CEPT T CS 68-01 E-1986 Introduction Field of Application and Basic Functions for Digital Transit Exchanges《数字转接交换引入、应用领域和基本功能》.pdf
《CEPT T CS 68-01 E-1986 Introduction Field of Application and Basic Functions for Digital Transit Exchanges《数字转接交换引入、应用领域和基本功能》.pdf》由会员分享,可在线阅读,更多相关《CEPT T CS 68-01 E-1986 Introduction Field of Application and Basic Functions for Digital Transit Exchanges《数字转接交换引入、应用领域和基本功能》.pdf(3页珍藏版)》请在麦多课文档分享上搜索。
1、CEPT T/CS*b-OI*E 232b4I4 0005263 I 0 TCS68-01 Page E 1 Recommendation T/CS 68-01 (Brussels 1980, modified inVienna 1982, Montpellier 1984 and Odense 1986) INTRODUCTION, FIELD OF APPLICATION AND BASIC FUNCTIONS FOR DIGITAL TRANSIT EXCHANGES Recommendation proposed by Working Group T/WG 11 “Switching
2、and Signalling” (CS) “The European Conference of Postal and Telecommunications Administrations, considering that - transit exchanges are currently being introduced for both analogue and digital telephone networks, - the evolution of telecommunication networks toward an integrated services digital ne
3、twork (ISDN) is expected in many countries, the study of requirements for digital transit switching will take into account developments of the ISDN and results will be reflected in the Recommendations, recommends that the members of the CEPT, when introducing digital transit exchanges, take account
4、of and give effect to the following set of switching systems specifications.” Notes. CCITT Recommendations take into account most of those ideas developed in the preceding CEPT Recommendations and the final versions established in CCITT are supported by CEPT member Administrations. - It is helpful f
5、or writers and readers of Recommendations on digital transit exchanges to have the information presented in a uniform way in the two sets of Recommendations to facilitate concentration on specific issues from the CEPT point of view and progress in areas not covered so far by CCITT; in order to limit
6、 as much as possible the redundancy, however, the present text has been reorganized with the aim of emphasizing the differences with respect to CCITT Recommendations. The reader is referred to CCITT Recommendation Q.501 l, to which this Recommendation is identical, except for the additions and modif
7、ications indicated below. The section references (indicated 0) are to Q.501 i. 0 1; the CEPT series of Recommendations is: T/CS 68-01 2 instead of Q.501 i T/CS 68-02 4 instead of 4.502 3 T/CS 68-03 6 instead of 4.503 5 T/CS 68-04 SI instead of 4.504 7 T/CS 68-06 lo instead of 4.506 9. Note. CCITT Re
8、commendations Q.505 li and 4.507 12 are not considered. $3; Add at the beginning: The fundamental purpose of a digital transit exchange is circuit switching. The functions which may be required to fulfil this purpose are described in this Recommendation. There is no intent to describe hardware, soft
9、ware of firmware implementations, and no constraint on the design of the functions, either individually or collectively, is implied. In integrated services digital networks, some packet handling facilities and/or information processing functions might also be provided in the digital transit exchange
10、. The general objectives of the exchange are: - to set up and clear down connections controlled by signalling systems or control-initiated by man-machine - to perform as specified in Recommendations T/CS 68-02 4, T/CS 68-03 6, T/CS 68-04 8 and T/CS 68-06 lo; - to work in harmony as a network element
11、 with other exchanges conforming to the T/CS 68 Group of Recommen- dations, with digital local and combined exchanges (see T/CS 62 Group of Recommendations: T/CS 62-01 13, 62-02 14, 62-03 15, 62-04 16, 62-06 17) and with existing analogue exchanges; communications ; I Edition of September 15, 1986 t
12、 CEPT T/CS*b-OL*E m 232bYLY 00052bY 3 m rm 68-01 E Page 2 - to provide at least a specified minimum of operation, maintenance and diagnostic information as required for - to be a component in the IDN and to put minimal constraint on the development of the ISDN; - to act as a node in the timing/synch
13、ronisation system; - to work with the recommended CCITT, CEPT and other signalling system(s) as required because of its position Certain other objectives may be optional: - to control ancillary equipment; - to provide additional operation, maintenance and diagnostic information for eficient operatio
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- CEPTTCS6801E1986INTRODUCTIONFIELDOFAPPLICATIONANDBASICFUNCTIONSFORDIGITALTRANSITEXCHANGES 数字 转接 交换 引入

链接地址:http://www.mydoc123.com/p-593079.html