BS EN ISP 15124-1-1999 Information technology - International standardized profile FOD126 - Open document format image applications - Enhanced document structure - Character raster.pdf

《BS EN ISP 15124-1-1999 Information technology - International standardized profile FOD126 - Open document format image applications - Enhanced document structure - Character raster.pdf》由会员分享，可在线阅读，更多相关《BS EN ISP 15124-1-1999 Information technology - International standardized profile FOD126 - Open document format image applications - Enhanced document structure - Character raster.pdf（56页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ENISP 15124-1:1999 Information technology International Standardized Profile FOD126 OpenDocument Format: Image Applications Enhanced document structure Character,raster graphics, and geometric graphics content architecture Part1: Document Application Profile (DAP) The European St

2、andard EN ISP15124-1:1998 has the status of a BritishStandard ICS 35.100.05BSENISP15124-1:1999 This BritishStandard, having been prepared under the directionof the DISC Board, waspublished under the authorityof the Standards Committee and comes into effect on 15July1999 BSI04-2000 ISBN 0 580 32736 1

3、 National foreword This BritishStandard is the English language version of EN ISP15124-1:1998. It is identical with ISO/IEC ISP15124-1:1998. The UK participation in its preparation was entrusted to Technical Committee IST/18, Document processing and related communications, which has the responsibili

4、ty to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of

5、organizations represented on this committee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publicati

6、ons. The BritishStandards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard

7、does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an i

8、nside front cover, pagesi andii, theEN ISP title page, page2, the ISO/IEC ISP title page, pagesii tovi, pages1to42, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on th

9、e inside front cover. Amendments issued since publication Amd. No. Date CommentsBSENISP15124-1:1999 BSI 04-2000 i Contents Page National foreword Inside front cover Foreword 2 Foreword v Text of ISO/IEC ISP 15124-1 1ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISP15124-1 June1998 ICS

10、 35.240.20 Descriptors: SeeISO document English version Information technology International Standardized Profile FOD126 Open Document Format: Image Applications Enhanced document structure Character, raster graphics, and geometric graphics content architecture Part1: Document Application Profile (D

11、AP) (ISO/IEC ISP15124-1:1996) Technologies de Iinformation Profil normalis international FOD126 Format de document ouvert: Applications dimage Structure de document amliore Architecture du contenu des caractres, des graphiques raster et des graphiques gomtriques Partie1: Profil dapplication de docum

12、ent (ISO/IEC ISP15124-1:1996) This European Standard was approved by CEN on21May1998. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists

13、and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsi

14、bility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherl

15、ands. Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1998 CEN All rights of exploitation in any form and by any means res

16、erved worldwide for CEN national Members. Ref. No. EN ISP15124-1:1998 EENISP15124-1:1998 BSI 04-2000 2 Foreword The text of the International Standard from Technical Committee ISO/IEC/JTC1 “Information technology” of the International Organization for Standardization (ISO) and the International Elec

17、trotechnical Commission (IEC) has been taken over as an European Standard by the Technical Board of CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December1998, and conflicting national stan

18、dards shall be withdrawn at the latest by December1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Icelan

19、d, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the UnitedKingdom. Endorsement notice The text of the International Standard ISO/IEC ISP15124-1:1996 has been approved by CEN as a European Standard without any modification.ENISP15124-1:1998 ii BSI 04-2000

20、Contents Page Foreword v Introduction 1 1 Scope 1 2 Normative references 2 2.1 Identical Recommendations|International Standards 2 2.2 Paired Recommendations|International Standards equivalent in technical content 2 2.3 Additional references 3 3 Definitions and terminology 3 3.1 Definitions 3 3.2 Co

21、nstituent names 3 3.3 Conventions 4 4 Relationship to other International Standardized profiles 4 5 Conformance 4 5.1 Data stream conformance 4 5.2 Implementation conformance 4 6 Characteristics supported by this part of ISO/IEC ISP15124 5 6.1 Overview 5 6.2 Logical constituents 5 6.3 Layout constit

22、uents 5 6.3.1 Overview of the layout characteristics 6 6.3.2 DocumentLayoutRoot 6 6.3.3 Page characteristics 6 6.3.3.1 CompositePage 6 6.3.3.2 Page dimensions 7 6.3.3.3 Nominal page sizes 7 6.3.4 OriginalImage 7 6.3.5 RevisionAnnotation 7 6.3.6 SpecificBlock 7 6.3.7 GenericBlock 7 6.4 Document layou

23、t characteristics 11 6.5 Content layout and imaging control 11 6.5.1 Raster graphics content 11 6.5.1.1 Introduction 11 6.5.1.2 Raster graphics content architecture 11 6.5.1.3 Raster graphics encoding methods 11 6.5.1.4 Raster presentation 12 6.5.2 Character content 12 6.5.2.1 Character content arch

24、itecture class 13 6.5.2.2 Character repertoires 13 6.5.2.3 Code extension techniques 13 6.5.2.4 Line spacing 15 6.5.2.5 Character spacing 15 6.5.2.6 Character path and line progression 16 6.5.2.7 Character orientation 16 6.5.2.8 Emphasis 16 6.5.2.9 Tabulation 16 6.5.2.10 Alignment 17 6.5.2.11 Fonts

25、17ENISP15124-1:1998 BSI 04-2000 iii Page 6.5.2.12 Reverse character strings 17 6.5.2.13 Superscripts and subscripts 17 6.5.2.14 Substitution of characters 17 6.5.2.15 Use of control functions 18 6.5.3 Geometric graphics content 18 6.6 Miscellaneous features 18 6.6.1 Resource documents 18 6.6.2 Appli

26、cation comments 18 6.7 Document management features 19 6.7.1 Document constituent information 19 6.7.2 Document characteristics 19 6.7.3 Non-basic document characteristics 19 6.7.3.1 Profile character sets 19 6.7.4 Document management attributes 20 7 Specification of constituent constraints 20 7.1 N

27、otation 20 7.2 Document profile constituent constraints 21 7.2.1 Macro definitions 21 7.2.2 Constituent constraints 26 7.2.2.1 DocumentProfile 26 7.3 Logical constituent constraints 29 7.4 Layout constituent constraints 29 7.4.1 Macro definitions 29 7.4.2 Factor constraints 29 7.4.3 Constituent cons

28、traints 29 7.4.3.1 DocumentLayoutRoot 29 7.4.3.2 CompositePage 29 7.4.3.3 OriginalImage 30 7.4.3.4 RevisionAnnotation 30 7.4.3.5 SpecificBlock 31 7.4.3.6 GenericBlock 32 7.5 Layout style constraints 33 7.6 Presentation style constraints 33 7.6.1 Macro definitions 33 7.6.2 Factor constraints 33 7.6.3

29、 Presentation style constituent constraint 33 7.6.3.1 PStyle1 33 7.6.3.2 PStyle2 33 7.6.3.3 PStyle3 34 7.7 Content portion constraints 34 7.7.1 Macro definitions 34 7.7.2 Factor constraints 34 7.7.3 Constituent constraints 34 7.7.3.1 Character content portion 34 7.7.3.2 Raster graphics content porti

30、on 35 7.7.3.3 Geometric graphics content portion 35 7.8 Additional usage constraints 35 8 Interchange format 36ENISP15124-1:1998 iv BSI 04-2000 Page 8.1 Interchange format ODIF (class A) 36 8.1.1 Interchange format 36 8.1.2 DAP identifier 36 8.1.3 Encoding of application comments 36 8.2 Interchange

31、format SDIF 36 8.2.1 Interchange format 36 8.2.2 DAP identifier 36 8.2.3 Encoding of application comments 37 8.3 Encoding of raster content information 37 Annex A (normative) Amendments and corrigenda 38 A.1 Amendments 38 A.1.1 Amendments to the base standard 38 A.2 Corrigenda 38 A.2.1 Corrigenda to

32、 this part of ISO/IEC ISP15124 38 Annex B (informative) Recommended practices 38 B.1 Transfer methods for ODA 38 B.1.1 Conveyance of ODA over ITU X.400:1984 38 B.1.2 Conveyance of ODA over FTAM 38 B.1.3 Conveyance of ODA over DTAM 38 B.1.4 Conveyance of ODA over flexible disks 39 B.2 Font reference

33、39 B.3 ISO/IEC8632 (CGM) Constraints for this International Standardized profile 40 B.3.1 Delimiter elements 40 B.3.2 Metafile descriptor elements 40 B.3.3 Picture descriptor elements 40 B.3.4 Control elements 40 B.3.5 Graphical primitive elements 41 B.3.6 Attribute elements 41 B.3.7 External elemen

34、ts 42 B.4 Interoperability with SGML applications 42 Annex C (informative) References to other standards and registers Inside back cover Figure 1 Constituents 5 Figure 2 Document layout structure 6 Figure 3 Code extension features (basic case) 14 Figure 4 Code extension features (all possible cases)

35、 15 Table 1 Dimensions for various page sizes 8 Table 2 Layout attributes 8 Table 3 Content coding attributes 9 Table 4 Presentation attributes 9 Table 5 Document profile attributes 10 Table 6 Symbols to denote shift functions 21ENISP15124-1:1998 BSI 04-2000 v Foreword ISO (the International Organiz

36、ation for Standardization) and IEC (theInternational Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respec

37、tive organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of informatio

38、n technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC1. In addition to developing International Standards, ISO/IEC JTC1 has created a Special Group on Functional Standardization for the elaboration of International Standardized Profiles. An International Standardized Pr

39、ofile is an internationally agreed, harmonized document which identifies a standard or group of standards, together with options and parameters, necessary to accomplish a function or set of functions. Draft International Standardized Profiles are circulated to national bodies for voting. Publication

40、 as an International Standardized Profile requires approval by at least75% of the national bodies casting a vote. International Standardized Profile ISO/IEC ISP15124-1 was prepared with the collaboration of Asia-Oceania Workshop (AOW); European Workshop for Open Systems (EWOS); Open Systems Environm

41、ent Implementors Workshop (OIW). ISO/IEC ISP15124 consists of the following part, under the general title Information technology International Standardized Profile FOD126 Open Document Format: Image Applications Enhanced document structure Character, raster graphics, and geometric graphics content a

42、rchitecture: Part1: Document Application Profile (DAP). Further parts may be added. Annex A forms an integral part of this part of ISO/IEC15124. Annex B and Annex C are for information only.vi blankENISP15124-1:1998 BSI 04-2000 1 Introduction This part of ISO/IEC ISP15124 is defined within the conte

43、xt of Functional Standardization, in accordance with the principles specified by ISO/IEC TR10000, “Framework and Taxonomy of International Standardized Profiles”. The context of Functional Standardization is one part of the overall field of Information Technology (IT) standardization activities, cov

44、ering base standards, profiles and registration mechanisms. An International Standardized Profile defines a combination of base standards that collectively perform a specific well-defined IT function. Profiles standardize the use of options and other variations in the base standards, and provide a b

45、asis for the development of uniform, internationally recognized conformance test suites. One of the most important roles for an ISP is to serve for the development (by organizations other than ISO and IEC) of internationally recognized tests and test centres. ISPs are produced not simply to “legitim

46、ize” a particular choice of base standards and options, but to promote real systems interoperability. The development and widespread acceptance of tests based on this and other ISPs is crucial to the successful realization of this goal. Development of this document application profile has been done

47、in close cooperation between several organizations. These include ODA expert groups within the Asia-Oceania Workshop (AOW), ITU-T Study Group8, European Workshop for Open Systems (EWOS) and OSE Implementors Workshop (OIW). The liaison between these organizations has occurred within meetings of the P

48、rofile Alignment Group for ODA (PAGODA). These meetings have focused on the development of a single set of Internationally aligned ODA document application profiles. This part of ISO/IEC ISP15124 is harmonized among the three workshops and has been ratified by the three workshops plenary assemblies.

49、 The purpose of ISO/IEC ISP15124 is to facilitate the interworking of basic image applications interchanging documents based on ITU-T Rec. T.410 series|ISO/IEC8613, Open Document Architecture (ODA) and Interchange Format. This part of ISO/IEC ISP15124 is suitable for interchanging documents in formatted form and has been defined in accordance with ITU-T Rec. T.411|ISO/IEC8613-1. The documents contain primarily raster graphics images but may also contain character and geometric graphics portions. The form