BS ISO IEC 29109-7-2011 Information technology Conformance testing methodology for biometric data interchange formats defined in ISO IEC 19794 Signature sign time series data《信息技术 .pdf

《BS ISO IEC 29109-7-2011 Information technology Conformance testing methodology for biometric data interchange formats defined in ISO IEC 19794 Signature sign time series data《信息技术 .pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 29109-7-2011 Information technology Conformance testing methodology for biometric data interchange formats defined in ISO IEC 19794 Signature sign time series data《信息技术 .pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationInformation technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 7: Signature/sign time series dataBS ISO/IEC 29109-7:2

2、011National forewordThis British Standard is the UK implementation of ISO/IEC 29109-7:2011.The UK participation in its preparation was entrusted to Technical CommitteeIST/44, Biometrics.A list of organizations represented on this committee can be obtained on request to its secretary.This publication

3、 does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 68467 8 ICS 35.040Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authorit

4、y of the Standards Policy and Strategy Committee on 31 October 2011.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS ISO/IEC 29109-7:2011Reference numberISO/IEC 29109-7:2011(E)ISO/IEC 2011INTERNATIONAL STANDARD ISO/IEC29109-7First edition2011-10-01Information technolo

5、gy Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 7: Signature/sign time series data Technologies de linformation Mthodologie dessai de conformit pour les formats dinterchange de donnes biomtriques dfinis dans lISO/CEI 19794 Partie 7: Donnes de s

6、rie chronologique de signature/signe BS ISO/IEC 29109-7:2011ISO/IEC 29109-7:2011(E) COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including ph

7、otocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in S

8、witzerland ii ISO/IEC 2011 All rights reservedBS ISO/IEC 29109-7:2011ISO/IEC 29109-7:2011(E) ISO/IEC 2011 All rights reserved iiiContents Page Foreword iv Introduction . v 1 Scope 1 2 Conformance . 1 3 Normative references 2 4 Terms and definitions . 2 5 Symbols and abbreviated terms 2 6 Conformance

9、 testing methodology . 2 6.1 General . 2 6.2 Table of requirements in the base standard . 2 6.3 Table of Test Assertions Full Format . 10 6.4 Table of Test Assertions Compact Format 21 BS ISO/IEC 29109-7:2011ISO/IEC 29109-7:2011(E) iv ISO/IEC 2011 All rights reservedForeword ISO (the International O

10、rganization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the

11、 respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of inf

12、ormation technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft Internat

13、ional Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document m

14、ay be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 29109-7 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 37, Biometrics. ISO/IEC 29109 consists of the following parts,

15、 under the general title Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794: Part 1: Generalized conformance testing methodology Part 2: Finger minutiae data Part 3: Finger pattern spectral data Part 4: Finger image data Part 5: Fac

16、e image data Part 6: Iris image data Part 7: Signature/sign time series data Part 8: Finger pattern skeletal data Part 9: Vascular image data Part 10: Hand geometry silhouette data Part 11: Signature/sign processed dynamic data Part 13: Voice data Part 14: DNA data BS ISO/IEC 29109-7:2011ISO/IEC 291

17、09-7:2011(E) ISO/IEC 2011 All rights reserved vIntroduction ISO/IEC 19794-7 specifies two data interchange formats for storing, recording, and transmitting signature/sign time series data records. This part of ISO/IEC 29109 establishes tests for checking the correctness of the binary records. Withou

18、t standardized methods for conducting conformance tests of commercial products that claim to support ISO/IEC 19794-7, application developers and implementers of Biometric Service Providers can interpret the ISO/IEC 19794-7 specification differently and this can compromise interoperability. This poss

19、ibility rests on the assertion that conformance to ISO/IEC 19794-7 is a necessary prerequisite for achieving interoperability among implementations. This is the motivation for development of this conformance testing methodology. This part of ISO/IEC 29109 supports those applications that require use

20、 of signature/sign time series data according to ISO/IEC 19794-7. It defines a testing methodology to assure conformance of a vendors application or service to the base ISO/IEC 19794-7 specification. Thus this document is intended to establish elements of the conformance testing methodology framewor

21、k that are specific to the signature/ sign time series-based data record requirements of ISO/IEC 19794-7, define requirements and guidelines for specifying conformance test suites and related test methods for measuring conformity of products and services to the signature/sign time series-based data

22、record requirements of ISO/IEC 19794-7, and define test procedures to be followed before, during, and after conformance testing. This part of ISO/IEC 29109 is applicable to the development and use of conformity test method specifications, conformity test suites for ISO/IEC 19794-7 records, and confo

23、rmance testing programs for ISO/IEC 19794-7 conformant products. It is intended primarily for use by testing organizations, but can be applied by developers and users of test method specifications and test method implementations. The tables of test assertions in Clause 6 specify levels of testing fo

24、r the conformance requirements of ISO/IEC 19794-7. BS ISO/IEC 29109-7:2011BS ISO/IEC 29109-7:2011INTERNATIONAL STANDARD ISO/IEC 29109-7:2011(E) ISO/IEC 2011 All rights reserved 1Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Par

25、t 7: Signature/sign time series data 1 Scope This part of ISO/IEC 29109 specifies elements of conformance testing methodology, test assertions, and test procedures as applicable to ISO/IEC 19794-7. ISO/IEC 19794-7 defines two data interchange formats for signature/sign time series data, one for gene

26、ral use and one compact format for use with smart cards and other tokens. This part of ISO/IEC 29109 establishes test assertions of the structure of both signature/sign time series data formats as specified in ISO/IEC 19794-7 (Type A Level 1 as defined in ISO/IEC 29109-1), test assertions of interna

27、l consistency by checking the types of values that may be contained within each field (Type A Level 2 as defined in ISO/IEC 29109-1), and test assertions on the contents of data records in the signature/sign time series data formats as specified in ISO/IEC 19794-7 (Type A Level 3 as defined in ISO/I

28、EC 29109-1). This part of ISO/IEC 29109 does not establish tests of other characteristics of biometric products or other types of testing of biometric products (e.g. acceptance, performance, robustness, security), and tests of conformance of systems that do not produce ISO/IEC 19794-7 records. 2 Con

29、formance Biometric data interchange format conformance tests conform to this part of ISO/IEC 29109 if they satisfy all of the normative requirements related to Clause 6. Specifically, they shall use the test methodology specified in Clauses 6, 7 and 8 of ISO/IEC 29109-1:2009, and all tests shall use

30、 the assertions defined in Table 2 to Table 4. Implementations of ISO/IEC 19794-7 tested according to the methodology specified shall be able to claim conformance only to those requirements specified in ISO/IEC 19794-7 that are tested by the test methods established by this methodology. Implementati

31、ons of ISO/IEC 19794-7 do not necessarily need to conform to all possible aspects of ISO/IEC 19794-7, but only to those ISO/IEC 19794-7 requirements that are claimed to be supported by the implementation in an Implementation Conformance Statement, filled out in accordance with Clause 8 of ISO/IEC 29

32、109-1:2009 and Table 1 of this part of ISO/IEC 29109. BS ISO/IEC 29109-7:2011ISO/IEC 29109-7:2011(E) 2 ISO/IEC 2011 All rights reserved3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applie

33、s. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 19794-7:2007, Information technology Biometric data interchange formats Part 7: Signature/sign time series data ISO/IEC 29109-1:2009, Information technology Conformance testing method

34、ology for biometric data interchange formats defined in ISO/IEC 19794 Part 1: Generalized conformance testing methodology 4 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 19794-7 and ISO/IEC 29109-1 apply. 5 Symbols and abbreviated terms For the p

35、urposes of this document, the symbols and abbreviated terms given in ISO/IEC 19794-7 and ISO/IEC 29109-1 apply. 6 Conformance testing methodology 6.1 General The testing methodology specified in Clauses 6, 7 and 8 of ISO/IEC 29109-1:2009 shall apply. The content of the tables below is based on the c

36、onformance testing methodology outlined in ISO/IEC 29109-1 and shall only be used in the context of that testing methodology. 6.2 Table of requirements in the base standard The normative requirements of ISO/IEC 19794-7:2007 signature/sign time series data formats are listed in Table 1. Under subform

37、at applicability the columns labelled F and C indicate the Full and Compact Formats. The supplier of the IUT can explain which optional components of the standard are supported and the testing laboratory can note the results of the test. Table 1 Requirements of the base standard, ISO/IEC 19794-7:200

38、7 Require-ment ID Reference in Base Standard Requirement Summary Level StatusSubformat Applicability IUT Support Supported Range Test Result F C R-1 5.1 The coordinate system used to express the pen position shall be a three-dimensional Cartesian coordinate system. 3B M Y Y R-2 5.1 The x-axis shall

39、be the horizontal axis of the writing plane, with x coordinates increasing to the right. 3B M Y Y R-3 5.1 The y-axis shall be the vertical axis of the writing plane, with y coordinates increasing upwards. 3B M Y Y BS ISO/IEC 29109-7:2011ISO/IEC 29109-7:2011(E) ISO/IEC 2011 All rights reserved 3Table

40、 1 (continued) Require-ment ID Reference in Base Standard Requirement Summary Level StatusSubformat Applicability IUT Support Supported Range Test Result F C R-4 5.1 The z-axis shall be the axis perpendicular to the writing plane, with z coordinates increasing upwards out of the writing plane starti

41、ng from 0. 3C O Y Y R-5 5.2 The more significant octets of any multioctet quantity are stored at lower addresses in memory than (and are transmitted before) less significant octets. 1 M Y Y R-6 7.2 The organisation of the BDB shall be as follows: 2 M Y N R-7 1. mandatory variable-length BDB header c

42、ontaining information about the overall BDB, 2 M Y N R-8 2. mandatory variable-length BDB body. 2 M Y N R-9 7.3.1 The BDB header shall contain infor-mation about the overall signature/ sign time series data block. 2 M Y N R-10 7.3.2 The signature/sign time series data block shall begin with the thre

43、e ASCII characters “SDI” to identify the data block as following the full format defined in ISO/IEC 19794-7:2007, followed by a zero octet as a string terminator (5344 4900Hex). 1 M Y N R-11 7.3.3 The version number for the version of ISO/IEC 19794-7:2007 used in constructing the signature/sign time

44、 series data block shall be placed in four octets. This version number shall consist of three ASCII characters followed by a zero octet as a string terminator. The first and second character shall represent the major revision number and the third character will represent the minor revision number. T

45、he version number shall be “10” (203130Hex, an ASCII space followed by an ASCII 1 and an ASCII 0). 1 M Y N R-12 7.3.4.1 The channel descriptions field shall begin with a channel inclusion field indicating the presence or absence of channels. The channel inclusion field shall consist of 2 octets. Eac

46、h bit shall correspond to a channel as shown in Table 4 of ISO/IEC 19794-7:2007. A bit value of 1 shall encode the presence of the corresponding channel; a bit value of 0 shall encode the absence of the corresponding channel. 1 M Y N BS ISO/IEC 29109-7:2011ISO/IEC 29109-7:2011(E) 4 ISO/IEC 2011 All

47、rights reservedTable 1 (continued) Require-ment ID Reference in Base Standard Requirement Summary Level StatusSubformat Applicability IUT Support Supported Range Test Result F C R-13 7.3.4.2 The channel inclusion field shall be followed by a sequence of channel descriptions for the channels indicate

48、d as present in the channel inclusion field. The order of the channel descriptions is determined by the order of indicated inclusion within the channel inclusion field (Table 4 of ISO/IEC 19794-7:2007) starting with the X channel. The channel descriptions are mandatory for all channels present in th

49、e signature/sign time series data block. 2 M Y N R-14 7.3.4.2 Each channel description shall begin with a preamble. Each channel description preamble shall consist of 1 octet. Each of the bits 4 through 8 of a channel description preamble shall correspond to a channel attribute as shown in Table 5 of ISO/IEC 19794-7:2007. A bit value of 1 shall encode the presence of the corresponding channel attribute; a bit