BS EN ISO 11806-1-2011 Agricultural and forestry machinery Safety requirements and testing for portable hand-held powered brush-cutters and grass-trimmers Machines fitted with an i.pdf

《BS EN ISO 11806-1-2011 Agricultural and forestry machinery Safety requirements and testing for portable hand-held powered brush-cutters and grass-trimmers Machines fitted with an i.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 11806-1-2011 Agricultural and forestry machinery Safety requirements and testing for portable hand-held powered brush-cutters and grass-trimmers Machines fitted with an i.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 11806-1:2011Agricultural and forestry machinery Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmersPart 1: Machines fitted

2、 with an integral combustion engineCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11806-1:2011 BRITISH STANDARDNational forewordThis British Standard is the UK impleme

3、ntation of EN ISO 11806-1:2011. It supersedes BS EN ISO 11806:2008 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee AGE/29, Forestry machinery.A list of organizations represented on this committee can beobtained on request to its secretary.This publicati

4、on does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012 ISBN 978 0 580 66311 6 ICS 65.060.80 Compliance with a British Standard cannot confer immunity fr

5、omlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2012. Amendments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo rep

6、roduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11806-1 December 2011 ICS 65.060.80 English Version Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-t

7、rimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011) Matriel agricole et forestier - Exigences de scurit et essais pour dbroussailleuses et coupe-herbe portatifs moteur - Partie 1: Machines quipes dun moteur combustion interne intgr (ISO 11806-1:2011) Land- und for

8、stwirtschaftliche Maschinen - Sicherheitstechnische Anforderungen und Prfung fr tragbare handgehaltene motorbetriebene Freischneider und Grastrimmer - Teil 1: Maschinen mit Antrieb durch Verbrennungsmotor (ISO 11806-1:2011) This European Standard was approved by CEN on 30 November 2011. CEN members

9、are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application t

10、o the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

11、Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

12、Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any f

13、orm and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11806-1:2011: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11806-1:2011EN ISO 1180

14、6-1:2011 (E) 3 Foreword This document (EN ISO 11806-1:2011) has been prepared by Technical Committee ISO/TC 23 “Tractors and machinery for agriculture and forestry“ in collaboration with Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry” the secretariat of which is

15、held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility th

16、at some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Associatio

17、n, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement

18、this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerl

19、and and the United Kingdom. Endorsement notice The text of ISO 11806-1:2011 has been approved by CEN as a EN ISO 11806-1:2011 without any modification. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without

20、 license from IHS-,-,-BS EN ISO 11806-1:2011EN ISO 11806-1:2011 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the

21、European Free Trade Association to provide one means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at lea

22、st one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Direct

23、ives may be applicable to the product(s) falling within the scope of this standard. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11806-1:2011ISO 11806-1:2011(E) ISO

24、2011 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope 12 Normative references .13 Terms and definitions .24 Safety requirements and/or protective measures 44.1 General .44.2 Handles 54.3 Barrier and distance to cutting attachment for brush-cutters 64.4 Harness 74.5 Balance .84.6

25、Cutting-attachment strength 84.7 Cutting-attachment retention .84.8 Cutting-attachment guards .94.9 Transport cover 94.10 Length of flexible cutting lines 104.11 Engine starting device .104.12 Engine stopping device .104.13 Throttle control 104.14 Clutch .124.15 Tanks .124.16 Protection against cont

26、act with parts under high voltage .134.17 Protection against contact with hot parts 134.18 Exhaust gases 144.19 Vibration .144.20 Noise .144.21 Electromagnetic immunity 155 Information for use .155.1 Instruction handbook .155.2 Marking .175.3 Warnings 185.4 Test of labels .19Annex A (normative) Cutt

27、ing-attachment impact test 21Annex B (normative) Thrown objects test .23Annex C (informative) List of significant hazards 27Bibliography .29Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license fro

28、m IHS-,-,-BS EN ISO 11806-1:2011ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies(ISO member bodies). The work of preparing International Standards is normally carried out through ISOtechnical committees. Each member body interest

29、ed in a subject for which a technical committee has beenestablished has the right to be represented on that committee. International organizations, governmental andnon-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the InternationalElectrotechnical Commi

30、ssion (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standardsadoptedbythetechnicalcommi

31、tteesarecirculatedtothememberbodiesforvoting.PublicationasanInternationalStandardrequiresapprovalbyatleast75 %ofthememberbodiescastingavote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patentrights. ISO shall not be held responsible for ident

32、ifying any or all such patent rights.ISO 11806-1 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 17, Manually portable forest machinery.ThisfirsteditionofISO 11806-1cancelsandreplacesISO11806:1997,ofwhichitisalsoatechnicalrevision.I

33、SO 11806 consists of the following parts, under the general title Agricultural and forestry machinery Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers: Part 1: Machines fitted with an integral combustion engine Part 2: Machines for use with back-pack

34、power unitISO 11806-1:2011(E)iv ISO 2011 All rights reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11806-1:2011IntroductionThisdocumentisatype-Cstandardasstate

35、dinISO12100.The machinery concerned and the extent to which hazards, hazardous situations or hazardous events arecovered are indicated in the scope of this document.When requirements of this type-C standard are different from those which are stated in type-A or type-Bstandards, the requirements of t

36、his type-C standard take precedence over the requirements of the otherstandardsformachinesthathavebeendesignedandbuiltaccordingtotherequirementsofthistype-Cstandard.ISO 11806-1:2011(E) ISO 2011 All rights reserved vCopyright European Committee for Standardization Provided by IHS under license with C

37、ENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11806-1:2011Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11806-1:2011I

38、NTERNATIONAL STANDARD ISO 11806-1:2011(E)Agricultural and forestry machinery Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers Part 1: Machines fitted with an integral combustion engine1 ScopeThis part of ISO 11806 gives safety requirements and measure

39、s for their verification for the design andconstruction of portable hand-held, powered brush-cutters and grass-trimmers (hereafter called machines)having an integral combustion engine as their power unit and mechanical power transmission between thepower source and the cutting attachment. Methods fo

40、r the elimination or reduction of hazards arising from theuseofthesemachinesandthetypeofinformationonsafeworkingpracticestobeprovidedbythemanufacturerare specified.This part of ISO 11806 deals with all significant hazards, hazardous situations and hazardous events relevantto these machines, as well

41、as when they are used as intended and under conditions of misuse which arereasonably foreseeable by the manufacturer.This part of ISO 11806 is not applicable to machines equipped with metallic cutting attachments consisting ofmore than one piece, e.g. pivoting chains or flail blades.NOTE SeeAnnex Cf

42、oralistofsignificanthazards.This part of ISO 11806 is applicable to portable, hand-held, powered brush-cutters and grass-trimmersmanufacturedafteritsdateofpublication.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For datedreferences,

43、 only the edition cited applies. For undated references, the latest edition of the referenced document(including any amendments) applies.ISO 683-9:1988, Heat-treatable steel, alloy steels and free-cutting steels Part 9: Wrought free-cutting steelsISO 7112, Machinery for forestry Portable brush-cutte

44、rs and grass-trimmers VocabularyISO 7113:1999, Portable hand-held forestry machines Cutting attachments for brush cutters Single-piece metal bladesISO 7918, Forestry machinery Portable brush-cutters and grass-trimmers Cutting attachment guard dimensionsISO 8380, Forestry machinery Portable brush-cut

45、ters and grass-trimmers Cutting attachment guard strengthISO 8893, Forestry machinery Portable brush-cutters and grass-trimmers Engine performance and fuel consumptionISO/TR 11688-1,Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: PlanningISO 12100:2010, Saf

46、ety of machinery General principles for design Risk assessment and risk reduction ISO 2011 All rights reserved 1Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11806-1:

47、2011ISO 13857:2008, Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbsISO 14982:1998, Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteriaISO 22867, Forestry and gardening machinery Vibration test code

48、 for portable hand-held machines with internal combustion engine Vibration at the handlesISO 22868,Forestry and gardening machinery Noise test code for portable hand-held machines with internal combustion engine Engineering method (Grade 2 accuracy)IEC 60745-1:2006, Hand-held motor-operated electric tools Safety Part 1: General requirements3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 7112, ISO 12100 and the followingapply.NOTE Figure 1provid