BS EN ISO 10991-2009 Micro process engineering - Vocabulary《微处理技术 词汇表》.pdf

《BS EN ISO 10991-2009 Micro process engineering - Vocabulary《微处理技术 词汇表》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 10991-2009 Micro process engineering - Vocabulary《微处理技术 词汇表》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO10991:2009ICS 01.040.71; 71.040.10NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDMicro processengineering Vocabulary (ISO10991:2009)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/03/2010 08:40, Uncontrolled Copy, (c) BSIThis British Standard

2、 was published under the authority of the Standards Policy and Strategy Committee on 31 January2010 BSI 2010ISBN 978 0 580 62206 9Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 10991:2009National forewordThis British Standard is the UK implementation of EN ISO 10991:2009. The U

3、K participation in its preparation was entrusted to Technical Committee LBI/36/1, General and volumetric, glass and plastics apparatus.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary prov

4、isions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/03/2010 08:40, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NOR

5、M EN ISO 10991 November 2009 ICS 71.040.10; 01.040.71 English Version Micro process engineering - Vocabulary (ISO 10991:2009) Gnie des microprocds - Vocabulaire (ISO 10991:2009) Mikroverfahrenstechnik - Begriffe (ISO 10991:2009) This European Standard was approved by CEN on 28 October 2009. CEN memb

6、ers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicati

7、on to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has t

8、he same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu

9、gal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means

10、reserved worldwide for CEN national Members. Ref. No. EN ISO 10991:2009: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/03/2010 08:40, Uncontrolled Copy, (c) BSIEN ISO 10991:2009 (E) 3 Foreword This document (EN ISO 10991:2009) has been prepared by Technical Committee ISO/TC 48 “Laborato

11、ry equipment“ in collaboration with Technical Committee CEN/TC 332 “Laboratory equipment” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and con

12、flicting national standards shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to

13、 the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lith

14、uania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10991:2009 has been approved by CEN as a EN ISO 10991:2009 without any modification. BS EN ISO 10991:2009Licensed Copy:

15、Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/03/2010 08:40, Uncontrolled Copy, (c) BSIISO 10991:2009(E/F) ISO 2009 All rights reserved/Tous droits rservs iiiContents Page Foreword vi 1 Scope1 2 Basic terms of micro process engineering 1 3 Terms related to components of micro process engineering 4 4 Te

16、rms related to interfacing of micro process engineering .6 BS EN ISO 10991:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/03/2010 08:40, Uncontrolled Copy, (c) BSIISO 10991:2009(E/F) iv ISO 2009 All rights reserved/Tous droits rservsSommaire Page Avant-propos vii 1 Domaine dapplicatio

17、n.1 2 Principaux termes utiliss en gnie des microprocds 1 3 Termes lis aux composants de gnie des microprocds4 4 Termes lis linterfaage en gnie des microprocds 6 BS EN ISO 10991:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/03/2010 08:40, Uncontrolled Copy, (c) BSIISO 10991:2009(E/F)

18、 ISO 2009 All rights reserved/Tous droits rservs vInhalt Vorwort .viii 1 Anwendungsbereich .1 2 Grundlegende Begriffe1 3 Begriffe zu Komponenten.4 4 Begriffe zu Schnittstellen .6 BS EN ISO 10991:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/03/2010 08:40, Uncontrolled Copy, (c) BSIIS

19、O 10991:2009(E/F) vi ISO 2009 All rights reserved/Tous droits rservsForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technica

20、l committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely wit

21、h the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft Inter

22、national Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may

23、 be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10991 was prepared by Technical Committee ISO/TC 48, Laboratory equipment. BS EN ISO 10991:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/03/2010 08:40, Uncontrolled

24、Copy, (c) BSIISO 10991:2009(E/F) ISO 2009 All rights reserved/Tous droits rservs viiAvant-propos LISO (Organisation internationale de normalisation) est une fdration mondiale dorganismes nationaux de normalisation (comits membres de lISO). Llaboration des Normes internationales est en gnral confie a

25、ux comits techniques de lISO. Chaque comit membre intress par une tude a le droit de faire partie du comit technique cr cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec lISO participent galement aux travaux. LISO collabore troitement avec la Com

26、mission lectrotechnique internationale (CEI) en ce qui concerne la normalisation lectrotechnique. Les Normes internationales sont rdiges conformment aux rgles donnes dans les Directives ISO/CEI, Partie 2. La tche principale des comits techniques est dlaborer les Normes internationales. Les projets d

27、e Normes internationales adopts par les comits techniques sont soumis aux comits membres pour vote. Leur publication comme Normes internationales requiert lapprobation de 75 % au moins des comits membres votants. Lattention est appele sur le fait que certains des lments du prsent document peuvent fa

28、ire lobjet de droits de proprit intellectuelle ou de droits analogues. LISO ne saurait tre tenue pour responsable de ne pas avoir identifi de tels droits de proprit et averti de leur existence. LISO 10991 a t labore par le comit technique ISO/TC 48, quipement de laboratoire. BS EN ISO 10991:2009Lice

29、nsed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/03/2010 08:40, Uncontrolled Copy, (c) BSIISO 10991:2009(E/F) viii ISO 2009 All rights reserved/Tous droits rservsVorwort Die ISO (Internationale Organisation fr Normung) ist die weltweite Vereinigung nationaler Normungsinstitute (ISO-Mitgliedskrp

30、erschaften). Die Erarbeitung Internationaler Normen obliegt den Technischen Komitees der ISO. Jede Mitgliedskrperschaft, die sich fr ein Thema interessiert, fr das ein Technisches Komitee eingesetzt wurde, ist berechtigt, in diesem Komitee mitzuarbeiten. Internationale (staatliche und nichtstaatlich

31、e) Organisationen, die mit der ISO in Verbindung stehen, sind an den Arbeiten ebenfalls beteiligt. Die ISO arbeitet bei allen Angelegenheiten der elektrotechnischen Normung eng mit der Internationalen Elektrotechnischen Kommission (IEC) zusammen. Internationale Normen werden in bereinstimmung mit de

32、n Gestaltungsregeln der ISO/IEC-Direktiven, Teil 2, erarbeitet. Die Hauptaufgabe von Technischen Komitees ist die Erarbeitung Internationaler Normen. Die von den Technischen Komitees verabschiedeten internationalen Norm-Entwrfe werden den Mitgliedskrperschaften zur Abstimmung vorgelegt. Die Verffent

33、lichung als Internationale Norm erfordert Zustimmung von mindestens 75 % der abstimmenden Mitgliedskrperschaften. Es wird auf die Mglichkeit aufmerksam gemacht, dass einige der Festlegungen in diesem Dokument Gegenstand von Patentrechten sein knnen. Die ISO ist nicht dafr verantwortlich, einzelne od

34、er alle solcher Patentrechte zu kennzeichnen. ISO 10991 wurde vom Technischen Komitee ISO/TC 48, Laboratory equipment erarbeitet. BS EN ISO 10991:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/03/2010 08:40, Uncontrolled Copy, (c) BSIINTERNATIONAL STANDARD NORME INTERNATIONALE ISO 109

35、91:2009(E/F) ISO 2009 All rights reserved/Tous droits rservs 1Micro process engineering Vocabulary Gnie des microprocds Vocabulaire Mikroverfahrenstechnik Begriffe 1 Scope 1 Domaine dapplication 1 Anwendungsbereich This International Standard gives terms and definitions for micro process engineering

36、 applied in chemistry, pharmacy, biotech-nology and food technology. La prsente Norme internationale tablit les termes et dfinitions employs dans le domaine du gnie des microprocds appliqu la chimie, la pharmacologie, la biotechnologie et la techno-logie alimentaire. Diese internationale Norm legt B

37、egriffe fest, die fr die Mikroverfahrenstechnik in Chemie, Pharmazie, Biotechnologie und Lebensmitteltechnik verwendet werden. 2 Basic terms of micro process engineering 2 Principaux termes utiliss en gnie des microprocds 2 Grundlegende Begriffe der Mikroverfahrenstechnik2.1 process engineering carr

38、ying out of physical, chemical and biological processes in technical apparatus 2.1 gnie des procds excution de procds physique, chimique et biologique dans un appareillage technique 2.1 Verfahrenstechnik Durchfhrung physikalischer, chemischer und biologischer Prozesse innerhalb technischer Apparate

39、BS EN ISO 10991:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/03/2010 08:40, Uncontrolled Copy, (c) BSIISO 10991:2009(E/F) 2 ISO 2009 All rights reserved/Tous droits rservs2.2 micro process engineering process engineering (2.1) in technical apparatus having internal dimensions in the

40、 range of micrometres to a few millimetres 2.2 gnie des microprocds gnie des procds (2.1) excuts dans un appareillage technique dont les dimensions internes varient des micromtres quelques millimtres 2.2 Mikroverfahrenstechnik Verfahrenstechnik (2.1) in tech-nischen Apparaten, deren innere Geometrie

41、n Abmessungen im Mikrometerbereich bis zu wenigen Millimetern aufweisen 2.3 reaction engineering carrying out of chemical processes (“reactions”) in technical apparatus NOTE Reaction engineering is an important branch of process engineering (2.1), as are mechanical process engineering and thermal pr

42、ocess engineering. 2.3 gnie des ractions excution de procds chimiques (ractions) dans un appareillage technique NOTE Le gnie des ractions est lun des grands domaines du gnie des procds (2.1), tout comme le gnie des procds mcaniques et le gnie des procds thermiques. 2.3 Reaktionstechnik Durchfhrung c

43、hemischer Prozesse (Reaktionen, Stoffumwandlungen”) innerhalb technischer Apparate ANMERKUNG Die Reaktionstechnik ist wie die mechanische und die thermische Verfahrenstechnik ein wichtiger Zweig der Verfahrenstechnik(2.1). 2.4 micro reaction engineering reaction engineering (2.3) in technical appara

44、tus having internal dimensions in the range of micrometres to a few millimetres 2.4 gnie des microractions gnie des ractions (2.3) excutes dans un appareillage technique dont les dimensions internes varient des micromtres quelques millimtres 2.4 Mikroreaktionstechnik Reaktionstechnik (2.3) in tech-n

45、ischen Apparaten, deren innere Geometrien Abmessungen im Mikrometerbereich bis zu wenigen Millimetern aufweisen 2.5 micro fluidics handling of fluids in technical apparatus having internal dimen-sions in the range of micrometres up to a few millimetres 2.5 microfluidique manipulation de fluides excu

46、te dans un appareillage technique dont les dimensions internes varient des micromtres quelques millimtres 2.5 Mikrofluidik Handhaben von Fluiden in technischen Apparaten, deren innere Geometrien Abmessungen im Mikrometerbereich bis zu wenigen Millimetern aufweisen 2.6 micro system engineering micro

47、system technology combination of micro technologies such as micro electronics, micro sensorics, micro actorics and micro fluidics (2.5) 2.6 gnie des microsystmes technologie des microsystmes combinaison de microtechnologies telles que la microlectronique, la microsensorique, la micro-atorique et la

48、microfluidique (2.5) 2.6 Mikrosystemtechnik Kombination von Mikrotechniken, u. a. Mikroelektronik, Mikrosensor-technik, Mikroaktorik und Mikrofluidik (2.5) BS EN ISO 10991:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/03/2010 08:40, Uncontrolled Copy, (c) BSIISO 10991:2009(E/F) ISO 2

49、009 All rights reserved/Tous droits rservs 32.7 process intensification irregular increase in the economic or ecologic efficiency of physical, biotechnological and especially chemical processes, and generation of new products or product qualities by means of process engineering (2.1) NOTE Micro process engineer-ing (2.2) is an important tool fo