BS ISO 7130-2013 Earth-moving machinery Operator training Content and methods《土方机械 操作者培训 内容和方法》.pdf
《BS ISO 7130-2013 Earth-moving machinery Operator training Content and methods《土方机械 操作者培训 内容和方法》.pdf》由会员分享,可在线阅读,更多相关《BS ISO 7130-2013 Earth-moving machinery Operator training Content and methods《土方机械 操作者培训 内容和方法》.pdf(14页珍藏版)》请在麦多课文档分享上搜索。
1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS ISO 7130:2013Earth-moving machinery Operator training Contentand methodsBS ISO 7130:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO
2、 7130:2013. Itsupersedes BS 6264:1982 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/513/1, Earth moving machinery (International).A list of organizations represented on this committee can beobtained on request to its secretary.This publication does
3、not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 73845 6ICS 03.100.30; 53.100Compliance with a British Standard cannot confer immunity froml
4、egal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2013.Amendments issued since publicationDate T e x t a f f e c t e dBS ISO 7130:2013 ISO 2013Earth-moving machinery Operator training Content and methodsEngins de terras
5、sement Formation du conducteur Contenu et mthodesINTERNATIONAL STANDARDISO7130Second edition2013-04-15Reference numberISO 7130:2013(E)BS ISO 7130:2013ISO 7130:2013(E)ii ISO 2013 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2013All rights reserved. Unless otherwise specified, no part of this p
6、ublication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the c
7、ountry of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandBS ISO 7130:2013ISO 7130:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federa
8、tion of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committ
9、ee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance
10、with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires appr
11、oval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 7130 was prepared by Technical Committee
12、 ISO/TC 127, Earth-moving machinery, Subcommittee SC 3, Machine characteristics, electrical and electronic systems, operation and maintenance.This second edition cancels and replaces the first edition (ISO 7130:1981), which has been technically revised. ISO 2013 All rights reserved iiiBS ISO 7130:20
13、13BS ISO 7130:2013Earth-moving machinery Operator training Content and methods1 ScopeThis International Standard provides a basis for content and methods used for operator training for earth-moving machinery as defined in ISO 6165. The training in turn provides the basis for developing operators of
14、earth-moving machinery who are knowledgeable and understand the manufacturers instructions for safe and proper operation and routine maintenance. It establishes criteria for evaluating the competency of a person who operates and could perform routine maintenance of earth-moving machinery, but does n
15、ot specify any procedure for proficiency testing or assessment of the operators competence of operating and maintaining earth-moving machinery. It is not intended to substitute for national or regional requirements or regulations related to operator training.2 Normative referencesThe following docum
16、ents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 6165, Earth-moving mach
17、inery Basic types Identification and terms and definitionsISO 6405-1, Earth-moving machinery Symbols for operator controls and other displays Part 1: Common symbolsISO 6405-2, Earth-moving machinery Symbols for operator controls and other displays Part 2: Specific symbols for machines, equipment and
18、 accessoriesISO 9244, Earth-moving machinery Machine safety labels General principles3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 6165 and the following apply.3.1operatorperson who operates and could perform routine maintenance of earth-moving mach
19、ineryNote 1 to entry: “Routine” includes items as defined by the manufacturer, e.g. tyre pressure, fluid levels.3.2simulatorsystem that imitates the experience of operating an earth-moving machine3.3traineeperson receiving training3.4trainerperson qualified to instruct a trainee to properly operate
20、and perform routine maintenance of earth-moving machineryINTERNATIONAL STANDARD ISO 7130:2013(E) ISO 2013 All rights reserved 1BS ISO 7130:2013ISO 7130:2013(E)3.5trainingprocess of acquiring knowledge and developing skills and competency to operate and perform routine maintenance of earth-moving mac
21、hinery3.6work siteplace where earth-moving machines are operated or where routine maintenance is performed4 Requirements4.1 GeneralThe purpose of operator training is to impart to the trainee the knowledge and skills necessary for proper operation and routine maintenance of earth-moving machinery ac
22、cording to the manufacturers instructions. If an operator is required to be qualified, the training also needs to be made for the purpose of covering qualification.The content and duration of operator training will depend upon the machine family, application, and complexity of the individual machine
23、 and its attachment, if applicable, and the initial level of trainee knowledge, skills, and experience.NOTE Refresher training courses provide updates for an operator to learn about technical advancement and innovation applicable to the machine or may be necessary to comply with other national or re
24、gional requirements.4.2 CriteriaThe following is based on the information and instructions provided by the manufacturer in the operators manual according to ISO 67501).A trained operator shall: understand and apply proper safety precautions when operating or performing routine maintenance; understan
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSISO71302013EARTHMOVINGMACHINERYOPERATORTRAININGCONTENTANDMETHODS 土方 机械 操作者 培训 内容 方法 PDF

链接地址:http://www.mydoc123.com/p-587919.html