BS ISO 3292-2016 Extra-long parallel shank twist drills《带超长直柄的麻花钻》.pdf

《BS ISO 3292-2016 Extra-long parallel shank twist drills《带超长直柄的麻花钻》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 3292-2016 Extra-long parallel shank twist drills《带超长直柄的麻花钻》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BS ISO 3292:2016Extra-long parallel shank twistdrillsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS ISO 3292:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 3292:2016.The UK participation in its preparation was entruste

2、d to TechnicalCommittee MTE/18, Tools tips and inserts for cutting applications.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its corre

3、ctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 83631 2ICS 25.100.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy

4、Committee on 31 October 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO 3292:2016 ISO 2016Extra-long parallel shank twist drillsForets extra-longs queue cylindriqueINTERNATIONAL STANDARDISO3292Third edition2016-10-15Reference numberISO 3292:2016(E)BS ISO 3292:20

5、16ISO 3292:2016(E)ii ISO 2016 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photoc

6、opying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749

7、01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 3292:2016ISO 3292:2016(E)Foreword iv1 Scope . 12 Normative references 13 Dimensions . 14 Technical specifications 15 Designation 1Annex A (informative) Relationship between designations in this International Standard and ISO 13399 (all parts

8、) 3Bibliography 4 ISO 2016 All rights reserved iiiContents PageBS ISO 3292:2016ISO 3292:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carrie

9、d out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS

10、O collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different

11、approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be t

12、he subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).An

13、y trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organiz

14、ation (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 29, Small tools, Subcommittee SC 2, Holding tools, adaptive items and interfaces.This third edition cancels and replaces the seco

15、nd edition (ISO 3292:1995), of which it constitutes a minor revision, notably with the addition of Annex A, which gives the relationship between the designations of this International Standard and the ISO 13399 series.iv ISO 2016 All rights reservedBS ISO 3292:2016INTERNATIONAL STANDARD ISO 3292:201

16、6(E)Extra-long parallel shank twist drills1 ScopeThis International Standard specifies the dimensions of extra-long parallel shank twist drills in the range of 2 mm to 14 mm diameter with an overall length range of 125 mm to 400 mm.2 Normative referencesThe following documents, in whole or in part,

17、are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 10899, High-speed steel two-flute twist drills Tec

18、hnical specifications3 DimensionsSee Figure 1 and Table 1.4 Technical specificationsUnless otherwise specified, technical requirements shall comply with ISO 10899.5 DesignationExtra-long parallel shank twist drills in accordance with this International Standard shall be designated by the following:a

19、) “twist drill”;b) a reference to this International Standard, i.e. ISO 3292;c) drill diameter, d, in millimetres;d) overall length, l, in millimetres.EXAMPLE An extra-long parallel shank twist drill of diameter d = 10 mm and overall length l = 250 mm is designated as follows:Twist drill ISO 3292 -

20、10 - 250Figure 1 Extra-long parallel shank twist drills ISO 2016 All rights reserved 1BS ISO 3292:2016ISO 3292:2016(E)Table 1 Extra-long parallel shank twist drills Preferred sizesDimensions in millimetresPreferred diameters dh8Overall lengthl125 160 200 250 315 400Flute lengthl180 100 150 200 250 3

21、002 X X2,5 X X3 X X3,5 X X X4 X X X X4,5 X X X X5 X X X X5,5 X X X X6 X X X X6,5 X X X X7 X X X X7, 5 X X X X8 X X X8,5 X X X9 X X X9,5 X X X10 X X X10,5 X X X11 X X X11,5 X X X12 X X X12,5 X X X13 X X X13,5 X X X14 X X XRange of diameters2 d 2,5 2 d 4,75 2,65 d 7,5 3,35 d 14 3,75 d 14 4,75 d 142 IS

22、O 2016 All rights reservedBS ISO 3292:2016ISO 3292:2016(E)Annex A (informative) Relationship between designations in this International Standard and ISO 13399 (all parts)For relationship between designations in this International Standard and preferred symbols according to ISO 13399 (all parts), see

23、 Table A.1.Table A.1 Relationship between designations in this International Standard and ISO 13399 (all parts)Symbol in ISO 3292Reference in ISO 3292Property name in ISO 13399 (all parts)Symbol in ISO 13399 (all parts)Reference in ISO 13399 (all parts)dFigure 1 Table 1cutting diameter DC 71D084653E

24、57Fl1Figure 1 Table 1length chip flute LCF 71DCCC27DEF53lFigure 1 Table 1overall length OAL 71D078EB7C086 ISO 2016 All rights reserved 3BS ISO 3292:2016ISO 3292:2016(E)Bibliography1 ISO 235, Parallel shank jobber and stub series drills and Morse taper shank drills2 ISO 494, Cylindrical shank twist d

25、rills Long series3 ISO 13399 (all parts), Cutting tool data representation and exchange4 ISO 2016 All rights reservedBS ISO 3292:2016BS ISO 3292:2016ISO 3292:2016(E) ISO 2016 All rights reservedICS 25.100.30Price based on 4 pagesThis page deliberately left blankBSI is the national body responsible f

26、or preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, i

27、ndustry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all s

28、izes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge

29、 Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Org

30、anizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the internatio

31、nal standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly

32、 display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. Th

33、e standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchas

34、ed in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can

35、save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further

36、information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with sta

37、ndards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your s

38、tandards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. W

39、ith updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your

40、 business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20