、ferenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 54-1:1996, Fire detection and fire alarm systems Part 1: Intro

48、duction EN 54-3:2001, Fire detection and fire alarm systems Part 3: Fire alarm devices Sounders EN 60068-1:1994, Environmental testing Part 1: General and guidance (IEC 60068-1:1988 + Corrigendum 1988 + A1:1992) EN 60068-2-1:2007, Environmental testing Part 2-1: Tests Test A: Cold (IEC 60068-2-1:200

49、7) EN 60068-2-2:1993, Basic environmental testing procedures Part 2-2: Tests Tests B Dry heat (IEC 60068-2-2:1974 + IEC 60068-2-2 A:1976) EN 60068-2-2:1993/A1:1993, Basic environmental testing procedures Part 2-2: Tests Tests B Dry heat (IEC 60068-2-2:1974/A1:1993) EN 60068-2-2:1993/A2:1994, Basic environmental testing procedures Part 2-2: Tests Tests B Dry heat (IEC 60068-2-2:1974/A2:1994) EN 60068-2-6:1995, Environmental testing Part 2-6: Tests Test Fc: Vibrat