DIN EN 14829-2007 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW English version of DIN EN 14829 2007-11《不超过6kW的普通供热用独立式燃气无烟筒对流加热器》.pdf

《DIN EN 14829-2007 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW English version of DIN EN 14829 2007-11《不超过6kW的普通供热用独立式燃气无烟筒对流加热器》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 14829-2007 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW English version of DIN EN 14829 2007-11《不超过6kW的普通供热用独立式燃气无烟筒对流加热器》.pdf（83页珍藏版）》请在麦多课文档分享上搜索。

1、November 2007DEUTSCHE NORM English price group 23No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 97.100.20!$JI8“139382

2、1www.din.deDDIN EN 14829Independent gas-fired flueless space heaters for nominal heat input notexceeding 6 kWEnglish version of DIN EN 14829:2007-11Konvektions-Raumheizer ohne Abgasabfhrung fr gasfrmige Brennstoffe mit einerNennwrmebelastung kleiner oder gleich 6 kWEnglische Fassung DIN EN 14829:200

3、7-11www.beuth.deDocument comprises 83 pagesDIN EN 14829:2007-11 2 Start of validity This standard is due to be valid from 1 November 2007. National foreword This standard has been prepared by Technical Committee CEN/TC 62 “Independent gas-fired space heaters” (Secretariat: BSI, United Kingdom). The

4、responsible German body involved in its preparation was the Normenausschuss Heiz-, Koch- und Wrm-gert (Heating and Equipment Standards Committee). EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14829August 2007ICS 97.100.20English VersionIndependent gas-fired flueless space heaters for nominal he

5、atinput not exceeding 6 kWAppareils de chauffage domestiques non raccordsindpendants utilisant les combustibles gazeux pour undbit calorifique nominal infrieur ou gal 6 kWKonvektions-Raumheizer ohne Abgasabfhrung frgasfrmige Brennstoffe mit einer Nennwrmebelastungkleiner oder gleich 6 kWThis Europea

6、n Standard was approved by CEN on 24 June 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concernin

7、g such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own langu

8、age and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem

9、bourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights

10、of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14829:2007: EEN 14829:2007 (E) Contents Page Foreword. 7 1 Scope 8 2 Normative references . 8 3 Terms and definitions. 9 4 Classification. 15 4.1 Classification of gases . 15 4.2 Categories of applian

11、ces 15 4.2.1 General. 15 4.2.2 Category I. 16 4.2.3 Category II 16 5 Constructional requirements. 17 5.1 General. 17 5.1.1 Conversion to different gases . 17 5.1.2 Materials and method of construction 18 5.1.3 Accessibility for use and maintenance. 18 5.1.4 Connections 19 5.1.5 Soundness of the gas

12、circuit assembly .19 5.1.6 Electrical equipment. 20 5.1.7 Safety in the event of fluctuation, interruption and restoration of the auxiliary energy. 20 5.1.8 Appliance stability and fixing 20 5.1.9 Dress guards . 20 5.1.10 Confirmation of operation 20 5.2 Adjusting, control and safety devices 21 5.2.

13、1 General. 21 5.2.2 Injectors and gas rate adjusters 21 5.2.3 Aeration adjusters. 22 5.2.4 Shut-off valves 22 5.2.5 Flame supervision devices 23 5.2.6 Pressure regulators 23 5.2.7 Thermostats. 24 5.2.8 Atmosphere sensing device 24 5.3 Ignition devices . 24 5.3.1 General. 24 5.3.2 Ignition burners. 2

14、5 2EN 14829:2007 (E) 5.4 Flame supervision systems (Appliances with automatic burner systems only) . 25 5.5 Ignition burner or start-gas flame establishment 25 5.5.1 Appliances with non-automatic burner systems. 25 5.5.2 Appliances with automatic burner systems. 25 5.6 Main flame establishment 25 5.

15、6.1 General. 25 5.6.2 Appliances with non-automatic burner systems. 25 5.6.3 Appliances with automatic burner systems. 26 5.6.4 Direct establishment of the main flame 26 5.7 Burners 26 5.7.1 General. 26 5.7.2 Pan burners . 26 5.8 Fan to assist in the distribution of heat 26 5.9 Pressure test points

16、26 6 Operational requirements 27 6.1 General. 27 6.2 Soundness. 27 6.3 Heat inputs. 27 6.3.1 Nominal heat input 27 6.3.2 Reduced rate heat input . 27 6.4 Temperature of various parts of the appliance 27 6.4.1 Temperature of external parts of the appliance. 27 6.4.2 Temperature of components . 28 6.4

17、.3 Temperature of floor, shelf and walls . 28 6.5 Ignition and cross-lighting. 28 6.5.1 General. 28 6.5.2 Construction integrity test on glass fronted appliances 28 6.6 Flame stability . 28 6.7 Pressure regulators 28 6.8 Combustion . 29 6.8.1 Reference gas 29 6.8.2 Limit gas 29 6.8.3 Appliances fitt

18、ed with a fan to assist in the evacuation of the products of combustion 29 6.8.4 Normal and abnormal voltage fluctuation . 29 6.8.5 Measurement of nitrogen dioxide (NO2). 29 6.8.6 Values to be used in Annex G . 29 6.9 Sooting. 29 6.9.1 Cold condition . 29 3EN 14829:2007 (E) 6.9.2 Hot condition . 30

19、6.10 Atmosphere sensing device 30 6.11 Flame supervision devices 30 6.11.1 Thermoelectric device 30 6.11.2 Automatic burner control system . 30 7 Test methods. 30 7.1 General. 30 7.1.1 Characteristics of test gases: reference and limit gases . 30 7.1.2 Conditions for preparation of the test gases .

20、31 7.1.3 Practical application of test gases 31 7.1.4 Test pressures. 31 7.1.5 General test conditions 32 7.2 Appliance stability and fixing 33 7.3 Soundness of the gas circuit. 33 7.4 Heat inputs. 33 7.4.1 Nominal heat input 33 7.4.2 Reduced rate . 35 7.5 Temperature of various parts of the applian

21、ce 35 7.5.1 General. 35 7.5.2 Temperature of external parts of the appliance. 35 7.5.3 Temperature of components . 35 7.5.4 Temperature of floor, shelf and walls . 36 7.6 Ignition and cross-lighting. 36 7.6.1 General. 36 7.6.2 Ignition performance 37 7.6.3 Crosslighting . 37 7.6.4 Supplementary test

22、s. 38 7.7 Flame stability . 38 7.7.1 Lift. 38 7.7.2 Light back 38 7.7.3 Resistance to draught 38 7.8 Pressure regulators 39 7.8.1 Operational pressure regulator . 39 7.8.2 Pressure regulator out of service 39 7.9 Combustion . 39 7.9.1 General. 39 7.9.2 Combustion when tested in an atmosphere with ap

23、proximately normal level of oxygen 40 7.9.3 Normal and abnormal voltage fluctuation 42 4EN 14829:2007 (E) 7.9.4 Nitrogen dioxide (NO2) 43 7.10 Sooting. 44 7.10.1 General. 44 7.10.2 Determination of the smoke number 44 7.10.3 Test conditions 44 7.11 Atmosphere sensing devices 45 7.11.1 All appliances

24、 45 7.11.2 Blockage of combustion gases for closed fronted appliances . 45 7.12 Flame supervision device 45 7.12.1 Thermoelectric device 45 7.12.2 Automatic burner control systems . 46 8 Marking and instructions . 46 8.1 Data plate . 46 8.2 Other marking 47 8.2.1 General. 47 8.2.2 Warning labels. 47

25、 8.3 Marking of the packaging. 47 8.4 Utilization of symbols on the appliance and packaging. 48 8.4.1 Electrical supply 48 8.4.2 Type of gas 48 8.4.3 Gas supply pressure. 48 8.4.4 Country of destination 48 8.4.5 Category. 49 8.4.6 Other information 49 8.5 Instructions 49 8.5.1 General. 49 8.5.2 Inst

26、ructions for use, and user maintenance 49 8.5.3 Technical instructions for installation and maintenance . 50 8.5.4 Additional information 51 Figure 3 Example of combustion products collecting device 54 Annex A (informative) National situations . 55 A.1 General. 55 A.2 Marketing in different countrie

27、s of the categories listed in the text of the standard 55 A.3 Supply pressures for the appliances corresponding to the categories given in A.2 57 A.4 Special categories marketed nationally or locally. 59 A.4.1 General. 59 A.4.2 Definition of special categories. 60 A.4.3 Gas rate adjusters, aeration

28、adjusters and regulators . 62 A.4.4 Conversion to different gases . 62 A.5 Test gases corresponding to the special categories given in A.4. 62 A.6 Gas connections in the various countries . 65 Annex B (informative) Gas valve arrangements for automatic controls for automatic control 66 5EN 14829:2007

29、 (E) Annex C (informative) Means of identification of the types of gas in use in the various countries 67 Annex D (normative) Apparatus for the determination of the smoke number. 68 D.1 Pump 68 D.2 Sampling tube . 68 D.3 Filter paper. 68 D.4 Grey scale 68 Annex E (normative) Dress guards 70 E.1 Scop

30、e 70 E.2 Requirements 70 E.2.1 Access 70 E.2.2 Strength . 70 E.3 Tests. 70 E.3.1 Access 70 E.3.2 Strength . 71 Annex F (normative) Vitiation room . 73 F.1 Dimensions 73 F.2 Sealing requirement 73 F.3 Construction 73 Annex G (normative) Room size and ventilation 75 G.1 General. 75 G.2 Room size 75 G.

31、2.1 General. 75 G.2.2 Maximum allowable gas input with regard to CO emissions . 76 G.2.3 Maximum allowable gas input with regard to NO2emissions 76 G.2.4 Calculation of minimum room size . 77 G.2.5 Ventilation 77 Annex H (informative) A-deviation. 78 Annex ZA (informative) Relationship between this

32、European Standard and the Essential Requirements of EU Directive 90/396/EEC. 79 Bibliography . 81 6EN 14829:2007 (E) Foreword This document (EN 14829:2007) has been prepared by Technical Committee CEN/TC 62 “Independent gas-fired space heaters”, the secretariat of which is held by BSI. This European

33、 Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2008, and conflicting national standards shall be withdrawn at the latest by February 2008. This document has been prepared under a mandate given to CEN

34、 by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national st

35、andards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

36、 Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 7EN 14829:2007 (E) 1 Scope This document specifies, for the purpose of type examination, the requirements and test methods for construction, safety, marking and rational use of energy of 2ndand 3rdfamily gas-fired

37、 domestic flueless space heating appliances having a nominal input not exceeding 6 kW (based on net calorific value). It covers the following Type AASfixed flueless heaters: NOTE These are type A appliances fitted with an atmosphere sensing device, with or without a fan. a) heaters with or without a

38、 catalytic converter; b) Category 1 appliances burning gases of the second family; c) Category 2 appliances burning gases of the second and third families. It does not cover i. Mobile heaters. ii. Category 1 appliances burning gases of the third family. iii. Portable flueless heaters. iv. Diffusive

39、catalytic combustion heaters. There are no specific thermal efficiency requirements appropriate to these types of appliance as: All the heat produced by the combustion process is released into the space to be heated. The requirements with regard to the combustion performance, which is a safety matte

40、r, ensure the effective burning of the fuel gas. This standard is only applicable to appliances which are to be type tested. Matters related to quality assurance systems, tests during production and to certificates of conformity of auxiliary devices are not dealt with by this standard. 2 Normative r

41、eferences The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 88-1, Pressure regulators and associ

42、ated safety devices for gas appliances Part 1: Pressure regulators for inlet pressures up to and including 500 mbar EN 125, Flame supervision devices for gas burning appliances Thermoelectric flame supervision devices EN 126, Multifunctional controls for gas burning appliances EN 161, Automatic shut

43、-off valves for gas burners and gas appliances EN 257, Mechanical thermostats for gas-burning appliances 8EN 14829:2007 (E) EN 298, Automatic gas burner control systems for gas burners and gas burning appliances with or without fans EN 437:2003, Test gases - Test pressures - Appliance categories EN

44、751-1, Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds EN 751-2, Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointi

45、ng compounds EN 1057:2006, Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications CR 1404, Determination of emissions from appliances burning gaseous fuels during type-testing EN 60068-2-75, Environmental testing - Part 2: Tests - Test Eh: Hamm

46、er tests (IEC 60068-2-75:1997) EN 60335-1:2002, Household and similar electrical appliances Safety - Part 1: General requirements (IEC 60335- 1:2001, modified) EN 60335-2-102, Household and similar electrical appliances Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning a

47、ppliances having electrical connections (IEC 60335-2-102:2004, modified) EN 60529, Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989) EN 60730-2-9, Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls (I

48、EC 60730-2-9:2000, modified) EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) EN ISO 3166-1, Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO

49、3166-1:2006) ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 working surfaces parts of an appliance, which, due to the nature of the appliance, have temperatures exceeding the limits specified in 6.4.1 excluding parts that are likely to be touched during operations carried out in the normal use of the appliance, for example, the area adjacent to control knobs Workin