BS EN 63044-1-2017 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) General requirements《家用和建筑物电子系统(HBES)和建筑物自动化和控制系统(BACS) 通用要求》.pdf

《BS EN 63044-1-2017 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) General requirements《家用和建筑物电子系统(HBES)和建筑物自动化和控制系统(BACS) 通用要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 63044-1-2017 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) General requirements《家用和建筑物电子系统(HBES)和建筑物自动化和控制系统(BACS) 通用要求》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)Part 1: General requirementsBS EN 630441:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 63044-1April 2017ICS 29.120.01

2、; 29.120.99 Supersedes EN 50491-1:2014English VersionHome and Building Electronic Systems (HBES) and BuildingAutomation and Control Systems (BACS) -Part 1: General requirements(IEC 63044-1:2017)Systmes Electroniques pour les Foyers Domestiques etles Btiments (HBES) et Systmes de Gestion Technique du

3、 Btiment (SGTB) - Partie 1: Exigences gnrales(IEC 63044-1:2017)Allgemeine Anforderungen an die Elektrische Systemtechnik fr Heim und Gebude (ESHG) und an Systeme der Gebudeautomation (GA) -Teil 1: Allgemeine Anforderungen(IEC 63044-1:2017)This European Standard was approved by CENELEC on 2017-03-03.

4、 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained

5、on application to the CEN-CENELEC Management Centre or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the

6、CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungar

7、y, Iceland, Ireland, Italy, Latvia,Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,Switzerland, Turkey and the United Kingdom.European Committee for Electrotechnical StandardizationComit Europen de Normalisation Electrotechn

8、iqueEuropisches Komitee fr Elektrotechnische NormungCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Ref. No. EN 63044-1:2017 ENational forewordThis British Standard is the UK

9、implementation of EN 630441:2017. It is identical to IEC 630441:2017. It supersedes BS EN 50491-1:2014 which will be withdrawn on 3 March 2018.The UK participation in its preparation was entrusted to Technical Committee PEL/23, Electrical accessories.A list of organizations represented on this commi

10、ttee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 93505 3ICS 29.120.

11、99; 29.120.01Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 6

12、30441:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 63044-1 April 2017 ICS 29.120.01; 29.120.99 Supersedes EN 50491-1:2014 English Version Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: General requirements (IEC 63044-1:2017) Systm

13、es Electroniques pour les Foyers Domestiques et les Btiments (HBES) et Systmes de Gestion Technique du Btiment (SGTB) - Partie 1: Exigences gnrales (IEC 63044-1:2017) Allgemeine Anforderungen an die Elektrische Systemtechnik fr Heim und Gebude (ESHG) und an Systeme der Gebudeautomation (GA) - Teil 1

14、: Allgemeine Anforderungen (IEC 63044-1:2017) This European Standard was approved by CENELEC on 2017-03-03. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alt

15、eration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other languag

16、e made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Cz

17、ech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

18、United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any mea

19、ns reserved worldwide for CENELEC Members. Ref. No. EN 63044-1:2017 E BS EN 630441:2017EN 63044-1:2017 2 European foreword The text of document 23/734/CDV, future edition 1 of IEC 63044-1, prepared by IEC/TC 23 “Electrical accessories“ was submitted to the IEC-CENELEC parallel vote and approved by C

20、ENELEC as EN 63044-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-12-03 latest date by which the national standards conflicting with the document have to be

21、 withdrawn (dow) 2018-03-03 This document supersedes EN 50491-1:2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement noti

22、ce The text of the International Standard IEC 63044-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 62820-1-1 NOTE Harmonized as EN 62820-1-1. IEC 62949 NO

23、TE Harmonized as EN 62949. IEC 63044-3 NOTE Harmonized as EN 63044-3. IEC 63044-5-1 NOTE Harmonized as EN 63044-5-1. IEC 63044-5-2 NOTE Harmonized as EN 63044-5-2. IEC 63044-5-3 NOTE Harmonized as EN 63044-5-3. 2 IEC 63044-1:2017 IEC 2017 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Te

24、rms, definitions and abbreviated terms 5 3.1 Terms and definitions 5 3.2 Abbreviated terms . 6 4 General requirements 6 5 Standardization structure . 7 5.1 Part 2: Environmental conditions . 7 5.2 Part 3: Electrical safety requirements 7 5.3 Part 4: Functional safety . 7 5.4 Part 5: EMC requirements

25、 . 7 5.4.1 Overview . 7 5.4.2 Part 5-1: EMC requirements, conditions and test set-up 7 5.4.3 Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments . 7 5.4.4 Part 5-3: EMC requirements for HBES/BACS used in industrial environments . 8 5.5 Part 6: P

26、lanning and installation of HBES . 8 6 HBES/BACS applications and clusters overview 8 Bibliography 11 Table 1 Summary of the most relevant application requirements 9 Table 2 Applications and clusters of services for HBES/BACS . 10 BS EN 630441:2017EN 63044-1:2017 2 European foreword The text of docu

27、ment 23/734/CDV, future edition 1 of IEC 63044-1, prepared by IEC/TC 23 “Electrical accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 63044-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publ

28、ication of an identical national standard or by endorsement (dop) 2017-12-03 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-03-03 This document supersedes EN 50491-1:2014. Attention is drawn to the possibility that some of the elements of th

29、is document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 63044-1:2017 was approved by CENELEC as a European Standard without any modification. In the

30、official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 62820-1-1 NOTE Harmonized as EN 62820-1-1. IEC 62949 NOTE Harmonized as EN 62949. IEC 63044-3 NOTE Harmonized as EN 63044-3. IEC 63044-5-1 NOTE Harmonized as EN 63044-5-1. IEC 63044-5-2 NOTE Har

31、monized as EN 63044-5-2. IEC 63044-5-3 NOTE Harmonized as EN 63044-5-3. 2 IEC 63044-1:2017 IEC 2017 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms, definitions and abbreviated terms 5 3.1 Terms and definitions 5 3.2 Abbreviated terms . 6 4 General requirements 6 5 Standardization s

32、tructure . 7 5.1 Part 2: Environmental conditions . 7 5.2 Part 3: Electrical safety requirements 7 5.3 Part 4: Functional safety . 7 5.4 Part 5: EMC requirements . 7 5.4.1 Overview . 7 5.4.2 Part 5-1: EMC requirements, conditions and test set-up 7 5.4.3 Part 5-2: EMC requirements for HBES/BACS used

33、in residential, commercial and light-industrial environments . 7 5.4.4 Part 5-3: EMC requirements for HBES/BACS used in industrial environments . 8 5.5 Part 6: Planning and installation of HBES . 8 6 HBES/BACS applications and clusters overview 8 Bibliography 11 Table 1 Summary of the most relevant

34、application requirements 9 Table 2 Applications and clusters of services for HBES/BACS . 10 BS EN 630441:2017IEC 63044-1:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) Part 1: General requirem

35、ents FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization i

36、n the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrus

37、ted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the Internat

38、ional Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since eac

39、h technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IE

40、C Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in the

41、ir national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessm

42、ent services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employe

43、es, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the p

44、ublication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the pos

45、sibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 63044-1 has been prepared by IEC technical committee 23: Electrical accessories. A list of all p

46、arts in the IEC 63044 series, published under the general title Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS), can be found on the IEC website. The text of this International Standard is based on the following documents: CDV Report on voting 23/734/CD

47、V 23/746/RVC Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. BS EN 630441:2017IEC 63044-1:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUIL

48、DING AUTOMATION AND CONTROL SYSTEMS (BACS) Part 1: General requirements FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote inter

49、national co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in thi